Making an Old Moped Go Fast - Part 1 - 70cc Cylinder Kit Upgrade

No video

Making an Old Moped Go Fast - Part 1 - 70cc Cylinder Kit Upgrade

Рет қаралды 24,816

Күн бұрын

I am the proud owner of a 1980 Sachs Suburban moped. I use it to commute to class at my university. Problem is, it's really slow. Until now.
Reuploaded to improve video and voiceover quality.

Пікірлер: 46

@austinembry3226 5 жыл бұрын

I just picked up a 1980 Sachs Prima moped. It has been sitting forever and is going to need some work. Really love that I'm not the only one excited about working on one of these! Keep posting, I'm here for it!

@rainvillecreative5410 5 жыл бұрын

Awesome! These old mopeds are a lot of fun

@austinembry3226 5 жыл бұрын

@@rainvillecreative5410 Heck Yeah! Still working on getting mine running, but I am definitely excited to get to it. Any chance you got test out the new top speed on yours with this 70cc upgrade?

@gemihouston 2 жыл бұрын

How much did it cost ya? Im interrsted in one.

@austinembry3226 2 жыл бұрын

@@gemihouston The one I bought had a seized engine :( however I paid 100$

@6amamoeba677 5 жыл бұрын

Cant wait for the rest of the series. I just got into mopeds and its good to find other enthusiasts, especially ones who make videos. Entertaining stuff and i like the commentary, Keep it up.

@armandorodrigues2754 3 жыл бұрын

Amigalhaço responde precisava ir no as peças com o motor igual a

@nedaCFilms 2 жыл бұрын

Back in 1987 I installed a #58 main jet in it and it’s top speed increased a bit. I had the fastest moped in our Heck’s Angels club

@stefenmorant4778 5 жыл бұрын

I’ve got a ‘77 Sachs commuter, and not knowing jackshit about mopeds I brought it to a shop when it started running funny. Payed $100 bucks for them to ruin my starter when all I had to do was replace the decompression valve. Anyway I was planning on upgradeing it to compete with my other mopeds and learn more about how they work, and this series looks like it could be a great help. Only found it cause of reddit.

@Mr_Fancypants 5 жыл бұрын

Yea i own a special Sparta tour moped from 1975 and when i got it, it wasen't running. I didn't know jack shit about mopeds exept that they drive. So i messed around with it and got it to run. Not perfect, but the engine works. Exept it didn't drive. So i found this moped workshop close to me but to far away for me to drive to it on my moped. So i wend there in my car and fucking hell. They weren't able to help me because i need to bring the damn thing in first. So i wend back home and was like; fuck it. I am going to do it myself. So after like a week or 2 i got the damn thing all in order and now i drive every day on it! Once you understand how easy and simplistic they are you can literally do everything yourself. Got a pic of your moped? I would love to see. Here's mine: i.imgur.com/QnAej2l.jpg for some reason is the resulation weird...

@abipwn4472 Жыл бұрын

i love how when he sealed the block that thing started up like a 2 stroke x)!

@cliffp2490 2 жыл бұрын

😂😂😂 that’s so funny, I’m literally in the middle of a conversation right now about where’s safe to ride it. The way people drive nowadays, I don’t know many places where it’s safe to ride it.

@stanshingler 5 жыл бұрын

Great job! Hoping my upcoming builds work out this nice.

@sdrefcfdsunartonnh6089 4 жыл бұрын

Suyrgbbfbjyfo

@sdrefcfdsunartonnh6089 4 жыл бұрын

Suyrgbbfbjyfo

@2KCamaroZ28SS 2 жыл бұрын

OMG that's the cutest little piston

@MopedFactory 5 жыл бұрын

Great Video 👍 keep Up the good work.

@mopedmax2935 4 жыл бұрын

Servus Moped Factory 🙋‍♂️

@cliffp2490 2 жыл бұрын

Like the cylinder upgrade kit /

@marioeggenmueller5985 3 жыл бұрын

thats made in Germany, I got the self one, made in 1993, over 50000 km and its run all Time

@ewandixon5465 5 жыл бұрын

how did you start it without air box complete

@cliffp2490 2 жыл бұрын

Thank you, I will try treat and today.

@ml-w6130 2 жыл бұрын

Nice video, where did you get the 70cc?

@joewyatt2407 4 жыл бұрын

👍 nice mate!

@shamanofsexy123 5 жыл бұрын

Where’s part 2 m8? Great video!

@lucagredig5287 5 жыл бұрын

Where are you from? Because I live in Switzerland and here you can drive these withthe age of 14. I own 2 of these Bikes and in case you wanna know how they look like my first „Mofa“ was a Sachs luxe 623 it drives around 40 „Km/h“ The second bike is a Pony GTX in green but the older version

@davids8449 4 жыл бұрын

Let's see you take the piston pin out

@niamhsdad1960 4 жыл бұрын

I’ve never seen a combined head and barrel

@marcossierra8563 3 жыл бұрын

We're i can Buy te kit

@rainvillecreative5410 3 жыл бұрын

treatland

@davids8449 4 жыл бұрын

Let's see you put the piston pin back

@timoehrle145 4 жыл бұрын

You defently need to replace the old 10mm bing carburator whit a bigger one 13-19mm

@rainvillecreative5410 4 жыл бұрын

Yep the next video is on installing an 18mm Mikuni carb, really helped open it up

@mrGW 2 жыл бұрын

You sure that square bing is 15mm? Never seen a square 15mm

@rainvillecreative5410 2 жыл бұрын

Whatever the stock size was, could be a 12mm

@raingoat271 4 ай бұрын

@@rainvillecreative5410 they came in 10/12/15mm at least on the stuff we got here in norway

@cliffp2490 2 жыл бұрын

Do you still have your sachs moped? Where would you order parts from

@rainvillecreative5410 2 жыл бұрын

Nah I sold it a couple years ago, don't live in a good area for riding these. Look up treatland, they've got all sorts of stuff.

@cliffp2490 2 жыл бұрын

treatland

@user-kc2bj3er9c 2 жыл бұрын

ผมมีอยู่สามคันใครสนใจติดต่อได้สภาพ95

@DS-Turbo 2 жыл бұрын

You did nothing to explain about the parts you put back on the machine. Is that the same stock head cleaned up or aftermarket. Is that the same piston or aftermarket and is there more compression and what is it stock and what is it now. Things like this make a video. Not just taking something apart and putting it back together. Need some substance.

@davids8449 4 жыл бұрын

It's an American video alright