In this review, my experiments lead to awesome results! Get the 3Doodler Start here: goo.gl/qMPUOY ((( use code 'MKEANY3D' at checkout for 10% off! ))) this pen was sent to me for free in exchange for an unbiased review
Пікірлер: 814
@lavenchie26297 жыл бұрын
The things that you're always able to freehand always looks so aesthetically pleasing that it's hard to convince me that you didn't pre plan the patterns on the balloon. And how you just could turn that into a lamp shade with one of the most gorgeous shadows I've even seen. The ingenuity required to be able to turn just a medium of drawing into absolutely stunning creations that I'm in awe. Keep up the good work my dude and I'm looking forward to your next video
@make.anything7 жыл бұрын
I was really lucky with this one :)
@moosieplays27737 жыл бұрын
Lavenchie I subscribed to you
@dans17ft.dimple797 жыл бұрын
Make Anything // 3D Printing Channel is this easy to use and draw with and set up because I might want it for Christmas 👍
@snowstarsparkle7 жыл бұрын
Ella Thompson me too! It looks so cool!
@ahteshamtanoli33832 жыл бұрын
@@moosieplays2773 I
@richardcurrier7 жыл бұрын
What an amazing imagination. Thank you Devon ...YEAH!
@devxgamer04467 жыл бұрын
Richard Currier I think his name is devin not Devon?
@kaydasteele7037 жыл бұрын
Devxgamer 04 It's just the way he spelled his name it still the same name just spelled differently but pronounced the same
@audreycolet7 жыл бұрын
Devxgamer 04 yeah its Devin , Devin Montes look at the end of the video
@blackops83217 жыл бұрын
Audrey Colet r
@juanflys7 жыл бұрын
How to get the shape 100% round again? Just inflate another balloon inside it. This time it wont stick and you just need to deflate it afterwards
@river31046 жыл бұрын
JJB that's makes so much sense!
@BaddaBigBoom5 жыл бұрын
Maybe gently warm it up first with a hairdryer.
@murphymc7 жыл бұрын
Just this morning I started watching these videos and I was hoping you would review this.
@symonkeener9077 жыл бұрын
murphyproductions yeah.
@zora61317 жыл бұрын
omg you're so patient
@jasminereza33963 жыл бұрын
Yeah
@maralganbat54753 жыл бұрын
OMG YES
@hibahahmed83227 жыл бұрын
Maybe adding hairspray would help it get less stuck to the balloon. I love this idea 💡
@make.anything7 жыл бұрын
+Hibah Ahmed I agree, this may be the way to go.. I'll have to try it out some time!
@pewdspoods637 жыл бұрын
Mintlucky Reborn fuck you
@tylermay97287 жыл бұрын
Hibah Ahmed idk because in his last video he used it to make it stick more but who knows it could work
@jamskof4 жыл бұрын
@@make.anything HAIRSPRAY IS FLAMMABLE
@maxburczyk11594 жыл бұрын
@@pewdspoods63 bad day?
@oofoo51866 жыл бұрын
You are absolutely amazing with 3D pens and printing!! I have been binge watching a bunch of your videos and I subscribed after the first one I saw from you! Your very creative and I love your imagination and skill. And the things you make and the music you add to videos is very pleasing
@salomeremaud1787 жыл бұрын
Probably the most amazing thing i've seen for weeks! I was almost scared when you were saving your doodle, glad it came out well :)
@torisharba63787 жыл бұрын
Ok I have been addicted to your videos since I found this channel yesterday! You're so intelligent and creative!
@meh73857 жыл бұрын
same
@mareg39655 жыл бұрын
Same here. :D
@Pile_of_carbon7 жыл бұрын
I _never_ thought it would work on the balloon. Mind slightly blown. The end result was amazing.
@mandy83927 жыл бұрын
Just heard about this from a kid and immediately went to your channel. Brilliant work! I love how you're truly looking outside the box. Thanks!
@geturinkup3 жыл бұрын
You are just making the most creative things with both pens. I really enjoy your chanel Devon
@paich2187 жыл бұрын
I love this channel it's so cool to see how these pens work it's just amazing that one little pen can do so much
@user-ro9vq6rh8d7 жыл бұрын
Wow, I was not expecting that at all. I love the unpredictability of these videos. Nice one!
@samquiltin67517 жыл бұрын
I Love The Art That You Did With The Balloon!!!
@wafflenugget73937 жыл бұрын
Man, what you create is an inspiration for art itself
@lucyportway97337 жыл бұрын
It looks so amazing as a light! Well done!
@stellasadie75176 жыл бұрын
I love your videos! You're always so creative :). I'm getting this pen soon and I can't wait to use it!!
@sofiawallace86397 жыл бұрын
Thank you so much for introducing me to this pen!! Me and my little sisters love it!!
@pfontaine237 жыл бұрын
Great video and a great idea. Thank you for posting and looking forward to what you create next!
@gelm99927 жыл бұрын
*wow thats sooo beautiful! i LOVE and want that masterpiece! youre so talented and creative!*
@philm18937 жыл бұрын
You are so creative and good at this stuff
@FuriosasWarRig7 жыл бұрын
Your videos always seem to help calm my anxiety. And you are so precious
@reggieguevara80255 жыл бұрын
Awesome videos! Are unused plastic easy to remove on both the Start & Create 3Doodler models?
@fofo93m7 жыл бұрын
Back at it again with the creativity, keep up the good work buddy, totally buying one from my two little cousins, also, looking forward to your next solidworks project!
@Yababaneta7 жыл бұрын
Watching you use this on that balloon makes me want this version as well! I have a fondness for hot air balloons and I can see myself making some to hang around the house with this! ^_^
@make.anything7 жыл бұрын
Yababaneta that would be perfect!
@itsfrosty58527 жыл бұрын
Yababaneta that would be cool!!!
@LiLiJughead5 жыл бұрын
Twig321 that's a great idea!
@jessr.83177 жыл бұрын
I feel like if it's so low temperature, and melts quickly, then it would melt under the heat of the sun on a hot summer day😁
@lucymineplay10127 жыл бұрын
Çhæntæł III Not where i live.
@keyanalove32796 жыл бұрын
Or if the light bulb gets too hot
@iwanttobelieve54846 жыл бұрын
There’s prolly a mechanism inside that’s hotter and it’s just the outside that’s cooler
@autonomous20103 жыл бұрын
"Low Temperature" in this context is relative to material terms. The PLA I work with melts at 365 degrees fahrenheit. Much hotter than any summer day.
@Tom-gu6ye7 жыл бұрын
Your 3D Pen videos are amazing! It's how I found your channel and subscribed! Keep making them, I recommend looking at the Lix pen if you haven't already, that one seems cool!
@olenkam848 ай бұрын
thank you for this review. my son wanted this 3doodler pen, but I wasn't convinced, but now I actually want to use it myself LOL that looks like a great fun and he will definitely gonna get it :) great stuff with this balloon project - this turned our really cool :)
@coensalamanca42937 жыл бұрын
Mathias you inspire me thank you for all you do
@noway16357 жыл бұрын
The light project is awesome. Well done.
@fozra7 жыл бұрын
do you think spraying the balloon down with silicone (allowing it to dry) would help keep it from bonding/sticking to the latex?
@OfficialTeeg3227 жыл бұрын
you do an amazing job with these videos! I love watching what you come up with! keep it up! :D
@lav54036 ай бұрын
Hey, great video. Love the balloon art and end result. Can you advise where I can buy the green stencils you show in this video please? Thanks 😊
@chrinamint7 жыл бұрын
It was so awesome the other day when I was googling around about 3d pens an article came up about a contest and you were in there as the winner of one of the categories with this lamp thing! I was feeling proud for you! I was like, "that's my guy!", even tho I only know you from yt. Haha! Way to go!
@kasimirnerium6 жыл бұрын
Does the 3Doodler Start last for longer than a couple of months? Just wondering, because of the temperature change, and I don't know how that would affect it.
@bexterollie7 жыл бұрын
Kids in Africa could have eaten his patience.
@soomiandme7 жыл бұрын
Bexter ollie OMG NO STOP THE TREND
@camielise44216 жыл бұрын
You're such a creative person. I'm looking into getting my first 3D pen. I've been watching your 3D pen videos to try and guide my decision. I love all kinds of art. I love to draw but lately I've just wanted to something different. This is perfect. I'm leaning towards the lid, 3doodler 2.0, or scribbler. It's so hard to choose
@TheresaMueller7 жыл бұрын
Thanks for your great demo-video! You are really so creative! Do you think, it would get off easier and not stick so much to the balloon if you greased the rubber balloon surface with coconut oil? BTW - how do the filaments smell? Can you add sence to them?
@lanaayz59916 жыл бұрын
Thanks for your video!awsome idea with the baloon. can you tell me,how long did last your job without charging the pen? I have this pen and it does not works even a half an hour... And my kid cant use it because its really slow(((((the plastic does not melt so good as in your video.
@emilyincharge7 жыл бұрын
that's really cool! it looks awesome. did the light bulb not warp the plastic?
@LeOrangeFTW7 жыл бұрын
hi, hope you have the time to reply, how much stronger are PLA and ABS compared to the eco friendly plastic of the 3doodler start? and do you think it's more cost effective to buy a pen that can use spools rather than rods?
@lizabeller7 жыл бұрын
Am I the only one bothered by that one big zig-zag...
@asparagus4life7 жыл бұрын
Fluffy popcorn Nope >.< I'm a bit of a perfectionist (not in a bad way, haha)
@snatchedbatch43115 жыл бұрын
Yes but only because the rest of it was near perfect. He did awesome tho.
@BaddaBigBoom5 жыл бұрын
Great review, great creativity and amazing patience. Thumbs up.
@tewesathemonkey7 жыл бұрын
Voila! What a cool creation and excellent tutorial. Devon, Your "voice" is perfect for hosting shows and giving instructions. Our tweens love you...they said, YOU SUPER ROCK! ;-D THANKS FOR SHARING
@Windxchild7 жыл бұрын
I want that lamp! Do you think that there are ways to make the plastic stick to the balloon less? I'd like to make one, but releasing it from the balloon seems tough...
@lorenzovezio43647 жыл бұрын
hey Devin! Great video but i am wondering if i could use any other 3mm plastic with this pen. Thank you!
@make.anything7 жыл бұрын
Nope, it's a single temperature pen made for their special low-temperature filament
@yamahar8wme7 жыл бұрын
You have been extremely helpful my daughter asked for one for xmas and your videos helped me decide she is 10 really enjoy your videos many thanks
@lpssummertv24637 жыл бұрын
I love your channel! but, I have a few questions. does your 3doodler start get jammed? mine is and I cannot get it to work! also, do you have an idea of how I can fix it? thanks!
@liamkralik68077 жыл бұрын
devon, i bought a 3doodler start on amazon but i ran out of filament so i went in the store just a block away but there's only 3doodler create filament does the 3doodler create filament work with the 3doodler start?
@make.anything7 жыл бұрын
+Liam Kralik no, unfortunately you can only use the special 3Doodler start filament :/
@jordyn92387 жыл бұрын
Can you make a comparison video that includes all of the 3d pens and recommend the best one.
@helenemoen8357 жыл бұрын
I love watching your videos! so much creativity😌 btw you look really good with glasses 😅
@renidere7 жыл бұрын
Out of all of the 3D pens you have tried, which might you say is the easiest to use? Or the best quality? I'm looking to buy a 3D pen to start making some 3D art, but I don't want to buy multiple pens as I get better at making projects
@katoutofthebag48337 жыл бұрын
NekoGames I have tried all of his but I personally like the 3doodler pens
@spaghettibird6 жыл бұрын
He has a video on i
@yamahar8wme7 жыл бұрын
Thanks for this my daughter will love it perfect xmas present
@make.anything7 жыл бұрын
zuzana hall great! use the discount code in the description if you haven't already bought it :)
@yamahar8wme7 жыл бұрын
Unfortunately I can't add code due to being in the uk 🙁
@andyo36376 жыл бұрын
Wow!! That is mindblowing.
@Benjamin-vo1og7 жыл бұрын
your vids are so relaxing.
@ashleypatterson36546 жыл бұрын
your videos are soooooo relaxing
@krista73457 жыл бұрын
Which is more preferential to work with, using the sticks of filament with the 3doodler or a spool with a different pen? This is what's holding me back on going with the 3doodler.
@caitlynmaury95536 жыл бұрын
I have a 3doodler start but it is clear so you can see how it works it's not blue it's so cool I also got a little tube filled with the kids safe plastic and it comes with a little manual that you can doodle on
@SimonWillcockAntiques2 жыл бұрын
Any thoughts on what would make it easier to detach from the balloon? Cool vid
@AnnaSpinks7 жыл бұрын
Just wondering if there is a water soluble glue that it would be possible to coat the balloon in a layer of in first to make the removal easier.
@spikeydapikey14836 жыл бұрын
Balloon doodle reminds of the old balloon, string and glue objects they used to make back in the day, but with much better colours and less mess! How's it lasting with the heat from the lamp? Cheers.
@Susse97037 жыл бұрын
Try using some release agent on the balloon before you start printing on it. Loved it!
@afrenchguyinshanghai35637 жыл бұрын
hey devin wich one do you think is the best(i'm talking about the 3D pens )?btw great video
@cynthiacasey66315 жыл бұрын
Wow that was amazing how much filments are in the package and how does it cost is it possible to make it water poof could ir liquid s
@9catlover4 жыл бұрын
such a cool, cute and artistic project
@scorpiocat67207 жыл бұрын
I'm guessing that the ballon wouldn't let go of the plastic because the plastic would've been hot enough on contact to melt the balloons plastic just enough where it stuck together
@snowstarsparkle7 жыл бұрын
ScorpioCat balloons are latex,(rubber) not plastic but that makes a lot of sense!
@scorpiocat67207 жыл бұрын
Snowstar :D sorry had a brain fart XD
@lizabeller7 жыл бұрын
Plus he was proving it wouldn't burned you if you touched the tip
@arabella31816 жыл бұрын
I got this for x-mas and i love it!
@sweetflowerlollol7 жыл бұрын
So pretty :O Your accidents are beautiful.
@jasperella2747 жыл бұрын
Awesome video! Helped a lot!
@crystalgreen44357 жыл бұрын
Do you think that if you sprayed the balloon with a little cooking spray, the plastic may still stick but become detached more easily?
@vivekahuja80665 жыл бұрын
Can you please review the SanMoz 3d pen since there are no reviews online or on youtube?
@salemvega63157 жыл бұрын
this was really pleasing to watch
@anniewilling29757 жыл бұрын
out of all the 3D pens you've reviewed which one would you recommend
@make.anything7 жыл бұрын
both 3Doodler pens are great!
@dalislerma20017 жыл бұрын
Annabelle Willing 
@jaferlastname17607 жыл бұрын
Annabelle Willing 3Doodler create.
@OminousArtist7 жыл бұрын
I love the stencils. Kinda wished all the pens came with it
@PJ_Bottoms7 жыл бұрын
That looking freaking amazing.
@bojojojo15007 жыл бұрын
love how you learn
@chrinamint7 жыл бұрын
Wow...super cool end result!!
@adityapanda62127 жыл бұрын
wow. your freestyle is more intricate and detailed than my life.
@axelSixtySix7 жыл бұрын
I like your lamp! what about some wax or grease over the baloon prior to print on it ?
@CheerupButtercup7 жыл бұрын
WOW!!! Beautiful
@pokemontrainer13307 жыл бұрын
Amazing imagination you are perfect with this pen
@reeerinn7 жыл бұрын
so..which one your favourite 3D pen?i really want a 3D pen😭its seem fun...
@Aneloa38637 жыл бұрын
hy nice vidéo ! little question : at what point the plastic is hot when he's out of the 3D doodler pen ? approximately 😉
@bitupondeka91146 жыл бұрын
can we use other types of filament also???? like the long one
@annaleiceaaliyah49516 жыл бұрын
Can you use it while it's charging if you have a longer cord
@macwhite26687 жыл бұрын
What software do you use for 3-D printing
@nicolematonak94257 жыл бұрын
Has the filament melted on your lamp or from the light?
@make.anything7 жыл бұрын
Nicole Matonak nope, and I had it on for 5 hours straight during my grad show with no problems :)
@gunterjauchsbeautypalast96897 жыл бұрын
maybe you make a batman logo and attach it to a lamp sorry for the bad english im from germany 😉
@gunterjauchsbeautypalast96897 жыл бұрын
Serafina is SICK AS FRICK haha nice
@lolalib96427 жыл бұрын
Günter Jauch's Beautypalast
@emptytoiletpaperroll91127 жыл бұрын
#Cringe
@bellcau7 жыл бұрын
Great Britain oh wow
@emptytoiletpaperroll91127 жыл бұрын
Oops Sorry I should comment that on other video #Fail
@magicmyth26357 жыл бұрын
isnt it weir dthat the stuff dont stick too balon or that balon dont melt against it or got stuck? cuae its btoh platic right>?:(
@vlinderassistance29437 жыл бұрын
I am 15 years old and I was wondering, should I get the 3doodler start or the xyz da vinci pen? My budget is no more than 40 euros, what do you recommend?
@Jasmin-dk3be7 жыл бұрын
What pen do you prefer the 3Doodler create or start? I want to know because I would like to decorate but I don't know what Is the best one for what i want
@make.anything7 жыл бұрын
Well I haven't had so much time with either, but the 3Doodler Create is more advanced because of varying speeds, nozzles, and different plastics... so you can do a lot of different things. Start is limited to 1 plastic, 1 speed, 1 nozzle, but it's low temperature so you can draw on anything. So they're both good in their own ways
@Jasmin-dk3be7 жыл бұрын
Make Anything // 3D Printing Channel thank you did replying quickly. Also sorry I have one more question. Do you think that the hit plastic would burn or ruin anything in my room like wood shelf or plastic shelf?
@make.anything7 жыл бұрын
Not with the Start, but the Create could mess up your shelfs if you doodle directly on them. But you could put blue painters tape on your shelf, doodle on the tape, take of the tape, then glue it onto the shelf or whatever you'd like. After a few seconds though the plastic won't damage anything
@Jasmin-dk3be7 жыл бұрын
Make Anything // 3D Printing Channel awesome! Thanks so much
@AriaMontgomery7773 жыл бұрын
This is beautiful!!💖
@Nanamo0n7 жыл бұрын
Devin, in one of your videos about the 3D pen videos, you used a roll of the filament. I'm interested in getting the 3Doodler Creative, and would like to know if the rolled filaments could be used. If so, could you let me know what would be better brand? I'm a novice in this field, so if you could let me know a bit of info of the filament and what's the difference between the types. I'd greatly appreciate your input. Thanks.
@make.anything7 жыл бұрын
I haven't tried rolls for the 3Doodler. I've heard they could work, but because the filament won't be perfectly straight, it might clog more often. A lot of people ask this question, so I may have to test it out myself... I think maybe the filament could be straightened out into rods manually as well...
@carlysee57737 жыл бұрын
Nanamo0n se is a great man and a great man to be a man of t Is the best of me to love all of my life rat we all love it so
@krldwns7 жыл бұрын
if you put petroleum jelly on the balloon would it allow the plastic to form and set without sticking?
@jmenen937 жыл бұрын
Your so creative 😭😭😭👍🏼
@faabs21627 жыл бұрын
I reaaaaalllyyyyy like theas video, keep going!!
@alexis7786 жыл бұрын
I am obsessed with 3d pens now waaaa I want one
@vitorhercules7 жыл бұрын
Dude you're very talented. Subscribed.
@elik14917 жыл бұрын
How would you compare the 3Ddoodler start to the 3Ddoodler create?