Making Reflective Mirror Dice

Рет қаралды 93,004

2 жыл бұрын

Mirror Mirror on the Dice, who's the one who looks REAL nice? Oh... So... Not me then?
Check out Dicey_Encounters on Instagram - / dicey_encounters
AND The Dicey_Encounters store- www.diceyencountersdice.com/shop
Also check out Alchemical_Gems and Arcana_Cast on Insta!
/ alchemical_gems
/ arcana_cast
Support the channel and earn some amazing perks on Patreon! / rybonator
Join the Dice Goblin Discord! / discord
If you like twitter, I got one! / rybonator1
I also have an Instagram! / dm_rybonator
If you want to mail me something, here is my Private Mailbox Address, so you can send me stuff to look at. I can't promise that I'll review them, but I'd love to see what you make! (Or just tweet me pictures if you make something, that's nice too!)
Rybonator
3515 Longmire Dr., STE B PMB 277
College Station, Texas 77845
AMAZON AFFILIATE LINKS TO THE PRODUCTS I USE IN THE VIDEO (I get s small % kickback for purchases you make, at no cost to you :). Thanks for using these, but don't feel obligated. )
Liquid Chrome: amzn.to/3i0Si7y
Envirotex Lite Resin: amzn.to/3ep4Txu (Available in gallon purchases as well.)
Zona Polishing Papers: amzn.to/2XY4VXl
Alcohol Ink: amzn.to/2YLeisi
Mica Powders: www.madmicas.com/
Dragon Skin Silicone (More durable than the others, but more expensive.) amzn.to/2Apx8xD
Sorta Clear 37 Silicone (Not the exact same as 12, a bit more rigid.) amzn.to/3e06uJT
Dice Box Mold: amzn.to/3hZOALV
Ready To Go Pressure Pot: amzn.to/3b6ngr0 (As long as you have a male and female end for your air compressor.)
If you have any ideas for what you would like to see built/reviewed in the future, let me know in the comments down below! Then subscribe so you don't miss any new videos coming out in the future! Also, if you liked this, gimme that sweet sweet like.

Пікірлер: 506

@Rybonator 2 жыл бұрын

You asked for it, so here it is :) Took weeks to get the paint to dry to properly do these dice, and a few failed sets. So I hope you enjoy!

@Binkskitten 2 жыл бұрын

Yes! Beebs is happy. I’ve been waiting so long 🥰 it’s worth it, so so worth it

@WizarfOneOhOne 2 жыл бұрын

I love these so much!! Another airbrush paint for chrome could be SprayTax Chrome! It's very nice!!

@scorpius1401 2 жыл бұрын

Thank you for this video 💚

@SnapshotSam 2 жыл бұрын

Can you post the failed sets as a YT short or on your twitter? im curious to see the results.

@wesss9353 2 жыл бұрын

What are the dimensions of the dice?

@polo150 2 жыл бұрын

You can get a two part spray that gives you a real silver metal coating over plastic, which can give you a good mirror finish. I think it would be cool to see you try that on another project

@Rybonator 2 жыл бұрын

I can look into that :)

@joshuahancock2079 2 жыл бұрын

You can also use a sputtering furnace or focused ion beam to deposit metallic vapor onto material if you ha e access to a crazy laboratory haha. Those get really mirror like finishes.

@gabrielspangler6964 2 жыл бұрын

came to mention this same thing. I saw another video on here about adding the silver finish to 3d printed models. Also if your really committed maybe try electro plating

@YuliaLinderoth 2 жыл бұрын

Or very much over-the-top; a hollow dice filled with gallium.

@Magmafrost13 2 жыл бұрын

@@joshuahancock2079 colab with Thought Emporium lol

@ShadeThought 2 жыл бұрын

I have 2 suggestions. 1) If you were to try this again, maybe try sanding the black inside dice before putting the chrome paint on them to make a super smooth base layer 2) For nail art, they make chrome powder. Essentially, when using them on nails, you make your base coat as smooth as you can possibly get it, then buff the powder into the base with an eyeshadow sponge thing. I'm wondering if resin would be the right texture to allow you to buff that powder on and get the same effect. Then you would just have to "seal" your dice with some kind of clear coat paint/spray/resin.

@lilkingtrashbaby 2 жыл бұрын

I can see the chrome dust in the paint slightly separating and causing the dullness he has. I think the chrome powder might have the same issues because chrome nails also go dull in the same way with the wrong top coat.

@Sherrycake 2 жыл бұрын

I second this!! If your base isnt smooth you never gonna have a good reflextive dice! And i would never have thought about the chrome powder but thats a awesome idea

@Stormandfire 2 жыл бұрын

Yes! I'm curious about the chrome nail powder too! Especially since it works best with gel polish, which I think is a kind of resin? (it undergoes a curing process - it feels similar, even though the different chemicals might not be the same)

@nicolelavigne1700 2 жыл бұрын

Those nail powders are very particular about how you seal them. You can't use a regular clear nail polish as that breaks the smoothness and makes it look like particles. You have to use either a gel top coat, which cures under UV light like UV resin, or a water based top coat to get a similar effect. I don't know if that would be much more reflective than the air brushed chrome paint was before it went into outer layer of resin, but maybe it's a hint to how to coat them to protect the chrome pigment either before doing the outer layer or skipping that. And definitely any mars or imperfections in the surface will show through the chrome and whatever you seal it with.

@lamipurpure7992 2 жыл бұрын

So actually in the resin community, a lot of people will take chrome powders and "buff" them directly onto smooth silicone molds before pouring and clean up the raised bits of the mold with a q tip and rubbing alcohol. I don't recall how smooth it can get, but the surface layer stays pretty well

@PrincessSixThirteen 2 жыл бұрын

I feel like I'm in the majority when I say: these and great, 10/10 would roll again. Also, the quest for mirrored dice must continue until you achieve proper reflective gloss.

@Rybonator 2 жыл бұрын

THE SEARCH CONTINUES :D

@Cerena06 2 жыл бұрын

"A very scientific amount, that should do it!" got a legitimate laugh from me. Thank you :)

@EneaG Жыл бұрын

same ahahah

@paulinapaola 2 жыл бұрын

I THOUGHT THE EXPERIMENT FAILED SO YOU BURIED IT OMG I'm so glad to see it's here

@Rybonator 2 жыл бұрын

It failed a lot, but finally got it working :)

@geminidragon33 2 жыл бұрын

As an avid lover of silver, I think this set looks awesome, even after the clear shell dialed down the reflectiveness. 😁 Mayhaps there's a super shiny gold paint that can be airbrushed on, thus creating a golden set worthy of the Rybonator's gold fancy? 😆 I'd totally wanna see that video if possible! (Also waitin' on the next episode of "As the Skillshare Turns"...or is it maybe "The Skilled and the Restless"...? 🤔)

@Rybonator 2 жыл бұрын

I've heard that you can do a layered approach and paint it yellow then chrome to get a good gold ;D The Skillshare Saga season finale comes 12/18 ;)

@themagnushjort 2 жыл бұрын

@@Rybonator I think a brown or orange base, chrome on that and a yellow clear on the chrome would make a really good gold.

@carebear3120 2 жыл бұрын

Gold leaf on the inner part would look cool af

@HagenBraun 2 жыл бұрын

In my experience from miniature painting, if you want to preserve the characteristic mirror shine of good metallic paints, you can't really put anything on top of them. No paints, no inks, not even clear gloss varnish (which will make it look like metal wrapped in plastic). It just always changes the finish. I think the same thing happened for you when you encased your dice in that clear resin. That said, there is a product by Vallejo called Metal Varnish, which I have not tried myself, but which apparently preserves the metallic finish. I think you will have to put some kind of coating over the liquid chrome because it's really not made for miniature/dice painting and rubs off pretty easily. I think you had the right idea applying it over a glossy black surface. That generally gets the best results. Maybe consider priming the blanks to help it stick better, though? There were some visible imperfections on the chrome finish even after you let the paint dry for so long. Another tip that I have heard is that liquid chrome should be applied wet through an airbrush, with the surface of whatever you are air brushing getting visibly glossy from the paint building up. Apparently, the paint is self levelling and will dry to a smooth finish. Or you could go a completely different route and try out Green Stuff World Pure Metal Pigments. They are a dry pigment for mixing your own metallic paints, and those turn out super reflective. I think they might be better for mixing with resin than the liquid chrome since you don't have to worry about the paint medium messing up the way the resin cures. The "downside" is they only come in gold tones.

@Rybonator 2 жыл бұрын

Oh I might have to look into that varnish! Valejo makes quality stuff, so that could be exactly what I need. :)

@jherazob 2 жыл бұрын

The one i've heard works over this Liquid Chrome is that Alclad Klear Kote one

@ginacerulli524 2 жыл бұрын

I'd like to see you collab with NileRed and make literal mirror dice. I think it would look amazing in the clear shell.

@dalton344 2 жыл бұрын

You always figure out how to be innovative. It’s impressive.

@Rybonator 2 жыл бұрын

Thanks Ant! I try not to post the same techniques over and over, so it means a lot that you think that :)

@HoneyballLP 2 жыл бұрын

I would love to see them with mirror foil

@oceanbread9720 2 жыл бұрын

My friend came up with a cool idea for dice, so I figured I’d share the concept and see if it’s possible. So, what if you made a liquid core d20 but made it like a snow globe? It’s probably too late to make them before Christmas, but Rybonator is master of KZfaq algorithm and definitely knows when to release seasonal content! 😂

@erlandjohansen7195 2 жыл бұрын

Curious if Stuart Semple's "Mirror" paint is as good as he says, if so it'd be cool to see a comparison with this liquid chrome stuff

@Okoranasan 2 жыл бұрын

As an owner of 'Mirror', I can say pretty safely that it's probably about the same, quality-wise. It'll require about the same drying time, as both of them are solvents and will smear easily if not fully dried. Like Rybonator said, they're really just best with an airbrush, though Mirror's not bad with a paintbrush as long as you have a plastic one you don't mind throwing away. (No. You cannot get it out of paintbrushes, I've ruined several trying.)

@flyingteacup8369 2 жыл бұрын

The chrome dice look Awesome! Too be honest the sold black dice look really cool too.

@Rybonator 2 жыл бұрын

Thank you! And right? I was surprised at how nice just the black turned out.

@darthangeal4120 2 жыл бұрын

Yesssss! Return of the mirror paint. I love it.

@Rybonator 2 жыл бұрын

It's such good stuff, I had to!

@DiscoKittie 2 жыл бұрын

I'm not going to have my blank inserts for dice for a while, so I think you should try out silver leaf on the inside blanks and then cast them in a clear shell. It may just come out looking exactly same but then we'd know! Thanks for sharing!

@Rybonator 2 жыл бұрын

Hey it's worth a shot :)

@andychapman9956 2 жыл бұрын

It is looking less like a mirror and more like metal dice which is awesome as well i would love to see a set made to look like every type of metal, gold set, copper set etc

@Rybonator 2 жыл бұрын

Gold you say ;) I can do that

@arthybrids 2 жыл бұрын

it's quite common even if you use special industrial grade chrome lacquer with the clear coat they recommend that the reflections aren't as nice after the clear coat. had to do it once for work and it was let's say not fun^^ so I do think you got the best possible result and they still look awesome

@Rybonator 2 жыл бұрын

Thanks Art :D Glad to know I didn't mess up TOO much haha

@elihart5460 2 жыл бұрын

Although they didn't turn out the way you expected, they still look amazing! I love the look of metal dice, but don't like how destructive they can be on dice trays/tables/etc, so these would be a perfect fix for that!

@andrewwebb6270 2 жыл бұрын

I actually said "Those are super legible already" out loud before you mentioned making the decision to not ink them! These actually turned out really nice even if they aren't what you had hoped for! Also gonna add my obligatory request for a resin brand/type comparison! Not stopping until I get it.

@Rybonator 2 жыл бұрын

Great minds think alike! I will make that happen in the new year :) promise

@TheQuickAsAFlash 2 жыл бұрын

I love these! Even if they didn't turn out how you planned. :D TBH, as a crafter, I'm really curious how yarn or beads would work inside of one of these dice. Maybe even something knitting? I'd be willing to send you lace weight knitted inserts if you can't access them on your end. :O Like, something like a cubic right angle weave insert in d6's or peyote stitch 3d triangles? IDK, but I could send those, if you wanted lol.

@Rybonator 2 жыл бұрын

Oh I have seen a few examples of that on Instagram before :D YOu might be able to find what you are looking for there!

@generalpopeye4148 2 жыл бұрын

As somebody who does a lot of painting on plastic surfaces with shiny reflective metallic paints and kandy paint , surface prep is everything. Sanding the inserts with high grit sand paper before painting may help keep it more reflective, and once painted cover them with a box to keep dust off while the paint dries fully, but I don't really know. Just some thoughts I had. Seeing how the dice turned out is giving me ideas for some of my stuff.

@Rybonator 2 жыл бұрын

The inserts were already at a glass level reflectivity except for a single face that had slight excess resin on the edges. That's the only part I WOULD have sanded if I was gonna :/

@stephenthomas8312 2 жыл бұрын

Feels dirty since the missus is at work, but looks like another victory for me lol. But seriously, another nice looking set as always! *Insert gif of Squidward saying FUTURE*

@Rybonator 2 жыл бұрын

The Early Bird gets to brag to the missus :P

@stephenthomas8312 2 жыл бұрын

@@Rybonator exactly! Thanks for the great content as always!

@RadiantBleu 2 жыл бұрын

The black dice alone look so cool!! Tho they give me forbidden candy vibes

@Rybonator 2 жыл бұрын

Right? So secretive...

@Sootielove 2 жыл бұрын

These look really cool :D I love the imprisoned silver look to them. Being mirror-like would have been cool but they look great without it

@Rybonator 2 жыл бұрын

Thanks Sootie :) I'm happy with them, but my search for mirror will continue!

@msmalice 2 жыл бұрын

You could try nail chrome powders on the inner cubes, they're made to go under resin and look shiny like metal and come in ton of colors. You will need a clear no wipe gel topcoat to make the chrome work but a thin coat on the inner pieces should do the trick.

@Vhardamis 2 жыл бұрын

My favorite quote from this video: my scientific amount of pigment (dumps powder) that should do it. that made me lol today.

@Rybonator 2 жыл бұрын

Heh, I'm glad someone got a giggle out of it :)

@aramere3650 2 жыл бұрын

I’ve seen chroming once before, but it would take you a large amount of time. I think the way to go about it is spray multiple coats of the chrome and sand it smooth with ultra-high grit paper.

@Rybonator 2 жыл бұрын

The problem is you are essentially rubbing paint at that point :/

@HonestAuntyElle 2 жыл бұрын

@@Rybonator I think some better dust control could have done wonders as well.

@sarahburke6739 2 жыл бұрын

Shiny clicky clacks! I love them! It’s so wonderful! The sounds, the look, the everything! So perfect! You make wonderful dice!

@Kopa_Malphas Жыл бұрын

If you polished the surface of the black dice so they are smooth, and use a spray mirror finish, and maybe buff that out, if you're able to lay down an actual mirror finish on the dice instead of just what the air gun lays down, you may have a more reflective result.

@MikeKatsar 2 жыл бұрын

If you have any interest in trying something like this again, you should try hitting the liquid chrome painted portion with the finest two grits of Zona papers after they dry. I think just super lightly sanding down that layer might polish them to get rid of those fine imperfections you can see in the close-up shots. And an afterthough, maybe the same with a clear varnish airbrushed over top and sanded? Might keep whatever dulled them from happening again. Great work as always Rybo, keep it up!

@Rybonator 2 жыл бұрын

I would be affraid of just rubbing the paint right off the surface :O Thanks Michael :D

@Seelenschmiede 2 жыл бұрын

@@Rybonator there are small polishing brushs for the dremel. Maybe apply them softly to get it polished up and more shiny and then coating? Residues of the polish paste on the dice shouldn't be a problem for the resin.

@BiGuyJedi Жыл бұрын

Thanks for sticking it out, those drying times really are something.

@yokonamigaara 2 жыл бұрын

I wonder if it would enhance or detract from the final look having a little liquid glitter in the outer shell 🤔 either way this is a cool unique little set!

@hightde13 2 жыл бұрын

Very cool. About the only thing left to try would be to do a normal set with the black resin but first use the air brush to paint a good few coats of the chrome pen inside the mold before pouring the dice. You won't be able to polish them up much if at all but you may get that mirror look you are after.

@Rybonator 2 жыл бұрын

That might work, I can give it a shot some time :)

@meowm30wgaming64 2 жыл бұрын

"A very scientific amount of black pigment" *0.25 g of pigment later* "That should do it."

@CreepyADeepy 2 жыл бұрын

Just recently found your channel and just finished binge-watching all your dice videos. Was sad once it was over but quickly got excited with this upload! Thanks for the content my guy, might have to give this dice making thing a try

@glowfishin1 2 жыл бұрын

My favorite set so far! So pretty!

@KatTurnedBlue 2 жыл бұрын

the numbers look great. Love these dice.

@drawbyyourselve 2 жыл бұрын

The next step is actually getting a tollens reaction to coat your dice in elemental silver. I am sure Nile Red would collab with you on this one :D Basically use ammonium solution and silver nitrate to coat stuff in silver, but NEVER mix the nitrate until the start of the experiment, silver nitrate will form silver nitrite which can explode (hence my recommendation for a collab). I am not sure if the silver would form on plastic, but why not try? I guarantee the coating will be the most mirrorlike you can possibly get and is, in theory, even polishable. Now I cant say if the coating will oxidize or react to the resin and I don't think glass dice are a good idea, but the test tubes I still have fro, my chemistry experiments are still absolute silver/mirror like. Edit: this might be the only time I would suggest putting in gold xd

@isaacmoore2083 2 жыл бұрын

Tollens reaction is a great idea here, and I can confirm the Tollens reaction will produce a silver plating on plastic just as well as it will on any other surface. The silver coating also shouldn't oxidize or react with the resin, so it would be an excellent thing to try.

@drawbyyourselve 2 жыл бұрын

@@isaacmoore2083 that wasmy only doubt, lets hope rybo goes for it. Sadly I have no more wish spells and tollens can be a tad bit intimidating, due to the silver nitrite buildup

@xxPenjoxx 2 жыл бұрын

So happy to see more of the mirror paint, i love my molotov pens. You have the patience of a saint..2 weeks is insane... worth it though cos they turned out incredible. The matte black ones even looked great.

@SamGGreenberg 2 жыл бұрын

Fun. Thanks for the honest process notes.

@PhantomForge1963 2 жыл бұрын

Another way to get a great chrome look is by doing a VERY light dusting on a polished black surface- you'll be very surprised how far a little paint can go (definitely test on spoons or scrap first), and the shinier the black the more reflective the mirror finish. That's how prop studios paint "chrome" props like the mando helmet and terminator skulls-and that way you don't have to wait so long for it to dry, and it gives it a darker chrome ( you can keep dusting it to get it more and more silvery, but the more you do the less "chrome" you'll get and the more polished metal look you'll get.) Maybe that'll help it stay reflective after the resin, but a problem everyone runs into with painting props/objects with any chrome or metallic paint is that any clear protective spray (or resin, in this case) will usually dull the shine- not exactly sure why, but clear coats/resin pretty consistently dull the shine on chrome paint (unless it's a clear coat specifically made for chrome paint, which they make.)

@CaughtBetweenPages 2 жыл бұрын

So glad you kept going with this experiment!! These look amazing

@Rybonator 2 жыл бұрын

Thank you! I'm glad you like it, and that it turned out decent enough :)

@rh2219 2 жыл бұрын

These turned out great! Since they are resin dice that look like metal I wonder if it would be fun to create other illusion dice that look like they are made out of other materials

@drakerider7822 2 жыл бұрын

I just wanna thank you for being so thorough and inspirational in your videos! I had decided to get a friend of mine some dice in the color scheme of his patron, but couldn't find any that worked. Thankfully your videos gave me the courage and skills to re-ink the numbers of a normal set with Nail Polish and they look great! Thanks for being educational and encouraging us to try new things!

@moonlightwolf 2 жыл бұрын

The shell gives the dice a kinda trippy look. I love it!

@m_d1905 2 жыл бұрын

They do look good. Very attractive set.

@canovanas78 2 жыл бұрын

I agree that wet-sanding the black would help to enhance the reflective effects on the chrome. But that paint doesn’t break down into small enough particles to get that smooth surface. I tipically use alclad paint for this reason in airbrushes.

@roundishwhale 2 жыл бұрын

These are lovely! Painting the numbers could potentially have helped with "highlighting" how much the dice itself is reflecting^^

@stefinatorr 2 жыл бұрын

The black core dice remind me of the black oily stone made by the old ones in lovecraftian stories

@Rybonator 2 жыл бұрын

Oh you are so right! Major lovecraft vibes

@watermelonhelmet6854 2 жыл бұрын

Model painter here: A mirror finish is something that's almost impossible to get with paint. Alclad Chrome looks amazing, but it's so fragile that if you even look at it too hard you'll damage it, and any clearcoat you put over it always dulls down the reflectivity. Mirrors are mirrors because they they reflect close to 100% of the light that hits it, but are also completely flat.... so spraying what are essentially tiny metallic flakes onto something then covering it with any sort of protective layer is never going to leave that perfectly flat surface.

@JayFolipurba 2 жыл бұрын

really nice, so shiny and yeah, the numbers are legible. Awesome

@lukegoldstein 19 күн бұрын

Those came out really cool and I'm very quickly going to dive into those videos you mentioned on making the two-part molds. I just attempted my first set of resin dice this past weekend. They came out quite good for the very first attempt, but a number of lessons learned for sure.

@beaureynolds4267 2 жыл бұрын

There are some pretty expensive setups for the automotive industry to simulate chrome. Basically what you're doing black background with a mirroring finish. Culture Hustle (where you got the black ) has some good mirroring paint as well. The biggest drawback, as you eluded, is topcoating. Putting anything over the mirror effect to protect it dulls the shine. I like the way these turned out; I would roll them any day! Cool breakdown well done.

@adwilliams1987 2 жыл бұрын

I paint miniatures by hand only (no airbrush) and I always paint high gloss black first before any metal. I believe when they paint cars they do the same except gold they paint over glossy red. I would definitely keep making them black first in future trials!

@Rybonator 2 жыл бұрын

Thanks for the tip Stars :) Glad I got it right!

@Alpha13Wolf 2 жыл бұрын

Silver mirrors are also given a layer of gold or copper behind that silver. To counter that blue green color of glass, which resin wouldn’t need. Resin may need a blue metal layer to counter the yellowing as resin ages. Anyways, what I’m getting at is there are multiple layers of metal before they paint it with black or a dark pine green, to protect the metal layers and block light from passing through the mirror. Getting a really opaque black before the chrome and sealing the chrome first with a layer of UV resin to protect it’s shine during the curing of the regular resin may help greatly with the shine. Chrome though however is never suitable for anything but a finishing layer aa anything else on top would interfere with it’s appearance by dissolving some of it.

@JudyFrankenbutt 2 жыл бұрын

There are a couple types of clear coat sealers auto-model hobbyists have documented working to protect the liquid chrome from losing reflectivity over time--a forum I found mentioned "E7 chrome sealer" as an effective top coat.

@arcanacastsupportandchill9237 2 жыл бұрын

Yooo Rybo! A real good way to do this is with our blanks, and our silver dice wraps!! Theyre cut to fit our inserts, and give you this effect, but full mirror shine! Loved the video, my guy!!

@VentuKiel 2 жыл бұрын

Wooow, they turned out sooo well!! I'm in love w them 😍 I think it was a good decision to leave the numbers like that bc they can be read well. I must say I know there's some gold reflective paint that might fit w your style even more, but, hey, silver is cool too!! Keep it up, I love your dice!!! 🤩

@LavendelBrei 2 жыл бұрын

Another mirror option would be to use silver leaf over the black blanks which you can then really buff to a perfect mirror finish. Speaking of leafing, another cool trick to do with the shell molds would be to use copper leaf and then give it an aged patina with ammonia before shelling them.

@RogueRen 2 жыл бұрын

I would love for this to become a recurring series of new ideas to make the mirror dice better

@goldenboy82 2 жыл бұрын

Saw these dice on Instagram and HAD to watch the video immediately.

@themostobscure4 2 жыл бұрын

I'm so happy to see a Rybonator video show up in my recommended

@Verity_Reigns 2 жыл бұрын

Such cool dice! Even if they’re not perfectly reflective they look so good! For some reason they make me think of someone snagging a set of dice from the Chrome coated SpongeBob future.

@Rybonator 2 жыл бұрын

FUUUUUTUUUUURE :D 'Witness me!'

@lisaroper421 2 жыл бұрын

Sitting here with my cat purring on me and watching dice. Good times! I like the dice!

@Rybonator 2 жыл бұрын

Sounds like a wholesome day to me :) Tell your cat I said hi :p

@lisaroper421 2 жыл бұрын

@@Rybonator Well, I told him. But in typical cat fashion, he didn't have anything to send back 🤷‍♀️

@zreiser 2 жыл бұрын

I'd like to see you use metal leafing foil to wrap the inner dice with. There's a ton of cool colors, and a LOT of chrome/mirror finishes you could play with!

@laurentbondet210 2 жыл бұрын

Hi Rybonator ! More than a dice goblin, you're a dice genie ! You were right not to ink the dice. They look like brute pieces of polished chrome ! I have an aluminium die that's very similar, but less shiny . You rock, Rybonator ! Have a good day !

@stressedraccoon2589 2 жыл бұрын

IF you wanted to try this a thrid time theres a nail art pigment powder you could try though i beleive it can be kinda pricy and youd have to buy from an "indie" brand but i think its be worth a look see!! amazing work as always the dice are beautiful!!

@elenpena42564 2 жыл бұрын

They're so gorgeous! (But also, I would love to see you try that actual mirror idea)

@Rybonator 2 жыл бұрын

No u :) Also thank you haha. I can certainly give it a shot and see if it changes anything!

@livingoutloudly 2 жыл бұрын

The airbrush with the shell dice is just making me think of ombre airbrushed dice!

@technoraptor7778 2 жыл бұрын

Those really are unique and cool

@lwolfstar7618 2 жыл бұрын

Ooooohhhhhhhh shiny ³ XD Holy Chrome that gradient on the d10 looked soooooo good! A whole set like that would look amazing too!

@ardemus 2 жыл бұрын

I like those. If you want a true mirror the key is a very smooth surface. You'll want to sand/polish the black dice before painting them, apply several coats of paint knocking down bumps between coats, and then sand/polish the final paint surface to a mirror shine. You should be able to get an actual mirrored surface. I have thoughts on how I'd experiment with the materials and techniques but I'm not an expert and don't have specific experience polishing flat resin (I've done it with rounded acrylic using a Dremel and polishing compounds but that may not be a good approach for your project). I lean toward trying plate glass under a soft plastic film or paper to embed the polish, progressively higher grit polishing compounds, and a rotating figure 8 pattern moving the die on the glass. It's fine to use sand paper if you can get high enough grits, but it will clog quickly if you're too aggressive. Practice with a D6 to get the materials and techniques dialed in.

@yep1tsm3 2 жыл бұрын

I know there are plenty of pigments out there that are typically used for nail art. It's a powder that you buff on and then put on a top coat. Maybe that would work better, since nail polish is closer to resin?

@Tom-tn5rq 2 жыл бұрын

Whoa the dice look amazing! I like the chrome look of them! Also it would be cool to see yellow dice with a cheese pattern, that's something I haven't seen before, cheese dice :D

@MaxPowerCrafts 2 жыл бұрын

I love the experiment! One thing that might potentially have an impact OR Improve your results, are polishing your inner dice. They came out clean, but take them through your zona papers to a mirror shine, as smooth as you can possibly get them. Protect them from dust and debris and any other elements. There are some good comments on other chrome finishes, or potential application methods. But mirrors are perefectly smooth. So the more smooth and flat you get the better your chances I THINK based on knife making I do and hand sanding to mirror 3000 grit finishes. I love how your dice came out, I am hopeful for the next video too!

@alamander4444 2 жыл бұрын

Would have loved to see you try to polish one of the center pieces with some really fine grit AFTER painting... probably wouldn't have worked, but on the off chance it did, it might have made the final result more mirror-like! Now we will never know (unless... :) )

@Rybonator 2 жыл бұрын

I'll give it a shot on some throwaway resin. If it works, I'll post a vid! :)

@Zhainius 2 жыл бұрын

I love them!

@Emnms68 2 жыл бұрын

I would be very interested to see a version where you coat the inner dice with that metallic foil, in one piece as possible on each face so that no reflectiveness Is lost. It would be very tricky and require a lot of patience, but that’s the exact kind of project I always decide to take on myself; I just don’t have your supplies or skillset, so I leave it to you. Imagine a set of reflective gold dice! 😍

@rosejuliette9180 2 жыл бұрын

All this reflection makes me want to make a festive request. Tinsel Dice. Perfect for the holidays. I think some golden tinsel dice could look pretty nice.

@AlissaCytandorkyboxx 2 жыл бұрын

I'd love to see this redone with a patina style... 💚✨ I also wonder how well it would go if you mixed a small amount of Chrome pigment into the black and then buff a powder Chrome or airbrush the chrome on the inside on the mold. You could even try lightly buffing the outside of the dice with sandpaper and seeing the result that way!

@Kitsunekun2 2 жыл бұрын

I have an idea... Use the black resin... Put a little bit off color change powder on the insides of the inner die mold... Then when you make the outer die mold but some star shaped glitter in the resin. This will make starlight dice and the small amounts of powder will make it look like a nebula.

@gordonhartman1711 2 жыл бұрын

They do make kits to add mirror finishes, re did a faded mirror for a '62 chevy. These still look great 👍.

@Rybonator 2 жыл бұрын

Just to clarify as it seems that people have misunderstood - I didn't sand the inserts because they were ALREADY at a glass like polish. Only the edges of a single surface (the surface that touches the cap) would have excess resin, but the rest are fine. Sanding them further would have only led to the exact same result. So sanding the inserts any more wouldn't have done much to change the outcome :)

@Rybonator 2 жыл бұрын

Misunderstood - More like I explained myself poorly haha.

@StUCaboose 2 жыл бұрын

Gosh dilly darn it is the greatest thing I've heard on the internet today

@elizabethb.1346 2 жыл бұрын

I love that your work station looks like a crime scene now, after the "blood spatter" dice. XD

@amandapage5677 2 жыл бұрын

The only thing that I would say is sanding the insides of these dice might help with the smoothness, as the more smooth and even the surface is, the better the silver and that holds to the back of the glass to make a mirror; and the more accurate the mirror is.

@atelier_AG 2 жыл бұрын

Very cool! I think the reason for them not being as reflective as before is that you are looking at the surface of the clear resin, and not to the surface of the chrome. Even though it is see through, the surface reflects the light differently than the liquid chrome. I believe Alclad sells a chrome paint and a varnish that supposedly gives great results, but I don't know how good that would work on dice that you constantly throw around..

@kfogo7459 2 жыл бұрын

They look great! I always love the shell dice especially, just looks SO good and since i love shiny and sparkly stuff i'd magpie them if i saw them lying around :V haha. Yeah, the numbers are easy enough to read unpainted, but i was thinking that just a hint of black, like when weathering, in the edges and corners of the numbers could be cool, too

@subject_phoenix4043 2 жыл бұрын

Your voice helped me out my niblings to bed and for that this very tired soul thanks you! Also those still came out amazing!

@arenddenooij 2 жыл бұрын

Just a small thing, you could try getting your hands on a storm lighter! The heat is higher and more directional, should make it a lot easier to pop the bubbles!

@Rybonator 2 жыл бұрын

I might look into that :D Thanks Arend

@CypressJoker 2 жыл бұрын

Another method you might want to consider trying is using graphite powder - basically, you rub the powder into the surface of an object and it gives it a chrome effect. The problem with a lot of chrome paints is that theyre very fragile, and I wonder if the resin's curing process had a hand in reducing the reflectivity of these dice. Just a thought!

@MusesWhim 2 жыл бұрын

Sanding the black dice before air brushing them silver would probably give a better result. It's also possible that it would then be too smooth for the paint to stick, but it' worth a shot.

@nicholaschatham3432 2 жыл бұрын

adhesing foil to the inner dice and polishing it? found your stuff today and im loving it!

@GrinningFeline 2 жыл бұрын

Rybo, what if you zona paper sanded the inner flat dice before airbrushing? That would probably make them so smooth and shiny! Maybe you can even sand/buff the painted dice to get them super smooth before putting them in a shell?

@doglover1neo 2 жыл бұрын

I too also think that not sanding the inner dye before painting it was not the best choice. The dice are still amazing the way they are, but the goal was mirror not aluminum foil. The thing that helps make glass so reflective is because it's very smooth in one plain.

@SpeakingSpellSword 2 жыл бұрын

Only two possible improvements I can think of, though they might be slight- sand the inserts to a mirror finish, the chrome really highlighted every slight imperfection- then vacuum chamber the outer shell, even the slightest microscopic bubbles are going to create light distortions and mess with the shine for your mirror.

@CJBurgandy 2 жыл бұрын

you do a lot of cool dice, but honestly, these ones are my favorite so far.

@evelyn8102 2 жыл бұрын

Watched a couple of your vids now and youre like the dice/resin version of binging with babish

@eddvcr598 2 жыл бұрын

You can try using chrome powder for nails. They are super reflective, and come in different colors of chrome including holographic and dichromatic. There are a lot of YT videos on how to apply them.