wow! I wasn't expecting for that milk texture, congrats. It looks like a professional made coffee
@2wentygrammescoffee1343 жыл бұрын
I have found a method that 100% works on making a good foam of milk with using a timer :) kzfaq.info/get/bejne/bLd7ZNaL1Z-aoo0.html
@PhoenixGower6 жыл бұрын
This is a very helpful video thanks! Just recently got mu coffee maker!
@tan58bs8 жыл бұрын
i love espresso latte ,i love illy coffe ,i love delonghi too...nice shot buddy .
@theeternaldame65124 жыл бұрын
I got this machine, people i know with expensive machines can not believe how the coffee comes out. Just as good as their you beaut machine. Very happy with this machine. Will probably buy the exact same one if breaks down . Has not yet, been 6 years. Xo
@whirled_peas9 жыл бұрын
Hah! Hadn't thought to remove the panarello wand, that thing froths the shit out of your milk.
@Zumaray9 жыл бұрын
Is it just me, or do the frothing wands on the Delonghi suck?
@therealnoodles76386 жыл бұрын
its plastic, wonder if its BPA free
@rinarengganis69694 жыл бұрын
Me too !!!!!!
@2wentygrammescoffee1343 жыл бұрын
I have found a method that 100% works on making a good foam of milk with using a timer :) kzfaq.info/get/bejne/bLd7ZNaL1Z-aoo0.html
@shaun41099 жыл бұрын
hi! nice video and great latte art! i have the same machine too but i just cant get the milk right... could u please do a video or teach me how u froth the milk? thanks!
@ytechsolutionfilingsystem39718 жыл бұрын
Hi, thank you for the video. May i know how fine do you grind your beans?
@lukemification10 жыл бұрын
Thanks for the video - with the pressurized portafilter with this machine, did you tamp the espresso at all?
@macrossover710 жыл бұрын
Yes, watch my another more lengthy video here: The making of Lonely Latte (獨孤拿鐵) from Delonghi ECO 310
@coconutnick9 жыл бұрын
hey, i just got a delonghi coffee machine and i've tried for close to 3 weeks but i just couldn't get the right texture of the milk froth. It'd be wonderful if you can do a video on how you froth the milk using your machine.
@ami77332 жыл бұрын
I have been holding the machine for 3 years . I have never been able to get a thick foam that I can get from an external frother for example "aeroccino nespresso "or "lavazza modo mio milk easy" The foam always comes out thin to me and it clearly affects the taste of the cappuccino so it's like zero. I take out the steam before and acted just like here. I use a pouring jug like here and pour it slowly like here . The espresso comes out well but the whipping actually just doesn’t work. Could it be that the frother of this machine is defective? How does it work for you
@macrossover72 жыл бұрын
Use milk for more fat (not skim milk), use really cold milk so it can last for a longer forth. Also release the steam for a while first before actual forth so that the machine is in boiling state when u start forthing.
@Nada-Amer4 жыл бұрын
Very helpful .. thanks !
@DesChew4 жыл бұрын
I see that you have remove a outer nozzle. I tried that before. It makes the milk less foamy but it’s difficult to make latte art as it’s too weak or shallow.
@2wentygrammescoffee1343 жыл бұрын
I have found a method that 100% works on making a good foam of milk with using a timer :) kzfaq.info/get/bejne/bLd7ZNaL1Z-aoo0.html
@attorneyonwheels7 жыл бұрын
Norah Jones made the video much better
@wang39479 жыл бұрын
Hi, by removing the lock of the original wand, the inner part of the wand would fly off if i turn on the steam to full power. what did u do to keep it on? thx
@macrossover79 жыл бұрын
W Ang Hi, mine will not. Just pull it back tight once in a while.
@outcastatsabre7 жыл бұрын
Hey. I know your comment is 2 years old lol. But i solved this problem simply by tying the wand with a long thin thread.
@AutoKalashnikov7 жыл бұрын
I just cut bits off steam wand off so I can properly stretch the milk. Just remove the outer shroud of the frother and cut the long end off up to the 'line'. After that, just place and lock it back in.
i had also removed the panarello wand/locking nozzle, but does anyone know how to prevent the pointy wand remaining (like in video) from shooting out when it heats cold milk? have experienced it shooting off in all directions when frothing :/
@macrossover73 жыл бұрын
I just push it up once it a while to make sure it is tight.
@DesChew9 жыл бұрын
I own the same machine like yours. Can I know how long do you extract the coffee? When do you know it's time to stop?
@filipkurdziel98944 жыл бұрын
The button that you press to extract the coffee there is a light next to it stop frothing when it's fladhing
@juanbernalesbozo4366 Жыл бұрын
What!! But how is it possible that the spout doesn't blow away??
@macrossover7 Жыл бұрын
I don't know. I just push it as hard as possible so that it won't blow away most of them (it did some times :p )
@Gigi0869 жыл бұрын
Hi Allen, with the wand, my milk foams up a lot. By removing the original wand, my milk became watery. Do you face the same issue?
@macrossover79 жыл бұрын
No. U have to pull down your cup gradually to create foam.
@exhaustedua8 жыл бұрын
Do you you start by putting steamer to the bottom or top of the milk? My milk get hot around 5-10 sec, but you hold it around 70 secs. Such a big difference in steamer beteween 310 and 311?
@macrossover78 жыл бұрын
top. i put the milk in freezer for a few minutes first
@AutoKalashnikov7 жыл бұрын
Ah yes. This problem is cause by water build-up in the machine. Purge your steam plenty until the steam comes out dry and use it when only the green light is on. Your milk became watery because all that water were injected into it. I own the same machine and yeah it happens.
@mathiass.tecmed89434 жыл бұрын
I have the same Delonghi icona, but every time I take off the cappuchino accesory for better crema the little black accesory goes off violently because of the air pressure, do you guys have any idea to keep this thing in place?? Help me please I want to know how this guy do it 🙏🙏
@macrossover74 жыл бұрын
you just have to push it tight every once in a while to make sure it is tightly sticked. My practice is to use a little bit of force to push it up after every usage when I clean it.
@mathiass.tecmed89434 жыл бұрын
@@macrossover7 Thanks! I will try
@Jason-kg1xp2 жыл бұрын
how you get such decent crema in your machine. Mind comes out always under extracted
@macrossover72 жыл бұрын
Just plug it hard enough. And after hundreds of trial and error. 😅
@jollybeanhead2 жыл бұрын
@@macrossover7 how many grams would you say?
@binglim19404 жыл бұрын
Is eco v311 with duo temperature?
@macrossover74 жыл бұрын
I guess not. Not for v310.
@binglim19404 жыл бұрын
@@macrossover7 thanks. I'm looking for an duo temperature espresso machine. U got any suggestions?
@macrossover710 жыл бұрын
No, I didn't depressurized the basket.
@macrossover78 жыл бұрын
try removing the original wand like what I did in the video
@macrossover78 жыл бұрын
iit sometimes happen to me too. need to tighten it once in a while
@lawless13179 жыл бұрын
Hi, I notice that you seem to have replaced the standard steam wand from Delonghi when a different wand. Can you tell me what wand is that?
@macrossover79 жыл бұрын
Hi, I just remove the part locking the original steam wand
@DesChew9 жыл бұрын
Allen Cheuk Why did you remove that?
@AustinArrowsmith7 жыл бұрын
I found it was easier to get better control of the quality of the steam wand without the locking nozzle too. Finer bubbles *right* below the surface, giving a thicker, creamier solution. With the nozzle in place, it produced very large bubbles which burst shortly after pouring, giving a deflated cappuccino.
@POS369 жыл бұрын
How much milk did you use ?
@macrossover79 жыл бұрын
About a quarter of the tank.
@POS369 жыл бұрын
150 to 200 ml?
@macrossover79 жыл бұрын
Pek Cheng I don't measure exactly. Just use your feeling and try.
@bubuwong903 жыл бұрын
That wand (plastic sharp wand) just burst and drop into my milk. I have remove the outer piece of it. Is so scary
@RareshCo9 жыл бұрын
what's the name of the song ?
@macrossover79 жыл бұрын
Norah Jones "Don't Know Why"
@RareshCo9 жыл бұрын
Allen Cheuk thanks
@Denis-by8jv8 жыл бұрын
Remove the sticker just above the drip tray. good vid.
@macrossover78 жыл бұрын
As fine as possible until u find your Delonghi can't squeeze coffee out
@pixelbasedlifeforms3 жыл бұрын
Is it not a good machine? I was thinking of buying one.
@meastroparkinson52585 жыл бұрын
no way.....
@TommyTauWau4 жыл бұрын
Did your milk not taste funny coming out of that mug?
@macrossover74 жыл бұрын
it tasted good
@richardconlin32838 жыл бұрын
THAT MACHINE IS NOT HOT ENOUGTH,DONT BUY IT CRAP COFFEE
@AutoKalashnikov7 жыл бұрын
I'm guessing you didn't pre-heat the machine with the portafilter in long enough or you didn't run some water through your portafilter. Even cold ceramic/steel/glass cups will effect it. Try these first because my machine gets it to the perfect temperature.