Making Leather Hat Patches on a Laser Using Lightburn

Рет қаралды 20,762

Жыл бұрын

Making Leather Hat Patches on a Laser
In this video I go over the process of designing leather hat patches in Lightburn and then producing the product on my OMtech Co2 laser.
Leatherette with adhesive backing from JDS Industries
100w OMTech Laser
Engraving
500mm/s at 20% power .1 line interval
Cut
50mm/s at 40% power
Lightburn Course
Course.beardedbuildsco.com/store
Fuel and support me!
www.buymeacoffee.com/beardedb...
I have many of the supplies that I use listed in Amazon affiliate store:
Amazon.com/shop/beardedbuildsco
OMTech Lasers:
omtechlaser.com/LSG
Affiliate code “BEARDEDBUILDS”
Coupon code “BEARDEDBUILDS5OFF”
OMTech Laser Facebook Group:
groups/13640...
Socials:
beardedbuildsco
Facebook.com/beardedbuildsco

Пікірлер: 54

@DerekHubbard 10 ай бұрын

There are SO MANY fantastic Lightburn use tips in this video. Incredibly useful!

@BeardedBuildsCo 10 ай бұрын

Glad it helped!

@gabluesky Жыл бұрын

Awesome looking patch, thanks so much for this video, super helpful to me as a new Lightburn user.

@veterancustomwoodworx9858 6 ай бұрын

Thank you so much for the feaux stitch look! Been trying to figure this out forever!

@747dom 8 ай бұрын

So that's how we add a die-cut line around an odd shape! Thank you so much, I could never figure it out!!

@scatt8775 Жыл бұрын

Awesome video!!! Thanks for the help. I just started laser engraving/cutting about two weeks now. I feel like this is what I was meant to do. I just work and go home 😢 now I have a hobby.

@user-zl1vy4yb1k 9 ай бұрын

GENIUS Stick edge!

@Jason-un3bx 20 күн бұрын

This is AWEsome.

@BeardedBuildsCo 18 күн бұрын

Thank you!

@dannydaniels6928 11 ай бұрын

Great tutorial! Thanks for sharing!

@courtneytaylor5120 Жыл бұрын

Could you do a video talking about what all is needed to get started with a laser business? What accessories are needed/helpful to have? What you would recommend for a beginner that isn’t a desktop machine but still easy to learn to use.

@johnnyspropshop Жыл бұрын

Good looking patch both designs. Thanks for sharing.

@BeardedBuildsCo Жыл бұрын

Thank you!

@samuelreed9290 7 ай бұрын

Great video!!! And so east to follow!

@joemartinez5673 Жыл бұрын

Very nice work!

@BeardedBuildsCo Жыл бұрын

Thank you!

@RonMarshallrone Жыл бұрын

Great vid!

@scottweinbrecht2143 Жыл бұрын

great video!!

@BaybekaRanch Жыл бұрын

Hi Brandt! Thanks again for another great video. I like the 2nd version with the stitches better myself. I was wondering, is there a way that we can make the stitches bolder/fatter? Thanks for everything you do for our community. Cheers! Marco :)

@t.c6698 Жыл бұрын

Great tutorial

@BeardedBuildsCo Жыл бұрын

Thank you!

@edwymer2226 6 ай бұрын

Very Nice...

@stokiejoe-xv5fm 24 күн бұрын

Love the design, how do you get it too make multiple of something in one go? I can't figure that out so doing singles and losing the will too live with batches

@piemanz333 Жыл бұрын

Question for you, what do you use as a covering when pressing the the patch on the hat?

@thogg4 Жыл бұрын

Love all the tips here. Not a huge fan of the camera just in the corner, I need to see more of that bearded body!

@BeardedBuildsCo Жыл бұрын

Hahaha

@mattmobark8889 Жыл бұрын

Any tips on advertising these to local companies? Just wondering but how did you pick up this customer for example?

@mothpatrol Ай бұрын

You skipped over the settings you used for each layer. What did you end up using?

@raygerstner Жыл бұрын

Do you have a link or recommendations for the type of leather?

@propertysidemanagement6977 5 ай бұрын

Sorry if I missed this info, do you have an upgraded lens? I have the standard that came with the (same) laser ... and I get horrible charred edges - I cannot figure out how to reduce the charred leatherette and still CUT the patch out any suggestions? Thank you SO very much!

@loriwilliams2393 10 ай бұрын

Hi do you happen to have a setting for cut on mira 9 for the dots and cut line

@phototec Жыл бұрын

Great Video, but we need more info. What material is this and what size laser and power setting did you use? Thanks

@BeardedBuildsCo Жыл бұрын

Thank you! Everything that you are asking for was either mentioned in the video or is in the description .

@jeroenwerkbrouck2069 Жыл бұрын

Hi, thanks for the video and your settings. Worked perfectly with my Aeon 100W laser. Exept when I cut or engrave a line, at every corner, for cutting, it is not cut trough and for engraving, it is a bit burned to much. Do you have sugestions for that? Thanks.

@BeardedBuildsCo Жыл бұрын

Are you setting your min and max power to the same?

@jeroenwerkbrouck2069 Жыл бұрын

@@BeardedBuildsCo that was indeed the problem. thanks for the help.

@BeardedBuildsCo Жыл бұрын

You’re welcome!

@WooderBoyProductions 8 ай бұрын

What kind of magnets are those?

@gregmiller1663 Ай бұрын

Can't afford a laser like this. What is a good entry level laser for doing patches for hats? I can upgrade as business builds.

@MrTKYan Жыл бұрын

Hi, where do you buy your leather from? link?

@user-wp2ph2wv3b 9 ай бұрын

Loved the tutorial and just subscribed! Quick question - Do you clean the leather after engraving and before applying to a hat?

@BeardedBuildsCo 9 ай бұрын

If I am engraving with the air off then there is little to no residue and most of the time I will skip the cleaning unless I can see a need to.

@bigfranksworld 8 ай бұрын

@@BeardedBuildsCo So you usually turn the air off when doing leather?

@acostel6228 8 ай бұрын

hola, que material usas, como se llama el material que ocupas

@bigfranksworld 8 ай бұрын

A couple of questions. On the second patch (not the die cut patch, the inner line where you made the stitch line, if a person were to just leave it a line, would that engrave a solid line, and be used as a sew line or channel to sew with a sewing machine? Also, I have read that lasering leatherette or faux leather produces toxic fumes. Is that not an issue, or do you just make sure that you don't have any leaks and are venting 100% outside? Thanks for the videos and information.

@BeardedBuildsCo 8 ай бұрын

This material is specifically designed for laser engraving and is not made with PVC products. Leaving the stitch line as just a line would likely score through your material more than you would like. Ultimately you would have to test and see if you can get a result that you like.

@bigfranksworld 8 ай бұрын

@@BeardedBuildsCovery good. I see what available out there.

@bigfranksworld 7 ай бұрын

@@BeardedBuildsCo Okay, did the research on what to use. I have some leather, and will be ordering some product from probably Lonestar. One more question. On the stitch line, using leather heavy enough to cut a stitch line into ) 5-6 oz. veg tanned leather), is it possible to make that stitch line a different size as far as width? Not the width between the stitch groove/line, but the actual width of the stitch line, so I could match the width and depth of the size of my thread, which would be #92 bonded nylon (like you would use for much heavier leather. Thanks again!