🟢 Making Precision Miter Gauge 👍 FREE PLANS Miter Gauge 👍 Don't Repeat My Mistakes

  Рет қаралды 1,616,528

GRINwood

GRINwood

5 жыл бұрын

In this video i show you how i made my precision miter gauge with nonius for my homemade table saw.
All plans I ever made I collected in one place. Save this link for future - I will add new plans to this collection and don't forget to subscribe to my channel to stay tuned.
drive.google.com/drive/folder...
Support GRINwood:
PayPal: grinwooddesigns@gmail.com
Other tool making videos:
My homemade table saw free plans: • 🟢 My Homemade Table Sa...
Homemade bar clamps: • 🟢 Bar Clamps DIY - Mak...
Homemade marking knife: • 🟢 Marking Knife Build ...
Hope you will not repeat my mistakes and make your miter gauge more accurate.
Please like and subscribe! And happy woodworking!
First of all i want to say sorry for my english, i know it's fare from perfect, so please correct me if you see errors. Thank you
Transcript:
00:15 first of all i started sanding 1mm thick aluminum sheet with 150, 220 and 320 grit sandpaper
00:32 cleaning surface with acetone, i used a nail cleaning liquid, as for me it works good also
00:44 print flipped images on glossy photo paper (or other laser iron transfer paper, my was 150g/m) on laser printer with maximum toner settings. Also print it with 100% scale. Download images here:
grinwood.co/making-precision-m...
01:20 started transfering images to the aluminum surface. For this purpose i used an iron in three dots mode (maximum). Few napkins helped to distribute precure evenly.
02:22 despite my best efforts, I have failed.
if you know why the image transfering partially, please leave your opinion in comments
02:38 my second try was not much better but good enough for me, themost important part transfered good
02:50 some dots that not transfered i protected from etching with nail lacquer
03:05 etching electrolyte i prepared with water (40g) and salt (about 10-15g)
03:10 for this purpose i use a 12v 3,5A car battery charger. Positive terminal connect with etching detail and negative use as etching tool.
03:55 continue etching until you will fill the relief with nail
04:23 cleaning toner with nail liquid or acetone
05:53 my second fail, i forgot that metal is much harder than aluminum and it can leave a scratches, don't do like that
06:35 gluing aluminum sheets to the plywood with super glue
09:15 when i drilled this 10mm hole the drill bit muve a little left and subsequently the center moved to, but thanks God it was not
affected the accuracy.
09:47 with this reaming mill i made a precision holle for 8mm bushing that is just a little longer than this angular scale board.
10:22 drilling 8mm holes in nonius part for 6mm screws. That holes are bigger just to give nonius a space for calibrating
10:38 yes, i for got about clamping slot 😜
15:58 yes, t-track are much better for this purpose, but i didn't have that so here is my solution. One day i will rebuild it for sure :)
16:10 making bolts for t-track from wide head furniture bolts.
18:00 i decided to glue up aluminum pipe in one of plywood pieces to fix it there securely.
18:25 assembling
19:11 angle calibrating
19:28 whe the piece you cut is perfectly square, set up the nonius part in position 0 degrees
19:44 making a quick set up holes. I made them for 0, 10, 22.5, 30 and 45 degrees
Hope this information was helpful
Support GRINwood:
www.etsy.com/listing/774944100
GRINwood shop:
www.etsy.com/shop/GRINwood
Follow GRINwood:
/ grinwoodprojects
/ dakhnogregory
/ grinwooddesigns
/ grinwooddesigns
Music
Silent Partner - Parasail • Silent Partner - Paras...
Cloud Patterns - Silent Partner • Cloud Patterns - Silen...
St. Francis by Josh Lippi & The Overtimers Video Link: • Josh Lippi & The Overt... .
Would you like to use my videos in your media projects?
Please contact me: grinwooddesigns@gmail.com

Пікірлер: 404
@Lwimmermastermetalart
@Lwimmermastermetalart 2 ай бұрын
Quite clever young man. Always love watching how ppl are so resourceful in making things.
@charlottegeorge3054
@charlottegeorge3054 Жыл бұрын
This is a valuable addition to my woodwork collection kzfaq.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.
@lynardburt5992
@lynardburt5992 3 жыл бұрын
When you were cutting the layout sheets, the aluminum sheet looked still damp in some areas 0:57 - 1:14 I believe that sheet wasn't totally dry where the toner didn't stick. I learned a few things here, you gave very good detail information in the comments area with references. Making your own T-track and screws was perfect for this. Saved money, and showed you don't need aluminum tracks. I'm 70, retired mechanical/electronic technician 40 years, I learned a great deal
@thorlo1278
@thorlo1278 4 жыл бұрын
Not only was this great work you did, I have been wanting this very device for my Ryobi Table saw! Thanks for a great video, free plans and detailed information. This is just awesome from a true woodworker. 2 thumbs up!!
@ronweasley4628
@ronweasley4628 4 жыл бұрын
THANK YOU :-) for sharing - and for warning us about the mistakes we could make as well - and plans, and sketchup ... first class video - thanks again !!!
@GRINwood
@GRINwood 4 жыл бұрын
Thank you, guys, for watching my videos, thanks likes and comments! I appreciate it very much!
@crowbarzero
@crowbarzero 4 жыл бұрын
been going thru things trying to learn different woodworking/shop techniques/ideas and I picked up a ton from this. Thank you!
@9jep
@9jep 4 жыл бұрын
Man, you are one trip. Brilliant and well done.
@j.m.castilla7150
@j.m.castilla7150 4 жыл бұрын
Great thanks for your videos A greeting from Spain I am 60 years old, 30 years old as a carpenter and I still learn from you, thanks again
@PrincipeMaquiavelo
@PrincipeMaquiavelo 4 жыл бұрын
Lo de el autor es de libro.
@robertstigter9195
@robertstigter9195 4 жыл бұрын
Great video with a fantastic result sir. Thank you for uploading this beautiful project. Regards from Germany, Robert.
@alangardiner872
@alangardiner872 3 жыл бұрын
one of the best videos I have viewed and being a precision engineer, I appreciate ( and respect) the skills, attention to detail and the profound ingenuity...top marks young man!!...
@SY-oy7st
@SY-oy7st 3 жыл бұрын
Incredibly innovative work, excellent results. I truly appreciate your awesome wood working videos. 👍🏻
@dexantochannelcast
@dexantochannelcast 4 жыл бұрын
Реально круто - много полезного для себя почерпнул. спасибо
@Rocadamis
@Rocadamis 3 жыл бұрын
A pleasure to watch. Really clever and creative ideas for this build.
@gsxxxrrr
@gsxxxrrr 4 жыл бұрын
Loved it, I have been looking for something like this for ages. Good work.
@dangle4793
@dangle4793 4 жыл бұрын
goo.gl/search/Th%E1%BB%9Di+ti%E1%BA%BFt ☀️ Nhiệt độ là 12°C tại Thụy Ninh
@user-xh9ld9mb9c
@user-xh9ld9mb9c 4 жыл бұрын
Молодец, ручки прямые, откуда надо. И работа красивая и результат великолепный. Беру на заметку. РЕСПЕКТ! 👍💪👏🏆🎆🤗
@GRINwood
@GRINwood 4 жыл бұрын
Благодаря таким коментариям, хочется продолжать работать и делится опытом, спасибо тебе, Ромка!
@FantaBH
@FantaBH 4 жыл бұрын
Incredible master pace , do I have to say more , ah yes, thank you big time for this video, you helped me a lot.
@roddrasmussen5175
@roddrasmussen5175 3 жыл бұрын
Absolutely fantastic, wonderful work.
@davetaylor2088
@davetaylor2088 3 жыл бұрын
Pure genius and your English is just fine mate.
@flowerchildtokyo
@flowerchildtokyo 2 жыл бұрын
I love everything about this video! Brilliant work.
@jorgeconcheyro
@jorgeconcheyro 4 жыл бұрын
Absolutely amazing!!!!
@DucTran-ce6mg
@DucTran-ce6mg 4 жыл бұрын
OMG - You're good. Thanks for sharing this tutor.
@SantiagoRetoque
@SantiagoRetoque 4 жыл бұрын
que gran proyecto, muy creativo y contiene muchas ideas aplicables. gracias por este video
@carlosg5633
@carlosg5633 4 жыл бұрын
A great Job... greetings from México City
@raptors3164
@raptors3164 3 жыл бұрын
Excellent idea and build, outstanding results. Thank you for sharing. 👍👍👍👍👍
@peterkang7515
@peterkang7515 4 жыл бұрын
Awesome...Great work!! Thank you!
@madswh
@madswh 4 жыл бұрын
Amazing! Brilliant and inexpensive way of etching the aluminium :)
@walterfinster9289
@walterfinster9289 4 жыл бұрын
Fascinating, hardcore, you have some great skills and ideas!
@georgesmillion3131
@georgesmillion3131 4 жыл бұрын
Magnifique travail !!! Красивая работа !!!
@affixplay
@affixplay 4 жыл бұрын
Прочувствовал всю боль на себе. Отличное видео! Спасибо.
@avrahamkrichevsky4831
@avrahamkrichevsky4831 4 жыл бұрын
This way of etching a dial with xerox copy and galvanics is just BRILLIANT! Thanks a lot! Gonna use it now!
@agp7073
@agp7073 4 жыл бұрын
Hi from California. Well done!!!
@maurofigueiredopinto3642
@maurofigueiredopinto3642 4 жыл бұрын
Thanks for this very very good video. I learned a lot.
@kennethcave1091
@kennethcave1091 4 жыл бұрын
brilliant piece of work well done
@tolentino1965
@tolentino1965 4 жыл бұрын
Excelente trabalho !!! Obrigado por partilhar ! Obrigado pelo projecto.
@christopherboyd7335
@christopherboyd7335 2 жыл бұрын
Very informative video. I learnt a few new things.....The etching process, transferring images to aluminium, and "nonius"- or vernier. I will be watching again a few times before I make two- one for me and one for my son.
@benoitdugas745
@benoitdugas745 3 жыл бұрын
Very professional thank you!
@89cousin69
@89cousin69 4 жыл бұрын
Great work very good idea keep up the good work.
@luiscarlossuarezmarquez264
@luiscarlossuarezmarquez264 3 жыл бұрын
Really amazing!!! Your a first class carpenter!
@guyvangenechten6484
@guyvangenechten6484 2 ай бұрын
Very very Nice job!!! Looking very good!!!👍👌💯
@dominiquedesbiens4383
@dominiquedesbiens4383 4 жыл бұрын
Jolie travail bien pense a faire Merci pour cette video
@seabex5162
@seabex5162 4 жыл бұрын
Wow, this is a amazing Project. i try to build that. Have long search for a Miter Gauge like this. Thank´s for That Video. Greetings from Germany Stuttgart
@GRINwood
@GRINwood 4 жыл бұрын
You are welcome, my friend. Thanks for watching!
@cw4608
@cw4608 4 жыл бұрын
You are very clever. I love your spindle sander hack!
@diggaboy5006
@diggaboy5006 4 жыл бұрын
Brilliant , thanks for the techniques I cant wait to try them.
@FromDarkness2Light203
@FromDarkness2Light203 4 жыл бұрын
Amazing Video, Incredible Skills,Thank You For this Instrumental Vídeo.....
@markgilder9990
@markgilder9990 4 жыл бұрын
This is on another level😮
@Mohamed-pm3dn
@Mohamed-pm3dn 4 жыл бұрын
Great work Will done
@juanmariagonzalez2234
@juanmariagonzalez2234 4 жыл бұрын
just fantastic
@paulohchagas1558
@paulohchagas1558 4 жыл бұрын
Ótimo trabalho ficou perfeito.
@uktay001
@uktay001 4 жыл бұрын
Brilliant video you are very talented thanks for sharing.
@alanjohnson2673
@alanjohnson2673 Жыл бұрын
Absolutely brilliant, thank you very much
@Robc509
@Robc509 4 жыл бұрын
You have some great videos with some very good ideas. Thank you
@masterblaster2882
@masterblaster2882 4 жыл бұрын
Those miter bars are slick.
@user-kr4wl9by6j
@user-kr4wl9by6j 3 жыл бұрын
Просто и точно, а главное технологично! Под любые требования мастера👍. Стоит внимания и увадения. Благодарю.
@dardonestorguastavinoalpui4393
@dardonestorguastavinoalpui4393 4 жыл бұрын
Felicitaciones!!! Y gracias por compartir.
@WoodworkJourney
@WoodworkJourney 2 жыл бұрын
This video is bloody brilliant! Thank you
@markgilder9990
@markgilder9990 4 жыл бұрын
Clever method for Anodizing.👍🏻👏👏👏😎
@batirjumaev7487
@batirjumaev7487 4 жыл бұрын
Ну ты и монстр !!! Спасибо за отличный ролик. Лайк
@truthserum5202
@truthserum5202 4 жыл бұрын
Nice work...bravo!
@adrienlanglois4963
@adrienlanglois4963 2 жыл бұрын
monsieur, c'est la meilleure explication détaillée d'un travail que j'ai vue sur youtube pour ce qui est de la traduction moi je marque a la fin ¨ google translation¨ continues a faire des vidéos , merci pour tes renseignements.
@MrAleanor
@MrAleanor 4 жыл бұрын
congratulations very good job
@mattedwards4533
@mattedwards4533 4 жыл бұрын
Nice job! I wish I had as much patience as you evidently have.
@GRINwood
@GRINwood 4 жыл бұрын
Thank you for watching my videos, Matt!
@kevvyg04
@kevvyg04 3 жыл бұрын
Angle calibration omfg amazing brilliance much respect ✊
@EmileJrManigat
@EmileJrManigat 4 жыл бұрын
Felicitations. Bravo ! C'est du superbe travail et merci pour l'inspiration et d'inspirer les autres.
@GRINwood
@GRINwood 4 жыл бұрын
Thank you for your comment, my friend. Don't miss up a new video about my homemade table saw with free plans also i'm working on. Hope you will like that too
@metalshopwithtroy5755
@metalshopwithtroy5755 4 жыл бұрын
Great work just amazing already making it. Thank you for your diy instruction
@GRINwood
@GRINwood 4 жыл бұрын
You are welcome, Troy! Could you please show us your miter gauge hwen finish? Thanks
@metalshopwithtroy5755
@metalshopwithtroy5755 4 жыл бұрын
@@GRINwood sure will
@BigmoRivera
@BigmoRivera 4 жыл бұрын
Nicely Done ✅
@WladimirC
@WladimirC 4 жыл бұрын
Super ,impatient de voir la prochaine vidéo.
@rociosantos578
@rociosantos578 4 жыл бұрын
Un trabajo excelente, gracias por publicarlo.
@janjankowski1979
@janjankowski1979 4 жыл бұрын
I think you have done a great job. Congrats !
@GRINwood
@GRINwood 4 жыл бұрын
Thank you, my friend, I'm glad you liked it!
@blissacer
@blissacer 4 жыл бұрын
Bravo merci beaucoup
@MrMraza123
@MrMraza123 4 жыл бұрын
Brilliant design.
@mirockswoodshop
@mirockswoodshop 4 жыл бұрын
Nice!
@Thanos0001
@Thanos0001 3 жыл бұрын
Very clever.
@paulogoncalves1071
@paulogoncalves1071 4 жыл бұрын
Amazing job
@MarkSmith-rb5mc
@MarkSmith-rb5mc Жыл бұрын
Very impressive. I am definitely going to build this.
@borgesfh
@borgesfh 4 жыл бұрын
Ficou perfeito !!!!
@eduardoOlima
@eduardoOlima 4 жыл бұрын
Nice and very nicely done! Congrats!
@goliatta
@goliatta 4 жыл бұрын
Excelente trabajo, Tienes mi like, y sigo tus fabulosos trabajos.
@gammaxf
@gammaxf 4 жыл бұрын
Que se vaya a la mierda! Para hacer eso tengo que invertir mas de lo que vale lo que hizo.
@danig.ordiales4907
@danig.ordiales4907 3 жыл бұрын
@@gammaxf nunca tendrás la satisfacción y el aprendizaje de hacerlo tú mismo. El valor de eso no es cuantificable.
@gammaxf
@gammaxf 3 жыл бұрын
@@danig.ordiales4907 😭
@totobill22
@totobill22 4 жыл бұрын
Vous avez un abonné de plus pour la qualité de votre travail et votre partage. Bravo !
@GRINwood
@GRINwood 4 жыл бұрын
Thank you, my friend. This friday i will upload a new video with free plans of my homemade table saw, don't miss it. Thanks!
@surjantowidjaja9489
@surjantowidjaja9489 2 жыл бұрын
Great guide, excellent..... 👍👍👍. I like it the way you guide and the comments.... Very useful 👌
@mariushodea1736
@mariushodea1736 3 жыл бұрын
Superb,studii in chimia coroziva este geniala,DA,imi place aplicatiile si cautarile curioase ale oamenilor inteligenti
@crossgrainwoodproductsltd9230
@crossgrainwoodproductsltd9230 4 жыл бұрын
Excellent!! Wow, I will take the free plans, but you really should charge for them. Even if it is just a dollar or two to cover the cost of materials. That way you will be able to buy the items for your next project. I started to watch this and had dejavou. I have been looking for this video and forgot to subscribe the first time I watched it. I am now a sub. so I don't miss any other cool builds! Thanks very much for the plan!!!!
@DonBishopDonSongs
@DonBishopDonSongs 4 жыл бұрын
I like this design. Thanks for sharing the Plans:) Don
@khwarmughal
@khwarmughal 4 жыл бұрын
You r an artist !
@welesqwerty5926
@welesqwerty5926 4 жыл бұрын
перевод- ТЫ АРТИСТ ))))
@jlippencott1
@jlippencott1 4 жыл бұрын
It is amazing and genius what one can do to with a bare minimum of tools to create another tool with such precision and utility. Many of us with a complete machine shop can take away the craftsmanship produced here as a lesson in modest ingenuity.
@cidneicarbobiach733
@cidneicarbobiach733 4 жыл бұрын
Excelente trabalho
@richarddebeer1039
@richarddebeer1039 10 ай бұрын
Thank you
@hotmanmogayakinsitompul6805
@hotmanmogayakinsitompul6805 4 жыл бұрын
Amazing...good job...
@peteward6478
@peteward6478 10 ай бұрын
I have downloaded most of your pdf's and fully intend to use them for my currently unfinisned workshed. It is truly inspirational to watch you work and hope to continuingly do so. :) Thankyou.
@danieldenajar5214
@danieldenajar5214 8 ай бұрын
😊😊😊😊😅😮
@eliascontreras2417
@eliascontreras2417 4 жыл бұрын
Muy bueno felicidades
@---xo2wv
@---xo2wv 5 жыл бұрын
Nice job!
@GRINwood
@GRINwood 5 жыл бұрын
Thank you, my friend!
@vicente6165
@vicente6165 4 жыл бұрын
Gracias Grinwood por facilitar ese material* será muy útil para mi Mesón de corte
@THEXTRANGEROUS
@THEXTRANGEROUS 3 жыл бұрын
Excelente! Muchas gracias por compartir el diseño, así podré fabricarlo.
@BaronvonBavert
@BaronvonBavert 4 жыл бұрын
good job !!
@brigitteschwarz2217
@brigitteschwarz2217 4 жыл бұрын
Muy bueno y práctico video para enseñarnos una forma de hacer nuestras propias herramientas. Muchas gracias.
@mehdipascal250
@mehdipascal250 4 жыл бұрын
Très beau travail.
@vikramkhaira7070able
@vikramkhaira7070able 4 жыл бұрын
Grt build !!! Keep up
@jordanmartin8562
@jordanmartin8562 4 жыл бұрын
Magnifique 👌🏻
@zafardurrani9544
@zafardurrani9544 3 жыл бұрын
Once again, you are great with greatest effort and Invention, love your Excellent experience, I saw the free plan in the description and again I can say you are creating History, your name will be written in woodworking History with Golden colours, Thank you for providing me the best knowledge and beautiful video, Zafar from Quetta Pakistan
@giuseppec.6681
@giuseppec.6681 3 жыл бұрын
Very artist!! Excellent!!👍👍
@LeosTueftelei
@LeosTueftelei 4 жыл бұрын
Good idea and nice work ! 👍
How to make an Angle-jig that reuses a protractor
16:00
JSK Projects
Рет қаралды 403 М.
Making a Super Accurate Miter Gauge
15:59
Patrick Sullivan
Рет қаралды 1 МЛН
СНЕЖКИ ЛЕТОМ?? #shorts
00:30
Паша Осадчий
Рет қаралды 2,8 МЛН
When someone reclines their seat ✈️
00:21
Adam W
Рет қаралды 24 МЛН
Increíble final 😱
00:37
Juan De Dios Pantoja 2
Рет қаралды 19 МЛН
Only My Own Miter Gauge Special Edition / Dewalt Table Saw 7492
16:02
CarpenTAK_DIY Woodworking
Рет қаралды 667 М.
Great idea for a home workshop, a simple device just for you!
8:04
DIY Table saw fence
13:43
mr. IQ homemade DIY
Рет қаралды 147 М.
This Tool Saved Me More Than $400
10:28
GRINwood
Рет қаралды 78 М.
Throw Away Your Miter Saw and Make this Instead
15:18
John Heisz - I Build It
Рет қаралды 85 М.
⚡[DIY] All-in-one table saw sled / Various functions / Woodworking / Tips and tricks
21:21
12 Simple Trim Router Hacks | DIY Woodworking
18:45
YASUHIRO TV
Рет қаралды 1,8 МЛН
คักอีหลี
0:11
เลาะและหาแซ่บไปเรื่อย
Рет қаралды 54 МЛН
Please Love Your Self (P10)
0:21
Discovery Boy
Рет қаралды 12 МЛН
My Family ❤️
0:29
Dragon Нургелды 🐉
Рет қаралды 6 МЛН
2000000❤️⚽️#shorts #thankyou
0:20
あしざるFC
Рет қаралды 10 МЛН