Making TRASH into TREASURE/SURFBOARD. Does it SURF? START to FINISH / plus SURFING in MARGARET RIVER

Рет қаралды 100,637

Күн бұрын

I up-cycle an old trashed blank and other bits and pieces that were destined for the rubbish tip into a new surfboard and then attempt to see if it will even surf.
The final dimensions came close to 5'4x21x ?
Big thanks to my mate Jacob for being the test pilot.
If you enjoyed the video please make sure to LIKE and SUBSCRIBE
Tell me what you think in the comments section.
Should I do more surfing videos?
All work and surfing is done in Margaret River , Western Australia.
Follow me at Instagram - @Shrednaught
Like my videos?
Shout me a beer - www.buymeacoffee.com/Shrednaught
0:00 Intro
0:45 Shaping
8:00 Glassing
14:08 Build outro
15:12 Surfing
23:06 Final thoughts

Пікірлер: 337

@samplesurfboards 2 жыл бұрын

Didn’t think about adding scrap rail foam to the blank. Looks sick 🤙🏽

@Shrednaught 2 жыл бұрын

It was a process that’s for sure haha

@jonimcgirr5403 2 жыл бұрын

Onya bro I've been upcycling boards here in Raglan NZ...cool idea reusing rail cutoffs I often struggle to maintain widths after removing old glass...the more we embrace this the better, Chur massive

@Shrednaught 2 жыл бұрын

Awesome stuff mate. Best way to keep them outta the garbage. Yew! 🤙

@stuartbrown3229 2 жыл бұрын

What about splitting down the middle and adding a strip of foam

@Shrednaught 2 жыл бұрын

Yeh that could definitely work.

@passatonvoisin 2 жыл бұрын

so much fun to watch, from start to ride. I always enjoy your build videos, but this Build+Surf combo is the best!

@Shrednaught 2 жыл бұрын

Yew! Thanks dude. I’ll try get more surfing in the future videos 🤙

@rustymac83 2 жыл бұрын

Love this recycle project, fantastic job.

@Shrednaught 2 жыл бұрын

Thanks mate 🤙

@glenmaden7077 2 жыл бұрын

I love that sand through look, and now I’ve seen how it’s done I might have to try it on my next one. Thanks for the vids man, they’re some of the better ones on here. 🤙🏼

@Shrednaught 2 жыл бұрын

Yeh I really like it. Give it a go 🤙

@mattdudecude5240 2 жыл бұрын

Great to see others saving old stuff and getting back into the game, nice work dude ✌🪖💙

@Shrednaught 2 жыл бұрын

🤙

@martipoch2571 2 жыл бұрын

The board look so sick !!! love the design !!! keep it that way super video

@Shrednaught 2 жыл бұрын

Yew! Cheers mate 🤙

@figueroapa1 2 жыл бұрын

Awesome video. Liked that you include the surfing!

@stefanwagner1869 2 жыл бұрын

I like the mixture of both the build and the surf of the build after 😎

@Shrednaught 2 жыл бұрын

I like it as well. Puts it all into perspective. Its a shame its so hard to find someone to film around here..

@gumbyforthewin3537 2 жыл бұрын

hell yea more surf footage, this was a perfect video

@Shrednaught 2 жыл бұрын

Thanks mate 🤘

@dixie121195 2 жыл бұрын

Enjoyed it all .. Thanks

@Shrednaught 2 жыл бұрын

Thanks for watching 🤙

@WEEBER13 Ай бұрын

So sick. LOVED IT ❤❤

@gafnidror 2 жыл бұрын

great work. i'm in the middle of doing a project like this and got here great tips. thx.

@Shrednaught 2 жыл бұрын

Awesome. Good luck 🤙

@jaysonhulbert1525 Ай бұрын

Mate that turned out SO nice!!!

@pablomadrid1735 Жыл бұрын

Thank you for this really interesting video. I love the de-stress look too.

@Shrednaught Жыл бұрын

Thanks mate 🤙

@salvadorgar8061 2 жыл бұрын

Pretty fun as usual!! nicely done mate!

@Shrednaught 2 жыл бұрын

Thanks man

@staffyjozi 2 жыл бұрын

Flip bru I love your work!!!! This stuck looks brilliant and a whole lot of fun!

@Shrednaught 2 жыл бұрын

Yew! Thanks mate 🤙

@seif1496 2 жыл бұрын

Love the different projects you're making. Keeping it interesting rather than building the same fish over and over

@Shrednaught 2 жыл бұрын

Thanks. Yeh I’ve been trying to think of new projects. Watching boards being built will eventually feel like watching re runs so I’ll try change it up as much as possible

@Rich2487 2 жыл бұрын

Love the look on that board. Never thought that leaving the cut laps would look so cool. Trashy style, yes sir! Excellent videos and boards.

@Shrednaught 2 жыл бұрын

Yew! Cheers 🤙

@jimmydm279 2 жыл бұрын

The surf footage was deff a nice touch to complete the board building journey man. Would love to watch more of it when possible for your future vids!

@Shrednaught 2 жыл бұрын

Thanks mate. I’ll definitely try get some more footage. Next time with a proper board 😅

@jimmydm279 2 жыл бұрын

Shrednaught Man the footage was super fun, loved the adventure. Thanks doing for what you do, learning heaps! 👊🤙

@Andy_XT 9 ай бұрын

Really nice work! Congrats!

@eddybobea6709 2 жыл бұрын

Durisimo. For the win. Seems like riding on a leaf, awesome rescue. Really nice surf progression, keep it up and thanks for sharing!

@Shrednaught 2 жыл бұрын

Thanks mate 🤙

@rafaelcoias6856 2 жыл бұрын

yeah man! more surf videos and more surfboars reviews! amazing videos. i watch you from portugal!

@Shrednaught 2 жыл бұрын

Yew! Thanks man 🤙

@chriszablocki2460 10 ай бұрын

Restoring stuff is cool. Especially restoring cool stuff. 🍻

@gustavososa5721 Жыл бұрын

Cuando hay amor por lo que se hace salen estas cosas, se nota el amor que le tienes a tu trabajo. Quedó una tabla de 💯💪💪, congratulletion!!!

@jonmerson2421 2 жыл бұрын

You're a great neighbor. Really enjoyed this.

@Shrednaught 2 жыл бұрын

Thanks mate. Instead of sugar we do surfboards 🤣

@blakewickens8373 2 жыл бұрын

your an absolute charger!!! respect

@Shrednaught 2 жыл бұрын

I’m pretty experienced at getting a good beat down haha 🤙

@thejackjournal6606 2 жыл бұрын

Dude this is rad! Unreal job. Love the vids 🔥🔥

@Shrednaught 2 жыл бұрын

Yew! Thanks man 🤙

@jowanpenhaligon3875 2 жыл бұрын

Sick video as always I love the sanded yellow and black finish

@Shrednaught 2 жыл бұрын

Thanks mate 🤙

@rosstruss Жыл бұрын

Top job bro, great idea sticking the offcuts on the old blank. Always entertaining and educational bro. Well done🤙

@Shrednaught Жыл бұрын

Thanks mate, appreciate it 🤙

@selwynrowe378 2 жыл бұрын

Another great video dude! Loved the bonus surfing footage, you always wonder how the finished board goes, shame FCS spoilt the party!!! One thing that would be really helpful is some info like how much resin you mixed for particular jobs etc. Loving your videos!!!

@Shrednaught 2 жыл бұрын

Thanks mate. The first surf was way too big anyways but I had to commit with the photographer there haha. For resin it changes from board to board and mostly it’s just an educated guess when I’m about to laminate. I think green light have a good chart you can reference

@Andrew-dm8mk 2 жыл бұрын

Thanks for new upload cheers 🔥👍

@Shrednaught 2 жыл бұрын

🤘

@Rogue_wave Жыл бұрын

So sick! You guys were ripping that thing, love the surfing footy. No idea you could use rail scraps like that. Might have to try this!

@omriv1662 2 жыл бұрын

I like you adding surfing video of your shapes board!!! Keep it more

@Shrednaught 2 жыл бұрын

Yew! Thanks man

@benjaminmaling9298 10 ай бұрын

Bro sick build, that sound track thou🤘

@aggigdynia 2 жыл бұрын

What a video, great shots and mood

@Shrednaught 2 жыл бұрын

Thanks 🤙

@aggigdynia 2 жыл бұрын

@@Shrednaught cheers 🤙

@mattfoley4128 Жыл бұрын

Awesome vid!!!

@Shrednaught Жыл бұрын

🤘

@christinejohnson451 2 жыл бұрын

Enjoyed the build, looked mad.

@Shrednaught 2 жыл бұрын

Yew! Thanks 🤙

@cilangkapdotcom Жыл бұрын

The best...love mate...from Indo.

@Shrednaught Жыл бұрын

Yew! Thanks mate 🤘

@michaelangelos5117 Жыл бұрын

That's as good of a way to waste time as any. I'm working on a surfboard I found in the trash, right now. Thanks for the tips.

@Shrednaught Жыл бұрын

Good luck mate 🤙

@lancemillward1912 Жыл бұрын

Sweet build

@Shrednaught Жыл бұрын

Thanks mate 🤙

@yazmut 2 жыл бұрын

legend surfing with floppy disc fins!

@Shrednaught 2 жыл бұрын

😅

@Surfmus 2 жыл бұрын

Nice. I restored/reshaped one that the PU foam/surfboard was in a swamp for a few years. Lots of work and lost a few hundreds dollars as well.

@Shrednaught 2 жыл бұрын

In a swamp is different!

@KawikaDowney 2 жыл бұрын

cool board and I like the resin tint.

@Shrednaught 2 жыл бұрын

Thanks mate 🤘

@ETYSURF Жыл бұрын

This was sick

@Shrednaught Жыл бұрын

Yew! Thanks 🤙

@SkipperSurfReview 2 жыл бұрын

Wow! Really enjoyed watching it!! I would blame likely the fins not the board in the first session. Keep up the great work💪🏼💪🏼💪🏼

@Shrednaught 2 жыл бұрын

Yew! Thanks mate 🤙

@barrelslayer 2 жыл бұрын

Nice work Lord! Sick seeing a shaping channel

@Shrednaught 2 жыл бұрын

Yew! Thanks mate 🤘

@xisotopex 2 жыл бұрын

nice little shooter

@clydehyatt9621 2 жыл бұрын

finding this channel was a blessing

@Shrednaught 2 жыл бұрын

Yew!

@maydhsh579 2 жыл бұрын

surfing footy was a great addition

@Shrednaught 2 жыл бұрын

Thank mate

@robertmckinley9109 Жыл бұрын

Epic brah 🖖

@Shrednaught Жыл бұрын

Yew 🤘

@anniebradley7405 Жыл бұрын

Legend

@stevenbush1651 2 жыл бұрын

Like your vids and appreciate the work you’re putting in. Ha ha! You’re not an “Influencer” yet is possibly why no answer from FCS. I think we all know Futures are a better system anyways🤟 Great to see the surfing too, particularly on something you’ve crafted. Power on with your quality product👍

@Shrednaught 2 жыл бұрын

Thanks mate 🤙 Yeh I’ve had a few bad experiences with fcs customer service before but this blows my mind. All I want to know is why ? Nothing was hit in the surf.. it just fell apart. I wasn’t chasing a freebie just an explanation I’m 100% a futures guy now..

@amoksurfboards4137 2 жыл бұрын

Great 👍 I definitely like the board testing clips...board looks great...but...yeah...guess it doesn't suit solid WA 😂 Good on you for giving it a go, looking forward to the next project

@Shrednaught 2 жыл бұрын

Thanks mate. Haha yeh think it needs to be slightly longer for those waves.

@ripeminds4149 2 жыл бұрын

Awesome video 🙌🏽

@Shrednaught 2 жыл бұрын

Yew!

@WaveWasters 2 жыл бұрын

Waves looks sick! Board might just need the right fins for that size of wave or it might be too big for it. Interested to hear what happened to the fin looks like when you delam or break a snowboard.

@Shrednaught 2 жыл бұрын

Definitely too big on my section. It’s definitely not made for big surf 😂

@WaveWasters 2 жыл бұрын

@@Shrednaught You never know till you try it though haha

@ZAGSurfboards 2 жыл бұрын

I did the whole head bobble as you wound down that road.. knowing that exact stretch well.. :P Good little vid mate.

@Shrednaught 2 жыл бұрын

Yew!

@smerd1 10 ай бұрын

Hello from the UK. Awesome job, just discovered your channel, liked and subbed 🤙

@Shrednaught 10 ай бұрын

Cheers mate 🍻

@jimcallaham1392 Жыл бұрын

good video.I like your shop and tools. I haven't shaped in 25 years. but watching this makes me think I would like to start again. too bad the board didn't go so well, maybe for another surfer it might shred

@Shrednaught Жыл бұрын

It’s like riding a bike mate. You’ll never forget, although maybe a bit rusty. Yeh the board was always going to be a dog. But I don’t mind wasting a bit of time to experiment and try keep some rubbish outta the landfill. 🤙

@thefilthygringo9228 2 жыл бұрын

I love the distressed look!

@Shrednaught 2 жыл бұрын

Yew 🤘

@stefanlie960 2 жыл бұрын

I really enjoy your vids and this one in particular, thanks! Widening the blank with off cuts was clever and the surfing footage is a great bonus. In general, I appreciate how generous you are with your tips, tricks and knowledge, thanks. Could you please do a flax (hemp) cloth lamination with epoxy? Perhaps over paulownia? I’m about to give that a go and there isn’t much information about the process out there. If not, no worries, just keep up the good work! 🤙🏼

@Shrednaught 2 жыл бұрын

I’ve never done flax but I really want to give it a try. I’ll see if I can wrangle some up 🤙

@stefanlie960 2 жыл бұрын

@@Shrednaught sounds good!

@darrelduke 2 жыл бұрын

cool vid.

@BendheimBoards 2 жыл бұрын

Nice project man. Curious about you rolling on the gloss coat instead of painting it on. Is it to avoid having to sand and Polish afterwards? And are you doing epoxy or poly resin?

@Shrednaught 2 жыл бұрын

Thanks man. That’s just an acrylic seal coat. No resin. I do it with both epoxy and poly. I’ll send ya some more detailed info on insta msg in a bit. This is secret sauce stuff! Haha

@samahasurfboards9333 2 жыл бұрын

I was wondering about that roll on coat too 😁 love the surf footage! More of that would be cool to see.

@Shrednaught 2 жыл бұрын

I’ll dm ya on Insta too mate 🤙

@MrRickyrecon 2 жыл бұрын

This was EPIC!!! So many cool ideas to save that blank from the bin! Love the channel 🙌

@Shrednaught 2 жыл бұрын

@@MrRickyrecon yew! Thanks

@gavinh1188 2 жыл бұрын

Nice project and great quality videos. It's interesting to see the build process. How about some repair videos? Help us to keep our boards in the water and not in the trash.

@Shrednaught 2 жыл бұрын

Got ya covered mate. Filming a ding repair video as we speak 🤘

@airplanyguy68 Жыл бұрын

Great job, really enjoyed the step by step process. I make rc planes out of foam and use a hotwire for a lot of cutting and shaping. Also wondering why you paint before glassing? Fascinating similarities and differences. Not a big fan of the rough finish, but hey, it's your call and it certainly makes me think along different lines. Do it the way that you enjoy!

@Shrednaught Жыл бұрын

Thanks mate. This was an experiment at best. I was hoping the paint would hide the hideous scars in the foam but it didn’t. So I went with a yellow tint and that also didn’t. So last resort I though fck it and made it look trashy. I mean it already did haha

@happydayz549 2 жыл бұрын

Great 👍thanks

@happydayz549 2 жыл бұрын

A guy with no arms surfing with a guy with no eyebrows ?!

@Shrednaught 2 жыл бұрын

Hahah it’s a straight up party out there 🎉

@enigmaticsurf269 2 жыл бұрын

nice!

@Shrednaught 2 жыл бұрын

🤙

@atichat5049 2 жыл бұрын

Nice

@jb-es5zj Жыл бұрын

ken would be proud

@angeloalves9039 2 жыл бұрын

awesome job m8, i really enjoy ur videos, the board came out looking sick. Athough your solo board builds are very complete i loved seeing the surfing part of this one. i know that is a looot of work to do the videos so the surfing films u can do rarely when u feel like it to spice things up ehehe keep it up🤙🏽

@Shrednaught 2 жыл бұрын

Thanks mate. Yeh I enjoy the surfing clips as it means I get to surf haha

@77pebble Жыл бұрын

Frankenstein looks like a FireWire volcanic seaside but in yellow. It don’t surf like a seaside even on the second attempt… it’s slow. Nice attempt at recycling that blank.

@mattsurfrecreio 2 жыл бұрын

nice video!

@Shrednaught 2 жыл бұрын

Cheers 🤙

@rolandbelcourt2536 2 жыл бұрын

turned an overripe surfboard into an overripe banana, love it!

@Shrednaught 2 жыл бұрын

Haha 🤙

@zssurfboards7138 2 жыл бұрын

This is so sick, Love that tron style finish! I've always installed my FCS2 boxes pre lam, do you think there's any benefit to doing them after? Also cant believe you have access to waves like that with no line up!

@Shrednaught 2 жыл бұрын

Yew! Thanks. The only real reason I do it post lam is because of the resin tint. If I can’t see the air around the boxes then sand it open when sanding it doesn’t look that clean.. not that looking clean was the effect with this board 🤣

@fabianodesouzafranca9949 2 жыл бұрын

Muito bom mesmo

@noamnissenboim 2 жыл бұрын

howsome work .

@Shrednaught 2 жыл бұрын

Thanks 🤘

@I.Nicoll-SeaCritts 2 жыл бұрын

Love it all. Board looks awesome, waves are awesome. Where in Marg's is that? Bloody great job. Tempted to give this a go. Great videos. Curious, where do you get your new blanks from? Keep the awesome vids coming.

@Shrednaught 2 жыл бұрын

Thanks mate. It was a bit of a dog but the neighbours kid enjoys it. Always worth having a go. I get my new blanks from colin Earle surf supplies and he gets them from burford.

@malmannz 2 жыл бұрын

Awesome vid on the process of this build! And the testing at end!..Lots of ideas, got a few oldies in my shed...What sort of glue did you use on the rippings to make board wider?...Blanks here in NZ are around 120-150$nz, so good to save a few $ while in covid times...Glue give u any issues while shaping? Many thanks great vids.

@Shrednaught 2 жыл бұрын

Thanks mate. I used gorilla glue although the wrong one, as it was all I could find. You want to use the brown honey type expanding poly one that gorilla glue make. It does dry slightly harder than the foam but you can still shape it. I’ve reshaped a bunch of old shapes so it’s definitely worth a crack.

@basigrapherplus 2 жыл бұрын

素晴らしいです^^ ありがとう

@user-gy6vh4cy5l Жыл бұрын

👍👍👍

@ryanbachand3274 Жыл бұрын

Love the music who is it. Cool project.

@garretdouglas4056 Жыл бұрын

Great effort. I found a broken longboard that I want to make into a mini Simmons. Is there a good method to peeling all the fiber glass off? Thinking of shallow cuts and pry with putty knife?

@Shrednaught Жыл бұрын

Thanks mate. It’s always better to try upcycle rather than just throw it out. To get the glass off you can use a dremel or jigsaw and cut very thinly along the rails. From there you can pry up. You will lose some foam so try to make sure the shape you’re attempting to get out of the broken board has enough space to allow for the lost foam. Good luck 🤙

@saylyakroman Жыл бұрын

awesome content! 🤙graphics is sick on that board! sorry to hear that they dont respond about snapped fin

@Shrednaught Жыл бұрын

Thanks mate 🤘

@levijonbriones3634 2 жыл бұрын

This is awesome! What spray can paint did you use? And can I use that on PU or eps boards?

@Shrednaught 2 жыл бұрын

That was a brand called anchor. You can use it on n PU but not eps

@TaranakiFrother-oy2dx Ай бұрын

Epic! What glue did you use to attach the extra foam on the rails? Epic paint finish! Did you roll over clear coat at the end? Sick. I was gonna comment that it looked like you fully lost a fin out there! 😀. You could notice it after the <a href="#" class="seekto" data-time="1020">17:00</a> min mark. You actually did pretty good with that kooked fin

@grantbudd124 Жыл бұрын

Great video and music. Inspired move glueing those rails on. Great to see someone glass a board and plugs the right way too. Shame it didn't turn out better. What happened re.FCS failure?

@Shrednaught Жыл бұрын

Thanks mate. It was an experiment so it was always going to be hit and miss. FCS basically told me it was my fault and I hit something ( when I know for a fact I didn’t ) so I told them to stuff it. The fin just blew apart under stress.

@grantbudd124 Жыл бұрын

@@Shrednaught I wonder if this has happened to other surfers? Companies will never admit fault to products.

@burster7571 2 жыл бұрын

super video as always I love the jokes and the fun you put into them. I just finshed my first board and your videos and addvice helped a lot so thank you very much. how long do you let the board cure before you do the cut lap?

@Shrednaught 2 жыл бұрын

Thanks mate. It depends on a lot of factors so generally I’ll give it a few hours and then test to see if it’s ready to cut. You don’t want to try to earlier as it’ll be too green. With 4oz you can even get away with doing it next day. It’s just the nose and tail overlaps that become too hard to cut

@ZAGSurfboards 2 жыл бұрын

As Shrednaught says.. next day even. Nose and tail where the glass overlaps, you can give a quick buzz down with a sander, to make cutting that area easier. (recent build i left it 2 days and did this.. works A-ok).

@burster7571 2 жыл бұрын

@@ZAGSurfboards thank you for the feed back as all this is a whole new world to me and I am on a huge learning curve.

@Pumaphi74 Жыл бұрын

Looks like a Ride warpig

@mariohuerta6188 Жыл бұрын

Nice job on Frankenstein board reconstruction. It might work better with Large amd uptight fins for more bite and drive.

@mariohuerta6188 Жыл бұрын

Upright fins

@Shrednaught Жыл бұрын

Yeh I never tried it with the upright style twins. I donated it to the neighbours kids so they can play around on it 🤙

@mariohuerta6188 Жыл бұрын

@@Shrednaught 🙌

@Cuisinenomade1 2 жыл бұрын

Hey thanks for sharing all your videos first of all. I have a board that needs a major repair and i want to strengthen. The board is not old but very light and fragile. It is already very thin so i think delaminating and reshapingis out of question but how do i fix all the little presure dents over the deck? Any thoughts?

@Shrednaught 2 жыл бұрын

Thanks for watching. Without seeing the board it’s hard to answer but if it’s just heel dents on the deck of the board your best to just leave them and surf. Next board ask for a stronger glass job on the deck. 6/4 is a good start for a normal board

@mrfelipehurtado 2 жыл бұрын

hey man would you mind showing or mentioning the products you use for the different processes? im getting into shaping and, besides the obvious laminating resins and tools and others,id love to know how you glued both blanks and what you used as a filler! thanks, the vids are sick!!!! thanks for the effort!

@Shrednaught 2 жыл бұрын

I definitely try to do that for future vids man. Thanks for watching. Yew!

@brianmccauley6545 2 жыл бұрын

What did you fill in the rail with on the deck. Looked like drywall mud.

@Shrednaught 2 жыл бұрын

Yup. Just everyday normal spackle

@julieandnickmoffatt998 2 жыл бұрын

I feel like we had a conversation about fin brands a few years ago.......... Done well mate. A lot of work but I'm sure it was fun.

@Shrednaught 2 жыл бұрын

Haha yeh no doubt. Sucker for punishment

@ZAGSurfboards 2 жыл бұрын

You couldn't convert Mitch to futures hey Nick? At least some of saw the light.. :P

@Shrednaught 2 жыл бұрын

I’m converted now I swear 😅

@ZAGSurfboards 2 жыл бұрын

@@Shrednaught hahaha about time.. After Nick showing me the error of my ways.. :P I do feel futures lead the way with variety of fin choice, and even the box design.. having the flanges front and back do help with preventing that box sinking (like fcs2 are prone to do). But when they do go.. they make a mess.

@Shrednaught 2 жыл бұрын

@@ZAGSurfboards yuh the fin choice is wayyy better. As is the customer service 🤣

@basefactor7862 2 жыл бұрын

Yo sick vid! About to make my first board... have you got any tips as to where to place the fin box in terms of how far up it is from the tail? planning to do a 7ft rounded pintail, with a single fin. Cheers

@Shrednaught 2 жыл бұрын

Thanks mate. Depends on the box size you’re using but a good range is anywhere between 6-8 inch up from tail. If you have the fin you can use that as a guide as well. What looks right to the eye generally works 🤙

@basefactor7862 2 жыл бұрын

Shrednaught right on dude thanks!

@Shrednaught 2 жыл бұрын

🤙

@slavickskromul281 2 жыл бұрын

Great work man, what kind of clear coat did you put on it?

@Shrednaught 2 жыл бұрын

Clear acrylic floor sealer 🤙

@cccccc54able 2 жыл бұрын

sick. is it necessary to glass it with yellow resin after spray painting it yellow? cheers

@Shrednaught 2 жыл бұрын

Na not at all man. I was attempting to get a full yellow so you couldn’t see all the stains and stuff on the blank.. but it didn’t work so I did the patina . If you want a real deep rich colour though doing a foam stain before the colour lam can help achieve that.

@leecooper8698 2 жыл бұрын

What kind of masking tape do you use for the cut lap? I've struggled to find a masking tape that sticks well to PU foam on the few glass jobs I've done. Great content by the way! Keep up the great work!

@Shrednaught 2 жыл бұрын

You definitely need to use the highest of quality tape. I use 3m 233+ and only that. There are a couple different types available depending on location but that is the standard needed 🤙 Also make sure all dust is off the blank before taping and push the tape down firm with the back of a razor. You should be sweet.

@leecooper8698 2 жыл бұрын

@@Shrednaught Thanks for the info! Looking forward to some clean lap lines 👌

@yh-yd8ku 2 жыл бұрын

Hello, I enjoy watching your videos every time. By the way, do you sell T-shirts with your logo or skull pattern?

@Shrednaught 2 жыл бұрын

Thanks 🤘 I don’t sell them yet but I am working on it. Stay tuned!

@lucvillemin Жыл бұрын

What kind of top coat do you apply at the end with a roll on and that gives such a cool looking matte finish? Is it Poly? Did you sand after that last top coat to get the matte finish? Cheers

@Shrednaught Жыл бұрын

Clear acrylic sealer. I just give it a light buff with 360+ grit to take the dust grit out and give it a matte finish