Making tip on and soft close drawers with Blum MOVENTO TIP-ON BLUMOTION hardware

Рет қаралды 29,520

Күн бұрын

Hi, This is BP from Sunridge Studio. In this video, I’ll show you how I made tip on and soft close drawers with Blum MOVENTO TIP-ON BLUMOTION hardware.
------
Key products used in this video
Blum MOVENTO 763H 12” runner:
www.woodworkerexpress.com/sli...
Blum MOVENTO standard locking device, Left:
www.woodworkerexpress.com/sli...
Blum MOVENTO standard locking device, Right:
www.woodworkerexpress.com/sli...
Blum MOVENTO TIP-ON S1 BLUMOTION unit:
www.woodworkerexpress.com/dra...
Blum MOVENTO TIP-ON synchronization rod:
www.woodworkerexpress.com/sli...
Blum #6 x 5/8" wood screw:
www.woodworkerexpress.com/blu...
Rockler drawer front installation clamps:
www.rockler.com/drawer-front-...
------
Video link
Making modern wall-mount bookshelf with Rakks system
• Making modern wall-mou...
------
Timestamps:
00:00 - Introduction
00:35 - Making drawer boxes
04:07 - Installing Blum hardwares
10:20 - Installing drawer front
11:21 - Final result
------
COME SAY HI!
Instagram: / sunridgestudio
Etsy: www.etsy.com/shop/sunridgestudio
------
My recording equipment & software
Camera: Sony ZV-1
www.bestbuy.com/site/combo/pr...
Tripod: Manfrotto Compact Action
www.bestbuy.com/site/manfrott...
Voiceover mic: TONOR
www.amazon.com/gp/product/B07...
Video editing software: Davinci Resolve
www.blackmagicdesign.com/prod...

Пікірлер: 16

@sawdustwoodchips 5 ай бұрын

Nice demo! Thankyou!

@djrajiisab 2 ай бұрын

You make it look so easy. Thanks for sharing! Where is the Tip-On in this demo?

@SunridgeStudio Ай бұрын

For tip on, see 4:37 of the video

@jpr0729 4 ай бұрын

when that domino didn't go in first shot "one of us! one of us!"

@TheotherAlexRodriguez 6 ай бұрын

Great video One of the best I’ve seen yet I have one question How much of a gap is left between cabinet face and drawer face back? Thanks in advance

@SunridgeStudio 6 ай бұрын

Thank you! If I remember correctly, it shall be 3mm. The manual of tip on device should specify this. This gap is needed for tip on mechanics to react and then push out the drawer.

@dsmnd5948 7 ай бұрын

nice explanation with demo. the problem is i have to pushing hard to close the drawer, possible to adjust?😊

@SunridgeStudio 7 ай бұрын

Thanks! That is the side effect of tip on function. If you put things into the drawer to make it heavier, it shall be easier to close. If the issue still exists, then you probably can choose a tip on device with lower weight rating. Blum tip on device has several different weight ratings.

@tariqbacchus Ай бұрын

does the tip-on mechanism also function as a latch? meaning; the drawer will stay closed even when pulling, tugging on it (or sliding open with weight)?

@SunridgeStudio Ай бұрын

tip on mechanism does not impact the pulling. The drawer can still be pulled out with a little bit of force, just like normal soft close drawers.

@mindaugasmangustas 3 ай бұрын

Hi . Great video . By the way what did you use for plywood finish ? Any wax oil or varnish ?

@SunridgeStudio 3 ай бұрын

Thank you! I used rubio monocoat.

@danthechippie4439 19 күн бұрын

@SunridgeStudio which rubio as there are so many

@bopang2008 18 күн бұрын

@@danthechippie4439 Rubio Monocoat Super White

@jesuseduardosolorioarguell6612 Жыл бұрын

Hi, have you ever installed this system but with drawers who are with interior front face?

@SunridgeStudio Жыл бұрын

Not sure if I understand your question correctly. Are you referring to inset drawer? If yes, then you can definitely do so. You just need to use different runner setback. From this link, you can find a Blum Movento tech doc. drive.google.com/file/d/1WFhM0YkrGr6xEyVpNiEfG7gxouEXsfNx/view?usp=sharing On page 24 & 25, you can find information about inset drawer and runner setback.