I use a thermite reaction to produce the heat and metal needed to make something out of iron. Help me make videos by donating here: / codyslab Follow me on Facebook: / codydonreeder SubReddit: / codyslab Twitter: / codyslab
Пікірлер: 2 300
@willaien98496 күн бұрын
Future archaeologists are gonna be so confused by your farm
@nedisawegoyogya6 күн бұрын
Nah they'll know it's Cody
@burlak31826 күн бұрын
do you mean archeologists? :D
@justletmelistthese6 күн бұрын
"They used thermite to cast iron but they were bare footed, never discovering foot wear."
@flow57186 күн бұрын
They be saying a great magus lived here and make it a sanctum or something 😉
@hughmilner70136 күн бұрын
@@burlak3182 both spellings are used, although "archaeologist" tends to be used by Brits... and archaeologists.
@spacebeetle6 күн бұрын
feeding aluminum and iron oxide burritos to a fiery thermite volcano was not on the list of things I thought I would ever see
@harriehausenman86236 күн бұрын
Thermite Burrito! Love it.
@KillianTwew6 күн бұрын
Well wake up, Cody's here
@TobiNightcore6 күн бұрын
It made me imagine an alternative universe where wood doesn't exist and logs of thermite would be used to to fuel fires
@-danR6 күн бұрын
To me, it had a sort of Terminator 2 ending. "I cannot self-tehminate; you must lowah me into da steel..."
@nathank47086 күн бұрын
Same here. But he makes things very interesting😂
@ashworthcustoms5 күн бұрын
Preheat your crucibles to a soft red glow. This’ll help prevent the iron from skinning on top. Also hit it with a small handful of borax before you pour. Cleans the metal.
@AllanSanderson772 күн бұрын
Yep, was also going to suggest some borax.
@kbot10602 күн бұрын
I know next to nothing about metalworking, but I think the aluminum in the mix might also be making the skin problem worse as I've never really heard of an iron-aluminum alloy nor do I think they'd mix well together.
@alexhirt4382Күн бұрын
I think the sand ended up acting like a flux at those high temps, causing the skin problem as it cooled just a hair too quickly. I also suggested borax lol
@chadoftoonsКүн бұрын
Cody used plenty of borax before in normal casting im betting he just didnt have any there and also wanted it to be low tech
@doppledКүн бұрын
@@kbot1060 the skin itself is the aluminium oxide
@Evipicc5 күн бұрын
I work as a mechatronics engineer for a ductile iron company (actually just up north of you) and those folds are called Mold Splash. It is because the casting was not a single smooth motion. That is absolutely still usable!
@MrPruske13 сағат бұрын
It's cool to see structures from manufacturing like this imo, like waves in plastic from the pump pushing in spurts of plastic in an injection mold causing a chatoyancy effect.
@toothlessblue6 күн бұрын
22:25 "Now to tap it off" was the coolest thing I've seen in forever Like something out of a mythical dwarven forge.
@keithjurena93196 күн бұрын
Now you know why it is called tapping the furnace.
@clorky26 күн бұрын
I don't think it was cool, but a rather hot shot.
@harriehausenman86236 күн бұрын
Yeah, that was *WILD*
@Aaron-fh6hd6 күн бұрын
really awesome shot
@y33t236 күн бұрын
Just like in a professional smeltery, and soon much iron was actually made from such crude thermite
@vell0cet5176 күн бұрын
10/10 casting a pan with thermite skills; 2/10 egg frying skills.
@jurjenbos22816 сағат бұрын
You forgot the skills to document the process; that is no small feat.
@ericrosen66265 күн бұрын
One of my favorite "Cody things" is that like nothing seems to go to waste. "I need a funnel" doesn't mean go to the store and buy a funnel, it means cut the top off of a plastic bottle. "I need a vent for my mold..." Well, take the rest of that bottle you made a funnel out of and cut off the bottom. Cracked beaker? So what, it'll still measure out dry stuff fine. Wet stuff? An empty gallon jug is fine! Need something like a pastry bag? Well I'll just go ahead and cut a hole in the corner of a ziplock. I do get nervous seeing him handling a moderately heavy box of hardened sand around his bare feet... but I guess if you are careful enough to play with thermite, you are probably careful enough to not lose a toe :)
@wesleyfilips70524 күн бұрын
when you live out in the sticks you improvise
@Sembazuru2 күн бұрын
When working around crushing hazards w/o any foot coverings, one tends to be hyperfocused where your feet are at all times. Except for that one time where your "ain't never got hurt before" hubris catches up to you...
@LugborGКүн бұрын
My uncle used ziplock bags to ice cakes for years, and I always had the best birthday cakes growing up. Sometimes it's more about the skill than the tools.
@roberthousedorfii174320 сағат бұрын
wait, they SELL funnels in stores??? DAMNIT....
@Vegalith4 күн бұрын
I choose to read the title as a Metal-based wizard trying to use Thermite as an ingredient to cast the spell “metal pan”
@thiamath2 күн бұрын
Not far from reality though
@SpaghettiEnterprises2 күн бұрын
Literally describing the video?
@henriquekrever1606 күн бұрын
It's also really fun to see cody saying "i'm not gonna do it that way because it doesnt work" and proceeds to show a clip of the thing he said doest work, going wrong. Love it! haha
@Grandwigg6 күн бұрын
It's a great way to use the footage of failed attempts without using a lot of time to do so. (And a very Cody way of doing it)
@harriehausenman86236 күн бұрын
That was so cool editing!
@AlbySilly6 күн бұрын
I really like seeing the trial and error, though for a split second I thought the same issue happened the 2nd time around lol
@tarstarkusz6 күн бұрын
I wonder if the pan would be usable even if it had turned out well. I think the magnetite has impurities in it.
@MrTStat6 күн бұрын
This has always been one of the best thing about his channel, show where mistakes were made
@thecuriouspan5 күн бұрын
Cody is the mad scientist of our generation. Nonchalantly tapping a thermite volcano to pour molten iron into a mold made of old bee boxes is the most Cody thing I’ve seen. Well played sir.
@McCarthy_Was_Right5 күн бұрын
if reddit was a person 🙄😒
@GerinoMorn5 күн бұрын
The only more Cody thing would be if the boxes were still full of bees or sth xDDD
@rayyankhan47375 күн бұрын
i mean the molten iron was flying out and one drop of that thing gets in your shoe, it catches fire.
@ryangross54464 күн бұрын
bro the way he smacked the pipe in and the whole thing just roared molten iron out like a dragon, seriously a cool process
@techman88174 күн бұрын
That was a dedicated pour.
@mozzyquodo55325 күн бұрын
Easily one of the most entertaining and educational channels on youtube. Love everything you do.
@alexmachan32554 күн бұрын
I love you explaining why you are not doing something and then cutting to where you learned that lesson. Really nice to see the failures as well as the successes since they give so much to learn from.
@HighOnTacos6 күн бұрын
For future attempts - Prior to the early 20th century, cast iron pans were bottom gated, meaning the iron was poured through a flue leading to the bottom of the pan, with the pan upside down and horizontal in the mold. Older pans will have a visible gate mark, as they didn't have the ability to machine it smooth. Eventually they became side gated, and the iron was poured in through a gate at the top of one of the side walls. Modern pans will still have rough machining marks around the side walls where the gate was ground away. You'd probably have better luck with the bottom gate. The cooking surface of the pan would be formed first, with the iron then flowing down to fill the walls and handle. As it backfills the thickness of the pan is built up. At least by my basic understanding of casting.
@brendandor5 күн бұрын
They did have the ability to smooth it, they had files and grinding stones etc, just wasn't a priority or necessary.
@nautica87456 күн бұрын
Those are some MONSTEROUS crickets at 2:22
@rasmis6 күн бұрын
I've paused at 17:00, to share my appreciation of the sound of the fleeing cricket. I don't know if it was added in production, or if it was wearing a mike, but it was just perfect.
@Johannrothschild6 күн бұрын
in my village we have big crickets in rainy season so i was like how big they can we but man these guys are huge
@PurpleHaze2k96 күн бұрын
Dude yeah they are huge what in the hell. Where im from the brown ones are tiny and the black ones are slight larger. Dime or nickel size is just about the limit in my location.
@franksprecisionguesswork5016 күн бұрын
Also known as chicken treats!
@rubiconnn6 күн бұрын
Those are Mormon Crickets. They swarm nevada/utah by the billions in the early summer. They have to get snow plows out to clear the roads because it gets so slippery from the mashed up crickets.
@MrDemi12335 күн бұрын
Cast the iron pan upside down so the thinner walls get filled first. Cast the pan in one go directly from the volcano. Good video as always
@jaratt855 күн бұрын
When collecting the metal from a thermite reaction you need to start the reaction from the bottom.. Mythbusters showed this in one of their thermite episodes and it's also how thermite welding of rail steel (railroad) works. If you start it from the top most of the metal is lost to the reaction and burnt up instead of being usable. Something to help the metal flow in the mold is to preheat it. You need to season cast iron pans before you cook with them.
@iankrasnow53833 күн бұрын
You don't NEED to season cast iron before cooking the first time, it's just a really helpful thing to do. It'll work just fine unseasoned, similar to carbon steel. Food will just stick more and the pan will rust pretty fast. I suppose you might also get a higher iron content from your food.
@ralanham762 күн бұрын
@@iankrasnow5383yeppers The pan has a crack and leaks 😁 Seasoning isn't important yet.
@gizanked6 күн бұрын
17:00 good thing you did a bug check before hitting run.
@pvc9886 күн бұрын
Debugging is always important.
@DH-xw6jp6 күн бұрын
Cast crickets for the knick knack shelf.
@Dracul6166 күн бұрын
@@pvc988best youtube comment I've seen today 😂😂😂😂😂😂😂
@MunifTheGreat5 күн бұрын
@@pvc988 Lol I'm dead.
@youmukonpaku31685 күн бұрын
bug very nearly became a feature.
@Linkehand6 күн бұрын
that pour was so messy and chaotic, i love it
@tannerbuschman16 күн бұрын
youtube has taught me that until your a pro the pour is always chaotic and everything goes wrong no matter how much you prepare. haha
@MacroAggressor4 күн бұрын
This is just fascinating. It's interesting to think of aluminum less as a metal, per se, but more as a storage medium of chemical potential energy.
@pixeldragon63874 күн бұрын
NileRed: “Always wear proper PPE at all times” Cody: “where are my shoes? Eh screw it”
@srdjanradisa6 күн бұрын
25:54 Cody: What you think? Should I dump some water in this ? Me: I thought you'd never ask !!! 😂
@Brkprsn6 күн бұрын
Came to see if someone wrote this because I was thinking the exact same thing hahaha
@harriehausenman86236 күн бұрын
ditto
@TheBreadbocks6 күн бұрын
For your next attempt, you should probably try to have the volcano drain directly into a channel that feeds the mold, rather than filling up crucibles and then needing to dump the crucibles, the extra transfer step is just giving that crust time to form and obstruct the casting
@edymarin77816 күн бұрын
I wanted to suggested something similar. Maybe the same way pig iron is casted into ingots (piglets), but with a shorter channel, to avoid freezing the metal innthe channel.
@gnusamgnu6 күн бұрын
I refrained myself from suggesting this, tyinking there was probably a good reason hé chose to use crucibles. Maybe it has something to do with the slag ?
@edymarin77816 күн бұрын
@@gnusamgnu the slag definetly poses a problem for using channels, but I think that a deep channel would allow the more dense iron to flow on the bottom, while the slag solidifies on top. Of course, the channels would beed to be as short as possible, and Cody would have to babysit it and remove any slag blockages.
@FullSpeed_only6 күн бұрын
@@gnusamgnuThere are Casting Filters made of SiliconCarbide. Might help enough.
@harriehausenman86236 күн бұрын
I also commented that. A direct pour could help. but isn't trivial to implement.
@simonbecker7485 күн бұрын
What a project! Making everything from scratch, the failed mold attempts, actually getting it to work on the first try, the tapping… So much work and such a good result. Awesome video cody
@MJR_ATX5 күн бұрын
Why didn’t you set it up to tap the flow right into the mould
@theCodyReeder5 күн бұрын
Because the iron comes out mixed with slag, mostly melted sand, that would end up in the mould. I wanted to give it a clean place to "rest" so the slag could separate.
@pufthemajicdragon5 күн бұрын
@@theCodyReeder I was wondering the same thing! Thanks for answering! I do think you'll get a better pour if you can pre-heat the mold and flow the iron directly into the mold from your volcano, just because the crucibles create too much of a slag cap problem. Maybe design the outside of the mold with a "settlement" pool? A place built-in to the mold's exterior that allows the slag to float out. This would both pre-heat the mold and feed it clean iron directly from the volcano, no crucibles needed.
@Dreuh20014 күн бұрын
Awesome 😮
@timothywhieldon19714 күн бұрын
@@theCodyReeder Maybe if you could use a ceramic filter and a primary area for it to flow first?
@timothywhieldon19714 күн бұрын
@@theCodyReeder Railroad do this directly into the mould and get a perfect connection. for a 1st attempt you did amazing. your 2nd go should be perfect. I would do a lost wax though.
@Maithiss6 күн бұрын
Though failed attempts are frustrating, showing them and explaining how you learned from them is arguably the most important part of this entire project. Also, an entire set of kitchenware made of the sand (the iron in the sand technically) around the area sounds amazing.
@Blandge6 күн бұрын
For those who aren't on Patreon, Cody has been working on this one for a loooooong time on and off, refining his process.
@geak786 күн бұрын
@Blandge I wish I had the funds to support. Because those are exactly the videos I miss. And all the ones he had to take down...
@Blandge6 күн бұрын
@@geak78 It's not as important anymore since Cody finally got his YT payments figured out. He does post a ton of extra content there though
@josephdorey84585 күн бұрын
@@geak78 why did he have to take some down?
@geak785 күн бұрын
@josephdorey8458 he was getting hit with strikes on a lot of videos that even hinted at explosives despite other larger channels basically teaching how to make them. He took a bunch down just to prevent losing the channel. Others probably have better details on the fiasco.
@JPBennett6 күн бұрын
I think pre-heating the mold before the pour may have helped the iron flow a bit better. But a great success, especially doing it single-handed.
@DerHenker_6 күн бұрын
that won't work here because of the melting point of iron. Its over 1500°C (don't ask what it is in freedom units) and the temp in the melt is even higher, around 1700 - 1800°C. So to have any effect the mold would have to at least 800°C. In that heat the mold would simply collaps. The best solution would be to use finer alu and iron oxide in the correct ratio, maybe a bit more iron oxide than needed to reduce the alu content in the final product to make it less brittle as aluminium makes iron very brittle
@FishyBoi13376 күн бұрын
@@DerHenker_ What would that be in freedom units, by chance?
@cowpatty_86036 күн бұрын
Pretty sure he has two hands
@drusna5 күн бұрын
@@FishyBoi1337 5 times hotter than a well-done steak, or 6 times hotter than a football field on July 4th
@joybreegaming87815 күн бұрын
@@drusnaactually it’s 17 times hotter than a well done steak.
@ngz11233 күн бұрын
That was genuinely one of the craziest things I’ve ever seen. It got so very sketchy so quickly and you still stayed level headed with a thermite volcano erupting beside you and molten iron spitting up at you as you try to fill your little crucible. Insane
@davidwarner90323 күн бұрын
The "I guess I'm having scrambled eggs" makes the 30 minutes of complex chemistry prior almost relatable
@DH-xw6jp6 күн бұрын
Using thermite to cast a pan? Wicked Cool. Using an unseasoned iron pan to fry an egg? You monster.
@LordDragox4126 күн бұрын
The pan was a seasoned veteran, it went through literal hellfire to be able to fry that egg!
@hugegamer59885 күн бұрын
@@LordDragox412 when you quench with oil not only will it cool, it forms a natural non stick coating too!
@LordDragox4125 күн бұрын
@@hugegamer5988 It causes polymerization of the oils/fats, and with enough layers it could even plug up the hole in the pan. But that's besides the point of my comment, which was meant to be a joke.
@barthanes15 күн бұрын
I was a bit shocked as well that he would cook in an unseasoned pan.
@AaronC.5 күн бұрын
@@hugegamer5988 That's so cool! I imagine it should be a vegetable oil, not a machine oil, as normally used in blacksmithing?
@XxShOeEaTeRxX5 күн бұрын
I love how you come up with this shit and actually do it even though its a logistical nightmare
@xTreme.Power.3 күн бұрын
Cody: The single guy on KZfaq who have 2million subscriber's but still record like a young KZfaqr, without any setup or other 😂 Only the resolution is higher since some videos 🤣
@Knight_Astolfo3 күн бұрын
Slamming the pipe in with the crucible was one of the most metal things I've ever seen.
@MyManwich26 күн бұрын
This is probably the closest I’ll ever get to knowing a dwarven blacksmith.
@shoberino38986 күн бұрын
He is just casually hanging around 4,500°F metal droplets flying everywhere 💀
@mindofmadness55936 күн бұрын
I've seen people doing Aulminum and such wearing fliflops. Life aktering event if something goes sideways.
@harriehausenman86236 күн бұрын
… so we don't have to 😆
@andersjjensen5 күн бұрын
Cody does Cody things that only Cody can survive. Welcome to Cody's lab.
@dylanmeier75564 күн бұрын
I work in an iron foundry. You'd be amazed how relatively safe molten iron is.
@olam46423 күн бұрын
I've been watching your videos for years and that sequence at 22:30 was one of the coolest things ive ever seen, the molten steel shooting out violently at 2000ºC and then the way you have to fight to wrangle it into the mold, that was amazing!
@MBUncle3 күн бұрын
Guys can you get a log for tonight's bonfire? Cody: I've got you man, I have the perfect one.
@BHSAHFAD5 күн бұрын
one thing i love about cody is he never cuts his video short, i love it that he goes through and investigates what happened and shows us his investigation too.
@supergeek14182 күн бұрын
Science at its finest and most basic, all at the same!
@malljip34206 күн бұрын
40 minutes of codyslab, fuck yeah
@davidf22816 күн бұрын
Seemed more like ten. Best. Content. Ever.
@Kawka11226 күн бұрын
Cody slab
@harriehausenman86236 күн бұрын
Hope this will become a series: Thermite Casting with Cody! And we cast some really silly stuff everytime 😄 Maybe just going wild and creating some artsy stuff. I would buy one 😉
@reggiep756 күн бұрын
Just under 20 for me.. 2x speed watcher 😉
@Kawka11225 күн бұрын
@@aufoslab BIG MEMBER 12CM
@alexhirt4382Күн бұрын
Most people don't understand how high stress the actual pour is. I noticed you kind of stop after you picked up the first crucible and look at the fountain of molten metal. That was my first pour too lmao but it was gold, not aluminum. Overall you did a pretty good job. Next time don't use crucibles, go direct into the mold. It will prevent a lot of hardening and cooling. Also, try using a flux of some kind. Idk what flux is used for cast iron, but when casting gold or silver I like to use borax. It protects against buildup and helps the metal flow evenly. I think the sand in the bottom acted as a flux but also caused those caps on the crucibles when It cooled just a little too quickly. Overall, well done! I can't emphasize enough how high stress the situation is and how quickly you have to act. Handled it very well sir.
@Sky-._2 күн бұрын
That was great! It's both the most successful thermite casting I've seen AND the most successful I've seen a KZfaqr be at making a cast iron pan. Great work!
@RichardCook6 күн бұрын
i worked in a foundry when i was young the finale step they would do with a mold is use a supper fine silica powder and make a surly with it thick like paint then spray it on the mold lightly dont want drips prob 3 or 4 times use a torch to bake the coating on each lair tell smooth this creates a glass like lair between the coarse sand and molten metal
@bluedistortions3 күн бұрын
That sounds really cool
@Jeremy_Adams6 күн бұрын
When I was a kid I watched Mr. Wizard. Now as an adult I watch Cody’s Lab!
@supergeek14182 күн бұрын
Totally agree.
@ccasling43 күн бұрын
I was so happy when you dumped the water. It looked and sounded amazing! I can only imagine what it felt like standing next to it. Thank you for this really exciting video!
@TextileGeorge2 күн бұрын
This was one of my favorite vids you've done in a year or more, looking forward to seeing the next attempt!
@gizanked6 күн бұрын
These are the fireworks I was hoping for today.
@WormholeJim6 күн бұрын
This is an amazing video. So typical of a typical Cody's Lab video, yet also, I don't know. Oddly accomplished somehow. I've been watching for years on and off, but with this one I realized just how much I enjoy watching these, and also _why_ I enjoy it. It's relaxation pure and simple, sitting back and emerging myself in this feelgood, slightly nutty chemical engineer univers and knowing that there is this guy out there on a badlands hillside doing backyard science like none of all that other stupid shit going on even existed. You help keeping the world just a little sane and playful, Cody. Also, yeah. Of course the wind is going to blow the smoke your way, that's a natural law. It doesn't help move around because then the wind just shifts, so. But at least it spewed the lava in the other direction, so there's that👍
@Blandge6 күн бұрын
Yes, Cody is the sane one 😅
@jeraimie4 күн бұрын
Thanks for making great videos for so long! Always been so fun to watch
@RaExpIn4 күн бұрын
I think, that from all of Codys projects, this has to be at least in the top 10. This was awesome, unbelievably dangerous and interesting. The thermite volcano and filling up the crucible was already insane, but trying to fill up the mold and getting such a result in the first try. Awesome!
@tomarnd87246 күн бұрын
This is the most low tech/high tech thing with how aluminium requires huge industrial infrastructure to make and yet mixing it with sand and setting fire to it is so simple, I love it
@deltab97686 күн бұрын
Yeah aluminum is pretty much a high tech miracle fuel. Once the oxide layer comes off, it gets super reactive. There was a research team that made a surprisingly strong rocket fuel from aluminum and ice.
@arthurmoore94883 күн бұрын
That was my thought as well. The volcano reminded me of a Primitive Technology video. Yet, it's only possible because the energy "put into" the Aluminum. Which was probably shipped around the world so it could be done "cheaply."
@iankrasnow53833 күн бұрын
It makes me wonder if there were any thermite- type processes that would have been possible with primitive technology. We couldn't use aluminum metal or really most pure elements, so I can't think of anything off the top of my head to use as a good reducing agent.
@tomarnd87242 күн бұрын
@@iankrasnow5383 elemental copper occurs naturally, maybe you can get a thermite compound to work with that? Might not be reactive enough
@iankrasnow53832 күн бұрын
@@tomarnd8724 Copper is lower in the reactivity series than iron, so if anything, pure iron would be a reducing agent in a reaction like that, to produce copper, not the other way around. The potential energy and kinetics are also a lot lower so I doubt you could even get a sustained reaction. My hunch is that thermite wouldn't have been possible to make before we started using electrolysis in isolating metals.
@MinedMaker6 күн бұрын
I'm equal parts amazed and stressed out by that pour and molten metal spray, awesome video.
@maxhill70654 күн бұрын
"Time for a second log" while working with thermite is an amazingly out of place phrase haha
@maxwell_edison3 күн бұрын
"I know it got hot in this area.. because the sand is... there." Very nice
@Tharicnar6 күн бұрын
That pan came out a lot better than I was expecting. Not the most efficient method, but certainly a lot more interesting to watch. Thank you, Cody. Keep up the great work.
@ArthurEKing84726 күн бұрын
Best suggestion to improve? The crucibles are an unneeded step. In essence, the biggest "issue" with the casting, was the fact that the metal started to cool in various places and locations, and you didn't have enough of it all at once to fill the mold, so it started to harden in various locations first. So if instead, you just put the mold in the right location? You could have the whole mold filled immediately, and it would be a clearer, simpler process, with fewer steps, and fewer possible points of failure.
@anandrew66415 күн бұрын
This
@mr.narwhal5475 күн бұрын
wouldn't the slag layer still be an issue in this, our would you just need to have a large enough vent for it to bubble up to?
@ArthurEKing84725 күн бұрын
@@mr.narwhal547 slag COULD be an issue, yes, but If you took that into account in the first place? Plan for it? You'd still get a WAY better end-result. IMO
@jannepeltonen20365 күн бұрын
Seeing as how violent the eruption of melted material from the volcano was, getting the material in the mold in a controlled way without using the crucibles as an intermediate step looks like it would be really hard.
@Zach4765 күн бұрын
@@jannepeltonen2036 you just use walls to funnel it.
@chadlimestall92013 күн бұрын
Thanks for doing such a great job at thoroughly documenting your experiments! Fun to watch and I get to learn from your work.
@curtisjordan9210Күн бұрын
That worked out surprisingly well. Keep up the hard work and God bless!
@tom-6076 күн бұрын
It always brightens my day seeing Cody upload. Thanks man!
@erinmac47506 күн бұрын
Absolutely agree!
@harriehausenman86236 күн бұрын
Yeah, thanks Cody! 🤗
@ECM3986 күн бұрын
getting the metal out of the vulcano seems to have worked a whole lot better than i would have thought, i was very skeptical before seeing it flow out so nicely
@CroissantCreatesКүн бұрын
So kickass Cody, love your stuff! My favorite video in a while
@amaos39954 күн бұрын
Awesome video Cody!!! Hope you are doing well this summer and staying cool.
@Talmiior6 күн бұрын
"Wood? pff who ya think I am? A woodsman? We do metal logs out here" xD
@harriehausenman86236 күн бұрын
*Thermite Burritos* as we call them in the badlands 😄
@onmyworkbench70006 күн бұрын
The way Cody list all of the steps that he had to do to cast his Cast an Iron Pan using thermite, reminded me of the old *_British TV series Connections,_* that was created, written, and presented by British science historian *_James Burke._* To remove the sand you need a *_SANDBLASTER!!!_*
@The_Keeper4 күн бұрын
That worked far better than I expected.
@Mr6Sinner5 күн бұрын
2:30 I was so hoping that you would have said “huh, what _pan_ we make?”
@hngldr5 күн бұрын
22:28 - I never thought I would know what such a noise would sound like - that put a huge smile on my face
@Grandwigg6 күн бұрын
The timing of this video is hilarious. I was watching a bunch of old thermite welding videos this last week. Railway stuff, mostly.
@tx5brent3 күн бұрын
That is absolutely amazing how well everything worked, form the way those rolls reacted to the funnel setup, amazing work Cody.
@OmbreFelonne5 күн бұрын
it's as been i dunno how many i follow your channel, it cheers me up seing little cody growing and still doing his things ! enjoy your life my friend keep it up
@matt0xx766 күн бұрын
Ones of lifes pleasures, when a vid from cody pops up
@whynotdean89666 күн бұрын
It went shockingly well, let alone for a first attempt!
@iambecomejeff29035 күн бұрын
This was a really great video Cody!
@Blayzn185 күн бұрын
That's a lot of work! Awesome video Cody. Cool keepsake too!
@user-uc4th2yi3f6 күн бұрын
Cody is my favorite KZfaqr of all time🙌been watching since 8th grade and just graduated college
@henriquekrever1606 күн бұрын
I'm so happy to see Cody with that big smile, excelent video as always cody!
@TrollfaceCowFTW5 күн бұрын
man, this upload made my day. very entertaining as always Cody. thank you
@aceman111004 күн бұрын
Classic cody video and yet still constantly outdoing yourself, love it man!
@GameDesignerJDG6 күн бұрын
I think there's only a few things you can do to improve the process, and probably only marginal improvements: 1. More vents. The wrinkles and bubbles are definitely from trapped gas. 2. More dry. Steam is probably the main source of any surface pocketing (which you didn't have all that much of.) Ideally, you'd bake the mold in a large metal box to keep combustion from adding steam to the mix. Probably ideal to bake it for 8+ hours in a mold that big. I know Nevada and Utah are dry, but not as dry as we'd want, ideally. Mars would be dry enough. 3. More hot. The mold would, ideally, be hot when you pour, but that's pretty hard to do. It would help the metal flow. 4. Thicker walls on the form. You coated that pan really thick in wax, which is great, but more hole to fill means more flow to fill it. 5. If you can, try to place the mold directly under the furnace output pipe to prevent wasting heat and making that top crust on the crucibles when pouring it manually. 6. Make that furnace output pipe thicker or actively cool it with water to prevent it melting and use a bigger inner diameter to prevent it plugging up. Convert to an open channel if you want to restrict flow rate further down the line.
@SerumCRM1146 күн бұрын
7. More flux. I just watched the exotic thermite series of a KZfaq channel named "The Gayest Person On KZfaq". He uses a 50:50 mix of calcium fluoride and cryolite as flux to remove impurities and increase crystal size.
@markussmith31355 күн бұрын
Bubbles come back in the the casting as voids and pits makes the metal like a aero bar there usually concealed inside or look like bubbles them folds look like cold shuts caused by the iron not been hot enough and flashing off slightly in the mould that’s why the water pisses though it’s not sealed together it’s basically where both sides of the pour have met
@GigsVT5 күн бұрын
The crust is glassy silicate slag though. If he goes straight into the mold he's likely to get glassy inclusions
@markussmith31355 күн бұрын
@@GigsVT I doubt it the gravity of the metal and the viscosity will stop that although sand inclusions are common in castings it’s usually down to breakdown of the mould when the boxes are together so it’s gets picked up as the metal flows the crust on the outside is crusty because the heat has managed to melt the sand it won’t happen instantly
@vahannema6 күн бұрын
the only thing i'd suggest is to try and skip the crucibles. after tapping into the molten iron, have it flow into a (tile/ceramic?) funnel, directly into your cast. if it'd cool down too fast in the open air, you could extend the cast to include a hollow section leading to the mould. you would tap it with a pipe like you did here, but the pipe is blocked at the end (away from the molten iron), and has a quarter segment cut out that the metal can then flow through, into the hollow below towards the mould.
@alecjahn4 күн бұрын
That was genuinely fantastic. Nice result, too!
@HardDiskSpeaker5 күн бұрын
Awesome project, good job Cody!👏👏👏
@youngbloodbear96626 күн бұрын
Awesome Cody! This is the kind of video that really excites me as a long time fan
@Jimsimi6 күн бұрын
What an awesome video as always, that whole scene from tapping it off to pouring was really impressive to watch, from your speed getting things into place, and the on the fly problem solving with the crust, all while having heat radiating into your face. Super impressive. Thanks Cody, made my day!
@viktoreisfeld9470Күн бұрын
Thanks for doing these videos! I learn so much from them!
@littlewolfblue13895 күн бұрын
That was awesome! So much more successful than I'd expected!
@dijpdepijp21546 күн бұрын
WHEW that was intense! Amazing result! congrats :D
@gmesomo6 күн бұрын
Maybe next time you should tap the molten iron directly into the mold? Then you wouldn't have to worry about the crucibles and moving the molten iron to the mold. Basically saving a step in the process
@davidmcgill10006 күн бұрын
Might be difficult to directly link them together, but I could see a channel directing it toward the mold working.
@EliteElDios5 күн бұрын
keep it up man, love to see the videos
@brutallion10825 күн бұрын
Yo man i been watching you for years so many of my favorites were deleted but learned so much about chemistry refining mining keep it up man
@MordecaiV6 күн бұрын
A bigger crucible for a single pour will likely help, and I think if you put your flasks at a ~10 degree angle you may avoid the wrinkle/void in the center of the pan base. I think that knit line/void was mainly a failure of venting.
@noahh44316 күн бұрын
Love the thermite videos.
@jonipp13 күн бұрын
one of the better videos imo. energic reactions with tiny bit of panic make the most interesting videos i feel. great job
@constantine333B4 күн бұрын
This is one of your most impressive projects yet! Great job, Cody
@bettathnu3166 күн бұрын
definitely the most badass way i've seen someone make a pan, i swear this dude could make watching paint dry entertaining
@benjurqunov4 күн бұрын
How is it possible casting obstructs special họmọṣẹxuaI special rights ?
@AtlasReburdened6 күн бұрын
I think that if you're confident that your largest crucible has the volume to fill the mold, use only that one to collect at the tap. Let it overflow so that the metal sinking to the bottom displaces as much of the crust forming slag that capped both the crucibles this time around. Best case scenario is that the molten iron displaces virtually all the slag and you loose a bit of unneeded iron to overflow. Worst case scenario is that you have all your usable metal in one crucible, and you only have to break one crust and do one pour.
@krzysztofsoja53013 күн бұрын
Wooow! That was amazing, result came really good. Thanks for sharing and congratulations!
@gizelle-s4 күн бұрын
This is awesome Cody, I love it!
@matthewf19796 күн бұрын
Excellent first attempt!
@1337Gareth6 күн бұрын
That was an awesome watch! Id love to see more of this refined!
@G_man_5 күн бұрын
That's some spectacular work, simply amazing!
@articjackal5 күн бұрын
Cody! I have been watching your channel for years. I always like your projects and continue looking forward to your next project. Thank you for what you do.