The best untapped resources in the USA. The older folks who have common sense! Thank You Sir.

This guy is GREAT!!!!!!!!!!! I hope he's still around!

We need more people like this on KZfaq, could learn so much

Soak it up while you can. These older folks won't be around forever. This guy reminds me of my grandpa, I'd give 1000 of my days for 1more with him

Whichever kid gets to spend Christmas at this Grandpa's house is a lucky son of a gun

This old timer is a badass

My grandfather is a navy seebee from WW2 much respect sir thank you for your service

I bought a 3/4" hole punch from a craft store. I sit and watch TV and squeeze that punch knocking out cards from cereal boxes and just about any cardboard I have. Great video. Thanks for posting.

Very innovative and clever. Pay attention youth!…. There is a wealth of value in WISDOM!

Very Intelligent man Thank you for the Hint and Tips ... God Bless

This is a smart idea. Way easier even than using a hollow punch mounted in a vise and whacking them out with a rubber mallet. Thanks!

I use a 20 gauge brass, minus the plastic, with 4 slots filed in the exterior wall. Then slightly bend the 4 sections inward for clearance. I used 1/4-20 bolt, nut, lock washer hider. Chuck it in my drill press and away I go! Cheap. Effective etc. I couldn’t find my hole saw bit to copy his, but mine works ok too

Good job Buck. I did this too, but then I found a even better cutter. I use the metal cap on a shotgun shell. Make yourself a sizer at 3/4 inch and size down the shell cap. Heat the metal cap with a torch and pull off the plastic hull. Then use a machine screw and lock nut through the middle so you can put it into your drill press. Thin metal on the shell cap cuts real easy and never goes dull.

Instantly liked this guy.

I love it Buck!! Gonna make up several of these... I just picked up a drill press! Wade

Genius !! Simple, cheap and effective.

Great idea. I got some old hole saws that are wore out, now I can give them a new life. Thanks for the tip.👍

Great idea using the drill press. It has to be easier and faster and much cheaper too. In a contest, you would win "America's Grandpa" :)

Great tip. And thanks for your service.

I watched several videos tonight and was about to spend $40 on punches and supplies. I come across your video and WOW. I have old hole saws I can use. Thank you so much for your video.

thanks friend , this is very helpful...God bless...doug (Canada)

Big thumbs up. My father was a Sea Bee stationed in the Aleutians during WWII... Can do! I wasn’t smart enough so I joined the Marines instead.

Very helpful! Thank you! 👍

Yes sir there's truly more then one way to skin a cat.. Thanks from Florida

Great tip friend , just off to make one !!!!! Good hunting

You remind me of my Dad. God bless you sir. Very good video

Just thought I'd leave a comment. I saw this video a year ago and I made some with this method, they work great!

Thanks for the good ideas.

Cereal boxes, shoe boxes and all kinds of various cardboard packaging works too.

I use a 3/4" hole punch from Michaels for black powder shells, but this is genius! I was wondering about other materials for wads and spacers, and this sounds like the ticket.

See the older generation's use. Common sense and ingenuity. The result is good quality and a good feeling, unlike the newbies with good feelings/emotions and crappy results.

That is slick! I'm going to give that a try. Thank you for the video.

Great video sir. Thanks for sharing. I also liked the flip top vitamin bottle as a jar to keep them in. I use a couple of vitamins that have those lids and never thought about what to do with them.

Wow! Terrific advice! Thanks!

Great idea.. thank you for your contribution sir.

Thank you for the valuable information, buck. I’ll be trying this out for my 12 and 20 loads.

Awesome thanks for sharing

I like the idea of cork wads for black powder loads. Felt is generally recommended, so cork seems to be a good substitute.

Innovative, thank you for your video.

Yes Sir, you helped answer a lot for me. Thank you sir.

Thank you!

Awesome. Thank you!

thank you sir shared info is wonder thing.

got to be the seebee hat . Thanks for your service

I appreciate the tip.

I found a hole 🕳 punch block at harbor freight. It punches from 1/4 inch to 3/4 inch. The 3/4 works great in 12 gauge. Not as fast but in a few minutes I can have a lot of 3/4 overshot cards. And this punch set will punch metal as well for other projects. I use about any cardboard box I find.

Good idea. Thanks for sharing.

Excellent video

Thanks for that tip.great idea.

GREAT info. thank you.

your idea works great.

Old school reloader… great idea

Simple and Hope your still Kicking!

thank you !!!

Thanks, great idea

thank you so much for sharing

I made the same but I cut a slot in the side ,when the wad reaches the slot it is thrown out, so make a shield round the pillar drill.22mm cutter for 12g

I just getting ready to order some punches from Amazon while surfing KZfaq. Then you pop up with the best idea ! 👍👍👍

Hello there Buck, you have won a hammer made by 5 TONS W/GUNS! Thank you for your time please contact us soon.

Great tips.... how about replacement for the plastic wad?

I noticed he did not say what the diameter of the hole saw he used for 12 GA.

Can Do Seabee, good vid

I use a 20 gauge brass

Mr. Buck, can I reload 12 gauge ball slug using fiber wads only no plastic wads if so do you have a recipe.

Can Do MCB74

Unfortunately I don’t have a drill press. Bummer!

Can I buy a couple different sizes from you? You’ve got the method down pact.

Can I buy one of those for a 12 gauge?

What size do you use for 12 gauge over powder? The 3/4 is too small

What size do you for the 12gauge?

Does anyone have a link for the various sizes cork sheet pack? I’ve searched Amazon and cannot find it!

You can go to Michael's and get a 3/4" hole punch and use any card you can get your hands on, including your unwanted Xmas cards, cereal boxes, your ex-wife's photos! If you want to go REALLY cheaper than that, use sheep's wool or cotton balls and seal with melted candle wax.

Videoları Türkçe alt yazılı yapabilirmisiniz

I want