Making Electric-hydraulic Tipper Trailer

Рет қаралды 1,438,540

Жыл бұрын

I used a 12v hydraulic power supply that comes from a tail lift from a small van, The power supply has a built-in section divider, which makes it easy to install. To control the power supply I used a relay and a 12v winch pilot and receiver, and a 12v 20ah gel battery.
The hydraulic trailer can be attached to any vehicle, mower tractor, quad and car. Dump trailer the maximum weight it lifts is about 400 kg, limited by the strength of the wheels, if not for the wheels, it would be possible to easily transport and unload larger loads
Start supporting this channel and you will get these bonuses:
/ @workshopfromscratch
Tools:
Drill amzn.to/43dE6hO
Angle Grinder amzn.to/4a70xry
Other tools amzn.to/3IAQE9N
Camera:
Drone - amzn.to/4a5TvTP
Camera - LUMIX GH5M2 amzn.to/3UR6Niw
LUMIX G VARIO LENS amzn.to/49IfVdq
Camera - LUMIX G85 4K amzn.to/4a4deTY
GoPro Hero10 amzn.to/3uThjvm

Пікірлер: 348

@Wingnut_Stickman Жыл бұрын

Couple ideas to improve -- Build a hanger on the front face to hold the tailgate when it is not installed. And Install chains on the tailgate so you can limit the opening and control the spreading of product, like a dump truck does, Excellent video! Thank you for sharing!

@jorgeconcheyro Жыл бұрын

Love the "pallet width" feature, very clever. Fantastic construction, I hope it helps a lot!

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@CharlesSibamyoni Ай бұрын

Bro! I'm mesmerized

@justicefall1917 Жыл бұрын

Another awesome build! I never get tired of watching your skills and workmanship! Thank you very much for sharing!!!

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@johnrussell5180 Жыл бұрын

Exceptional fabrication. I see you have bunches of high-end tooling machinery, but you obviously also have the knowledge to operate them. Best work I have seen in a long time!

@paulg1827 Жыл бұрын

I'm a cabinetmaker of 35 years, shop full of tools, but the wrong medium.......enjoyed watching!

@jjock3239 Жыл бұрын

What a superb design, followed by excellent construction technique. I have a trailer, but if I needed to build one, this is what I would use as a model.

@mcmuskie2563 Жыл бұрын

Throughly enjoyed watching you work. Great skills & equipment!

@brentonwilhelm6920 Жыл бұрын

Was absolutely mesmerised from beginning to end. Quality I can only dream of. Hats off to you sir.

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@rgthomson1 9 ай бұрын

I was rebulding a trailer last week and i sure wish i had access to the great workshop and tools you have there, you also have all the gear and great ideas, great workmanship

@crazymtbrider Жыл бұрын

I have to say I quite enjoyed the drive to dump the cuttings while mowing but this makes dumping the cuttings more enjoyable! Please make a shute from the mower to the trailer for grass cuttings

@donaldmatthies6026 Жыл бұрын

That's a really nice handy little trailer. Thank you for taking time to film, build, edit and post this video.

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@donaldmatthies6026 Жыл бұрын

@@WorkshopFromScratch you are welcome

@kameljoe21 Жыл бұрын

Super. I would change one thing and that is when the line comes in at the ram on the top. Put a hard line down to the pivot point this way the line only needs to move a small amount and the flex would be limited. Other than that a super build! Love it.

@donaldstrishock3923 Жыл бұрын

ALL That WORK,and NO SUSPENSION;= PRIMITIVE PERFECTION.

@SimonCoates Жыл бұрын

Excellent workmanship and a very good trailer. But a safety warning: this needs a swivel hitch to prevent the towing vehicle from turning over if the tipper trailer fell over sideways. It's an easy bolt-on upgrade. Also requires a fuse or circuit breaker on the battery connection.

@johncuervo3019 Жыл бұрын

Sounds excessive. Just don't tow or dumb on uneven grouf

@mikel9567 Жыл бұрын

Clearly you don't know what you are talking about. Even commercially built dump trailers don't have a swivel hitch. Why, because it's a weak point. That trailer isn't big enough and doesn't raise high enough to worry about tipping.

@larryenglish9292 Жыл бұрын

lol I'd be shocked if this trailer was capable of turning over a 4 wheeler or golfcart. how big do you think this trailer is? lol

@metalanddust Жыл бұрын

My old man had a tractor tipper go over once at 30’ high. This is sound advice. Possibly not as much of a worry as his

@arcraider937 Жыл бұрын

LOL the design exceeds it's intended use .

@dwyanejetersr6470 9 ай бұрын

Your skill is extraordinary your gifting from the creator of all things, such a pleasure to watch you work, sometimes I watch you for 5 or 6 hours and I'm still amazed at your skill. Keep it up sir, we enjoy watching you work!!!!!!!!!!!!!!!

@ElectricGears Жыл бұрын

That is a very nice design. One thing I would suggest is to cover the pump and battery with a solar panel which will protect them from the weather and keep the battery topped up without having to think about it. You might also be able to find an old tool box to mount them in which could also be a place for the remote control. I'm thinking of those tool boxes which would be deep enough, but then have a removable tray to cover the battery/motor and it could hold other small stuff.

@ur_quainmaster7901 Жыл бұрын

This is a good idea! Every spot on my property that gets a mower, tractor, atv, etc parked in has a solar powered battery tender connection. That and flat tires are such a pain in my ass that I mounted a 12v battery and air compressor to a dolly... Has jumper cables just in case after one of the battery tender wires oxidized and that battery was dead even after being on a damn charger. Also has a shelf for a little 79cc 2 stroke harbor freight 700w generator but I haven't needed that for anything yet. I have grid power available in most spots but why have the constant drain when solar is sufficient.

@HappilyHomicidalHooligan Жыл бұрын

In addition to the above modifications, I suggest adding a second set of tailgate connections to the front of the trailer so when you take the tailgate off the back, you can hang it on the front face of the trailer so you don't lose it, forget it and when you've offloaded whatever you took the gate off for, you can immediately put it back on the rear so you can then load more lose material (gravel, sand etc.) without having to go all they way back to wherever you left the gate...

@tomjack9632 8 ай бұрын

Very nice job, enjoyed watching the build

@cgrobe21 8 ай бұрын

Love the whole build. It's genius!. I would like to know more to where I can find that exact hydraulic pump and cylinder. I can't find it anywhere

@okielicious Жыл бұрын

You sir are a master fabricator!!👍

@Rocket39Smoke14 Жыл бұрын

If my scrap pile was like yours I'd call it a gold mine.

@albertsalas9154 Жыл бұрын

I'm like a kid again with some grown boy toys lol 😆 saving this vid. I'm gonna make one now.

@danatraver2134 Жыл бұрын

Your workmanship is excellent and insightful And your video editing is getting even better.

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@jss3018 10 ай бұрын

A master of fabrication. Beautiful. Thanks.

@danssv8 8 ай бұрын

Too nice , I think the kids will enjoy working while you watch them loading it with spades. I think you could have just lifted it off the hitch and tip it out lol , it's so small , sure the kiddies will enjoy their new toy. Very beautiful but you should make a bigger one for the big boys toys. Sure it's going to come in very handy in the paddock. I would really thinking of upgrading the axles though.

@MCsCreations Жыл бұрын

Fantastic work, dude! 😃 The mechanism is brilliant! Well done!!! Stay safe there with your family! 🖖😊

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@oby-1607 Жыл бұрын

Some outstanding metal work with some great tools to do so. Its always so much better to create something rather than to buy it.

@JuniorSantos-qx5bw Жыл бұрын

Muito bom seus vídeos 👏👏👏👏 parabéns 🇧🇷🇧🇷

@moellc Жыл бұрын

You're such an artist! Please keep making videos

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@ggrepoman Жыл бұрын

Great build and craftsmanship. Now I'm guessing the location of the ram is due to the length of its stroke and a possible need to tip it straight up, but if positioned so that the ram is closer to the front it would allow for heavier loads to be dumped, while simultaneously reducing the power needed to raise and lower the tipper save your battery and pump. But in the end it works and for diy that's all that matters. Thumbs up from me.

@45valk 10 күн бұрын

Nice workshop 👍

@yeagerxp Жыл бұрын

Excellent work, next project turn the lawn mower into a small front end loader🤣 👍👍👍 . Thank you for sharing. Take care of yourself, be safe 🇨🇦

@WorkshopFromScratch Жыл бұрын

Thank you 😁 But with this front loader you gave me a good idea - Thank you 😁

@TheFivepointbro Жыл бұрын

Nice trailer, well done!

@Lone-Wolf87 Жыл бұрын

That will come extremely handy in my garden. Well done. Very nice handy project. 👍👍👍👍👍

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@unkjason 9 ай бұрын

You sir are talented!

@akitas8165 Жыл бұрын

Excellent workmanship and an excellent result. Well done.

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@dav1dsm1th Жыл бұрын

Great video. I hope the fittings on the hydraulic ram don't get knocked off - as they seem to be the lowest part of the lift mechanism - maybe some small skid plates to protect them would protect them. Stay safe out there.

@WorkshopFromScratch Жыл бұрын

Thank you 😁 There is more clearance between the mount and the ground than it looks in the video 😁

@Patriottoo2 Жыл бұрын

Well, that project didn't take very long to build, but I would have painted it green. 😀 Handy little trailer... well done! Appears you have a bit of "scratch" invested in the workshop tools.

@WorkshopFromScratch Жыл бұрын

Thank you 😁 Troktorek mower is red that's why I painted it a similar color 😁 I try to save and buy tools all the time they are not always good quality tools but the most important thing is that they do their job :)

@Patriottoo2 Жыл бұрын

@@WorkshopFromScratch No need to justify the color you chose... I was just joking with you. I'm jealous of your tools. Cheers!

@billybike57 Жыл бұрын

Awesome design & assembly 👍🏼

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@VertigoRC 8 ай бұрын

Nice work. Thanks for sharing. 👍👍👍

@pyro323 Жыл бұрын

Nice build. I'd recommend a charge circuit for the battery otherwise it will just discharge as you use it. Maybe a solar charger or just recharge it after each use.

@WorkshopFromScratch Жыл бұрын

Thank you 😁 First I have to fix the charging in the mower troctor 😂

@madeingarage7040 Жыл бұрын

Super estetycznie Ci to wyszło. Tak trzymaj!

@WorkshopFromScratch Жыл бұрын

Dziękuje 😁

@arturlend2297 Жыл бұрын

Przydatny sprzęt w małym gospodarstwie, dobra robota 😎

@WorkshopFromScratch Жыл бұрын

Dziękuje 😁

@Skiridr22 Жыл бұрын

I’m impressed once again great work 👍🏾👍🏾

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@_Waldezas Жыл бұрын

Love the simplicity you keep in your builds. Hinges need some second thought.

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@jaroslavklima4591 9 ай бұрын

This is just great.... can you write me how much milimeters has that piston woring lenght??? Distance between start and end position??? thanks

@dzonyinglisz1611 Жыл бұрын

Piękna robota jak zawsze.

@WorkshopFromScratch Жыл бұрын

Dziękuje 😁

@BuildALotAcres Жыл бұрын

Looks great. Very nice job! 👍

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@charlesemmer8856 Жыл бұрын

You should install a tailgate release reachable from the drivers seat. Again, very nice construction as always.

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@romihofi8848 Жыл бұрын

Jak zawsze super robota..👍👍👍

@WorkshopFromScratch Жыл бұрын

Dziękuje 😁

@andyb7754 Жыл бұрын

Very nice trailer build, thank you.

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@greggmcclelland8430 Жыл бұрын

Great job. You have made such a beefy wagon. The only thing I would do differently is a better beefier tailgate latch system. The one you have does not match the rest of the wagon for strength. You have mad skills.

@kentuckytrapper780 Жыл бұрын

Outstanding build, excellent job..

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@william38022 4 ай бұрын

Pretty cool 😎👍😊 I wish you were my neighbor👍

@lnesland 5 ай бұрын

Nice build. With all the great tools its no problem making good stuff :-)

@v_garage_u_temi Жыл бұрын

Приветствую ,спасибо за хорошую идею

@AaronEngineering Жыл бұрын

That will come in very handy. Good job 👍

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@RoMiguens Жыл бұрын

That's very cool, one day you'll make a 4x4 small Traktor just for the farming tools ... very nice job 👏

@WorkshopFromScratch Жыл бұрын

Yes, a small tractor is in the plans but I don't know if I will be able to build a 4x4, but maybe 😁 Thank you 😁

@RoMiguens Жыл бұрын

@Workshop From Scratch - tray to use hidráulica traction 2 wheels permanently on traditional gearbox, and 2 wheels with hidráulic traction. More controllable very simple to use and fewer parts and has independent traction and steering on demand. just an idea never seen I think, extreme hybrid 4X4 ... good job my friend

@djevo3441 Жыл бұрын

Excellent job my friend congratulations 👏👏👏👏👏

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@jackjohansson10 3 ай бұрын

Your shop is so cool and never judge a book by its cover I guess

@zacharywong483 Жыл бұрын

Spectacular job!

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@kplandscapinglawncare563 6 ай бұрын

This was amazing to watch you build

@Lordlur Жыл бұрын

I am impressed, want to come down to Poland and buy it :D

@mead6754 Жыл бұрын

I love watching your videos your a very talented man

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@SB-nt9fp Жыл бұрын

Really nice build. You should sell the plans.

@b.malnit8983 9 ай бұрын

Awesome dump cart.

@jimmoravec1326 5 ай бұрын

Excellent craftsmanship 👍

@EmiAgriDiY Жыл бұрын

Great Job 👍👍👍

@droberts73543 Жыл бұрын

Nice work!

@4tra 11 ай бұрын

i don't know why but i rather do it with external power source. make like trailer socket. because charging battery... im to lazy :D over all great job and amazing project... looking for your future builds

@bartomiejmielnik8485 Жыл бұрын

Super robota pełen szacunek 😁😁😁😱 ja za swoją biorę się od 2 lat i wsiąść się nie mogę ha a może masz jakiś projekt na ta która zrobiłeś 😁😁tylko ja jeszcze muszę dorobić zabudowę z drobnej siatki żeby z tylnego wyrzutu kosiarki odrazy trawę łapać 😁

@silvergrizzly316 Жыл бұрын

You just simply amaze me!😃👍👍

@WorkshopFromScratch Жыл бұрын

Thanks 😁

@IrfanAnsari-cl9jc Жыл бұрын

Congratulations sir for new cutting machine 😍😍🔥🔥 love from India ❤️❤️

@richardstrombergoverkill5099 5 ай бұрын

You are an ARTIST!

@Vikingwerk Жыл бұрын

Nicely done.

@Alai84 Жыл бұрын

Świetnie wyszło!

@CharlesSibamyoni Ай бұрын

This guy is a professional Fitter and Turner

@WorkshopFromScratch 13 күн бұрын

No, I'm a self-taught amateur 😁

@DreamerDrafter Жыл бұрын

Spectacular ..mini truck i guess..⚘👍

@cuorpoantonio8015 Жыл бұрын

Maestria unica amico. Da manuale, peccato che per me è irraggiungibile fare quello che hai fatto. Ma come lezione per apprendimento è veramente unica. Grazie

@darekdrozdz4395 11 ай бұрын

Niezła robota, właśnie sam szukam mechanizmu wywrotu do mojej przyczepki. Mógłbyś podpowiedzieć gdzie kupiłeś ten silownik i pompę elektryczno-hydrauliczną???

@erikbraguim4288 Жыл бұрын

Belo projeto gostei parabens

@JAKE3914 Жыл бұрын

Nice job!!

@survivalmarcel 9 ай бұрын

Do you have a link from the hydraulic system? I can not find it unfortunately.

@850alexandr Жыл бұрын

Шикарно!👍

@tobiasandersen1168 Жыл бұрын

Thanks 😂 know i know what Im gonna build My dad want that actually thanks for the idea also 🙌❤️ big fan u have made me do so many stuff

@WorkshopFromScratch Жыл бұрын

Thank you, i glad find my videos useful 😁

@tombarnes1871 5 ай бұрын

Excellent work!!

@diyohan2226 Жыл бұрын

Super travail 👍 une belle application

@WorkshopFromScratch Жыл бұрын

Merci 😁

@guyina4x499 Жыл бұрын

Very nice dumper!

@WorkshopFromScratch Жыл бұрын

Thank you 😁

@piotrmatczak5694 Жыл бұрын

O widzę nowa przecinarka taśmowa 😀👍

@WorkshopFromScratch Жыл бұрын

Tak, zagościła też nowa, ale stare też używam :)

@DanKoning777 Жыл бұрын

*Excellent!* I couldn't give this a "thumbs up" fast enough. Question regarding the sides: is there a specific reason, or advantage for the having angles vs straight sides? Is it to strengthen the box, or does it dump wet material easier without clogging? I also liked the latches you used-they're very similar to those on my trailer. [I think I shared a link with you at one point in the past on a previous build]. Anyway, great job-as always. *God bless.*

@WorkshopFromScratch Жыл бұрын

Thank you 😁 As for the slanted sides, it's mainly about larger capacity, thus not increasing the dimensions and wheelbase in the trailer, if I was making a larger trailer, I would use ordinary straight sides :)

@bobandrews9940 5 ай бұрын

I think the widening sides also act as fenders if making a larger, road worthy version.