Showing the process of making my first hand paws for my first fursuit. Check out where I made the head base! • Making My First Fursui... linktr.ee/Kasperanza #fursuit #fursuitmaking #paws
Пікірлер: 58
@zamaii_8 ай бұрын
2:14 hey!! mistakes are common with sewing machines! (I would know since i've made my fair share of mistakes while using one lol), you don't need to go get another piece of fabric if you mess up, you can use a seam ripper to remove the thread, then try again! also, if you're wanting to get cheap fabric for practice with your sewing machine, i'd highly recommend seeing if a walmart nearby has a craft section, if it does you can probably find really cheap fat quarters! (it's like $1-2~ish for a good chunk of fabric where I live), I use fat quarters to practice patterns before I use the actual project fabric, they're these semi large cotton rectangles, very easy to sew with! I used to be afraid of using my sewing machine too, but when i started getting a bit of practice it's made my life a whole lot easier :)
@Kasperanzaa8 ай бұрын
Hi, thank you for the advice! I'll look into investing into a seam ripper. I almost forgot Walmart has fabric, so yeah I'll definitely get some there. You're right, I gotta learn how to use my sewing machine already!!!
@osteophagus8 ай бұрын
I've honestly been terrified to actually start working on my own partial because I don't want to make a super ugly failure or I'll feel too bad to ever try again. But seeing how nice it can turn out when you just research, follow tutorials, and take your time is really encouraging! You did such a good job! Love your sona design too
@Kasperanzaa8 ай бұрын
It’s okay, I was really scared to start mine too! I procrastinated so much it was ridiculous. It’s honestly best to just fail a lot really quickly. Thank you! Good luck in making your fursuit, and that’s good you’ve started using your sewing machine :3
@Old.acc.lol128 ай бұрын
I could never make this, so when you're critisizing yourself, I'm congratulating you.
@Kasperanzaa8 ай бұрын
Aww, thank you!
@JEREMYTHOMPSON-sn5iq7 ай бұрын
I love the fursuit so far! I hope that you keep working on it and don't give up! I see lot's of potential for this fursuit and hope that you don't give up no matter how hard the work is. Would love to see it finished!
@Kasperanzaa7 ай бұрын
Thank you very much! I've been procrastinating a lot, but I am making progress on it. I hope to finish it soon!
@mandyeosphantasmas12028 ай бұрын
You can ladder stitch the claws on top of the finished fingers!!
@Paws.withclaws8 ай бұрын
Turned out cool !!
@riley55417 ай бұрын
been doing heaps of research into making a partial and this helped give me some confidence because you pulled it off so well man!!! I was so excited to see it come to frutition and your character looks awesome!!!! super job!
@Kasperanzaa7 ай бұрын
Thanks so much! Making your own fursuit is definitely intimidating, so I'm glad it gave you some confidence! :3
@StarByTheSea7 ай бұрын
Who thinks we need a part 3 of making a tail
@Kasperanzaa7 ай бұрын
Don't worry, I'm working on it! >:3 Foot paws first actually and then the tail
@StarByTheSea7 ай бұрын
@@Kasperanzaa oh! Ok I understand I bet it is gonna look great! I love it so far
@Anim8Dragon7 ай бұрын
I literally used this same pattern and tutorial for my handpaws! XD Those turned out great, love the pop of orange!! You can probably sew that one claw back together with a ladder stitch!!
@Kasperanzaa7 ай бұрын
It's a great tutorial! RunnerRabbit did a good job. And thanks! Orange is my new favorite color. Lol yes, I need to sew it back on again. Can't have it flopping around anymore.
@Inuyashayokai17 ай бұрын
It turned out soooo good 😍 i like your choice of color for the fur
@privateaccount56168 ай бұрын
Yeah I’ve seen that tutorial aswell, I can still confidently say that they look amazing
@Greg37068 ай бұрын
Looks amazing!!! Love the commentary, honestly made me chuckle a couple times!
@Kasperanzaa8 ай бұрын
Thank you very much!!
@Devils_Demise8 ай бұрын
Biker confirmed.....drip status....8/10
@RakuFerret8 ай бұрын
Looking good! Fursuit paws are always a real butt to make I swear XD Also no one is ever comfy with a sewing machine at first, just takes some time (and a lot of seam ripping lol). For smaller parts like paw digits, hand sewing is honestly a better method to me :3 One thing I learned to live by making fursuits is that you can always fix what you do. Don't be afraid to mess up~
@GuppieFishie8 ай бұрын
I'm also making my first suit and I have the same tutorial saved for the paws haha xP I'm so glad I found your videos, it's super encouraging to know there's other people out there trying to overcome the same struggles haha. watching this while making the fabric pattern for the head >_
@Kasperanzaa8 ай бұрын
Well, it's a pretty good tutorial so Thank you! I'm glad that showing my journey helps others on their journey :3
@CorriTopaz6 ай бұрын
You can get a small, sharp pair of scissors to avoid cutting fur fibers. I personally use a small pair of scissors that I think came from a nail care set. I sometimes also use thread clippers (probably a crime to use those for cutting fabric, but it gets the job done). Whichever blade is on the fur side when cutting, I keep it close as I can to the backing to avoid cutting any fibers. I've also seen people use those small X-acto blades to cut fabric, which doesn't really work for me probably because mine are too dull.
@CorriTopaz6 ай бұрын
And the worries about using a sewing machine is real 😂 Definitely do practice with spare fabrics. I've used one for fursuit making and it makes the sewing process so much quicker. I mostly use it for claws or parts that aren't too precise, though I mostly stick with hand sewing. It can be risky using it to sew faux fur because it's so thick. I had a needle get bent once, luckily it didn't snap. Just go slow. I believe most sewing machines have a hand crank that I sometimes use to get around tight curves and corners.
@CorriTopaz6 ай бұрын
Ooh, turning the paws inside out. It's probably easier to first turn the fingers inside out first and then turn out the rest of the paw.
@Kasperanzaa6 ай бұрын
These are excellent tips that I never thought of! Thank you, I'll definitely apply them to future projects!
@averagenewtlover23 күн бұрын
we have the same headphones
@savin02798 ай бұрын
This was a awesome video, thanks for sharing! Also, the color scheme goes hard!
@tomnumeco05268 ай бұрын
Loving how the beans are turning out!!
@GabrielLites8 ай бұрын
Great job!
@cerealistired8 ай бұрын
this fursuit looks amazing so far !! i love how u made it, really makes me wanna try myself !!!!!!
@Elimurphydex8 ай бұрын
The paws are so cute!
@Cod-EH8 ай бұрын
looks phenomenal!
@Lilah-bd3kd7 ай бұрын
In my opinion, its hard to pull of that style,but you nailed it! Good job!
@oceadiuli27236 ай бұрын
Nice work
@Leo_kys6 ай бұрын
love it
@n1tro_proto7 ай бұрын
Cute ❤
@hornetthehivewing62658 ай бұрын
It's coming along very well! Can't wait to see what you do next!
@Kasperanzaa8 ай бұрын
Thank you very much! I'm excited for what's next too :3
@hornetthehivewing62658 ай бұрын
I want to make my own suit (and be a maker) in the future as well. It will be a (long) while before I can start, but I am looking forward to that day!@@Kasperanzaa
@Khunai.8 ай бұрын
Good job! Your first fursuit is coming together quite well. I am starting the process of making my first suit and I purchased a 3d printed head base because I had ZERO confidence in carving the foam to make a symmetrical head. Great work so far :) Neffertity and Skyehigh Studios have some great fursuit making tutorials for other parts as you continue to make your suit or experiment with more in the future :)
@Kasperanzaa8 ай бұрын
Thank you so much! And yeah Skyehigh and Nefertity are wonderful! Good luck in making your fursuit! Getting the head 3D printed surely makes it easier.
@jackspedicy27118 ай бұрын
inspirational... i need to buy tools, and find a e-shop to order materials so i too can make a fursuit. but i have yet to start ;w; and i think its literly just fear of failiure making me give up before even starting :
@Kasperanzaa8 ай бұрын
Go for it! The worst that can happen is that you mess up, but you can just try again. That's the great thing about life is that for most things you can just try again.
@oceadiuli27236 ай бұрын
I used the same patern to be honest
@TuNd4AaAaA8 ай бұрын
The moment I saw the paws the aliens tought that that’s a beautiful alien child
@dr.zypher8 ай бұрын
Don't worry I also bought a sewing machine, still haven't used it cause I'm scared I'll break it!
@iwlle36467 ай бұрын
What stitch did you use for the paw pads? Can anybody tell me?
@Kasperanzaa7 ай бұрын
I used the backstitch, for the hand paws (including pads) and my head base. I was led to believe that it’s the strongest one, so I’ve only used that one so far.
@iwlle36467 ай бұрын
@@Kasperanzaa thank you so much for telling me 😊😊
@Kasperanzaa7 ай бұрын
@@iwlle3646 you're welcome 😁
@DELTA-AGENT117 ай бұрын
What's the name of your fursona?
@Kasperanzaa7 ай бұрын
Kasperanza
@DELTA-AGENT117 ай бұрын
Makes sense lol@@Kasperanzaa
@SDT4937 ай бұрын
how rich is this guy? looks like a teenager but has a mansion what