***PLEASE NOTE: We do not have copies of these keys keys for sale. We only make them on a case-by-case basis.
@nickbaldwin760 Жыл бұрын
How much would it be to have one made? I just found my grandpas traveling teller safe and want to open it up.
@texnartist Жыл бұрын
How can I buy a key?
@JuanSanchez-dk2rg11 ай бұрын
Hi do you still make these keys?
@robertpattonii10723 жыл бұрын
I am happy to report that I was successful in getting a key cut which opened my Automatic Safe Recording Co, First State Bank of Detroit, No 33000 bank. Used a 1225A blank key to start with. Thanks for the video as it was extremely helpful.
@doughutchison79003 жыл бұрын
Dig It!! I’ve always thought the true test of a locksmith is the ability to make/impression a key just like that. Great job Sir!
@PocketWomen3 жыл бұрын
That was really cool to see. Those are great looking money boxes, we don't get that style here. I see that No Files Were Harmed in the making of this video. Cheers
@odinslockllc Жыл бұрын
I have one of those lock boxes in my collection of weird locks. Never got around to making a key for it though but I’m pretty sure I have some that might fit it in my old used precut flat key collection. You do excellent work. These kinda jobs are fun but because it’s a lot of labor, that alone might cost more than these little boxes are worth. Time is money but you hate to have to charge that much. Thanks for sharing!
@wallers-jackdawlocksmiths90403 жыл бұрын
Beautiful job! My fav part of locksmithing actually smithing 😁
@pondscummagnetfishing Жыл бұрын
I pulled up one of these Travelling Teller banks while magnet fishing on Saturday. Someone had pried open each of the slots, presumably to get any coins, before throwing it in the water. It had obviously been down a long time as it was so heavily encrusted I had no idea what it was until I managed to get some of the gunk off of it at home. It's still locked but seems empty other than some silt I haven't been able to remove yet. Thanks for a very informative, fun video!
@ImGumbyDangit3 жыл бұрын
Hey Jason, Those look like the keys for paper towel dispensers. Fun little video.
@KeylessEntry3 жыл бұрын
That was awesome to watch you make those keys, nice work👌
@BensWorkshop Жыл бұрын
Many thanks for that. Tells me exactly how to do the same thing to a UK version of the same box!
@funkeyfastdrawmonkey14833 жыл бұрын
A cool bit of lock history. Always enjoy watching your rekey vids. Have a good one Jason :)
@kevinkoepke83113 жыл бұрын
Good job! Took me awhile to figure out how the coin slot keepers sprung. Thanks Jason
@garyanvil23543 жыл бұрын
I made a key from a hacksaw blade for my cousin who has the same model bank... I do enjoy watching you impression keys👍
@WiliamBennettwildarbennett3 жыл бұрын
So the "key" to a successful impressioning is #Lockforce Level of patience. Cool video again from u'ns.
@hektik80073 жыл бұрын
That’s an insanely cool lock I have GOT to get one
@jeffmoss263 жыл бұрын
Have not had one of those in the shop in quite a while. They are pretty fun to work on
@danareed16563 жыл бұрын
awesome job! and now they have a functioning bank
@Deadlocks863 жыл бұрын
Mrs Deadlocks has a colection of these coin boxes. Got a Barclays bank one the same as that. Might have a go at makeing a key for it. Thanks for the info👍
@63flight3 жыл бұрын
I love this video, this is old school key making here brother. 👍
@petewoodfine21003 жыл бұрын
Hi Jason. Thanks for taking the time to do this video. Does Kim know that you use the posh smelling candles for impressioning keys? Nicely done too. I thought files can be bi directional, with new cutters on them. Saws only cut in one direction but we don't take them away from the cut then place them back again. Strange that. Thanks again for doing this video. Nice to see the workings of this piece of history.
@dennischausse30753 жыл бұрын
Jason you are a true master you amaze me
@davidcampo66902 жыл бұрын
I have a farmer’s and mechanics bank from Middletown ct. gotta get going on a key
@ROBERTBLOOMFIELD-xx9hx3 ай бұрын
I used a piece off of a paper bull dog clip and was able to open the box easily. Locking it is a different story though.
@robertd1965 Жыл бұрын
I just made a key for my Traveling Teller out of an old reciprocating saw blade using your template. Luckily it didn't need multiple teeth. I will say these things are pretty fickle. It took me 2 tries to get a serviceable key. Also strange that it only opens in one direction.
@kristinm.97292 жыл бұрын
I have been looking for this key for decades. Please - I’d be so happy and grateful if you will make me one too. My bank belonged to my grandmother and it is the only momento I have of her. Hope to hear from you!
@keithherr3 жыл бұрын
Good job my friend!
@willardlocks3 жыл бұрын
Good work!
@MTwoodsrunner3 жыл бұрын
well done !
@pjdambra3 жыл бұрын
Nice job Jason. Time consuming fun. What’s it worth for your time ??
@kathimargeson98492 жыл бұрын
I have one of the Travel teller’s along with a key, but it will not open the teller. What is your solution?
@gkeyman5653 жыл бұрын
I've got some keys that looked like that. The first one is the hardest!
@DannyWoodburn8 ай бұрын
How do I get a key made I have one from Savings Bank of New London
@robertpatton77853 жыл бұрын
What was they key blank number and manufacturer you used to cut the key? I have to make the keys for the two "banks" that I have by the Automatic Recording Safe Co.
@lockmanmd87383 жыл бұрын
Great job!! Just curious, why don't you use the bit key duplicator in the back to copy the bitting onto the other blanks?
@selock3 жыл бұрын
The center cut makes it too easy to break when using the slotter. I discovered that the hard way the first time I did these
@rocksteady7870 Жыл бұрын
I came across you and was going to ask do you make keys I have a kent State Bank. The Home Of Grandrapids, Mich Automatic Recording Safe.🙏🏿
@bsbuchalt2 жыл бұрын
Any place I can get blanks? One half opens,. I think I took too much off the other side
@selock2 жыл бұрын
Any flat steel key that matches the thickness & width
@danareed16563 жыл бұрын
that seemed like a lot of work for keys!
@theswmpoolguy2 жыл бұрын
Sir, I have one of these banks. My local locksmith does not want to get involved in trying to make one for me but he says he will give me the blank and I can attempt it. How much would you charge to make me one of these?
@luddmouse2 жыл бұрын
Me too
@jameshammons23543 жыл бұрын
When you can translate y’all to you all in context, you might be south of I40. Like your video’s
@technosasquatchfilms3 жыл бұрын
are those lever or just warded?
@jesusjuarez9848 Жыл бұрын
I need one of those keys, i have one of those banks n i can't get it open it was given to me by a friend
@jmr3 жыл бұрын
Now he can get duplicates at Walmart. Better stamp DND on them. Lol Jason filing in high speed a around 38 minutes sounds like a jackhammer in the background.
@mattm18173 жыл бұрын
I was quoted $30 to make my Yale key by a local locksmith
@luddmouse2 жыл бұрын
Can I send you my bank to get keyed
@robertschneider95922 жыл бұрын
Ilco 1222AL key blank is one that worked for me.
@selock2 жыл бұрын
Any flat key type blank (many safe deposit style keys) that are wide enough and thin enough to fit can be used!