Making Wireless Power With Lego

Рет қаралды 19,304

Жыл бұрын

Patreon: www.patreon.com/user?u=122597865
See my latest experiments and behind-the-scenes footage!
In this video, you’ll learn how to make your own ‘baby tesla coil’ (also known as a slayer exciter) using Lego Technic. It's not quite the same as a traditional spark-gap Tesla Coil, but it approximates the fundamentals of a solid-state Tesla coil quite well. Using only a few simple (widely available) components like a transistor, an LED, a few resistors, and some wire, you can create your own versions. Who’d have thought you can use Lego to transmit power wirelessly?
I've tried where possible to build this high voltage slayer circuit using mostly Lego. Even the secondary coil tower and switch are made of Lego. This exciting electronics experiment allows you to do things like excite the gas in fluorescent tubes, making them glow - just by holding it in your hand near the tower! I think it's just so beautiful watching these bulbs light up wirelessly. There are many other fun energy tests you do with them too.
You don’t need to know much about electronics or circuits to get yours to work. And the circuit is very forgiving - you can use a wide variety of easy-to-find components, in a wide variety of configurations.
#lego #teslacoil #highvoltage #technic
In case you use amazon, here are some links to the components I used:
Breadboard
www.amazon.co.uk/AZDelivery-B...
Transistors
www.amazon.co.uk/CHANZON-BJT-...
Resistors
www.amazon.co.uk/Resistor-Tol...
LEDs
www.amazon.co.uk/dp/
Capacitors
www.amazon.co.uk/BOJACK-Capac...
30 Gauge Wire
www.amazon.co.uk/BNTECHGO-AWG...
12 Gauge Silicone Wire
www.amazon.co.uk/TUOFENG-Elec...

Пікірлер: 33

@dronko-fire-blaster Жыл бұрын

And you got a new sub, amazing channel you got here!!

@JamiesBrickJams Жыл бұрын

Really appreciate it 😁

@goldensniper4you Жыл бұрын

I love your videos of creative lego stuff

@JamiesBrickJams Жыл бұрын

Hey thanks, appreciate it 🙏

@autisticChronicles360 Жыл бұрын

1:18 Unless you happen to be Spencer Shay from iCarly. That dude be setting it on fire, lol. Jokes aside, neat design.

@JamiesBrickJams Жыл бұрын

Now that you mention it, there may be fire involved in a coming video ;)

@MoctorDac Жыл бұрын

I scrolled down to the comments to see if anyone was giggling about the censored feet like me, so I found it extremely funny that you mentioned iCarly. :^)

@JamiesBrickJams Жыл бұрын

@@MoctorDac 😂only recently heard about that whole fiasco

@greenphantom093 Ай бұрын

Where do you get it? The copper tape,wires,and the magnets.

@paltipa Жыл бұрын

Another great video! Keep them coming James! 👍

@JamiesBrickJams Жыл бұрын

Thanks Arman, working on the next one already!

@toni20k 7 ай бұрын

holy moly this is awesome! cant wait to see more videos like that!

@JamiesBrickJams 7 ай бұрын

Aw thanks a lot, appreciate it! 😁🙏

@dronko-fire-blaster Жыл бұрын

Cool, can this be scale-up easily I want to build one now!

@JamiesBrickJams Жыл бұрын

It sure can. Though you can actually make one MUCH more powerful, and also much smaller. That's my next video coming shortly 😉

@CPhillips88 Жыл бұрын

This is a fantastic video!

@JamiesBrickJams Жыл бұрын

Cheers Cameron, appreciate 😁

@Sean-Ax Жыл бұрын

8:11 an electric band? am I going crazy? lol

@JamiesBrickJams Жыл бұрын

Ha not crazy, I think I misspoke 😅

@Sean-Ax Жыл бұрын

@@JamiesBrickJams Yeah, I figure you meant to say "elastic band"; I'd make that kind of word slip too. lol

@trevorhaddox6884 Жыл бұрын

Instead of a 9V and a custom button, you could just use a standard PF battery pack. Also, what is the frequency you are using? 2N2222 is not that high of a frequency transistor IIRC.

@JamiesBrickJams Жыл бұрын

Damn now I'm kicking myself - using the PF battery pack would have been a much better idea! The frequency is self-drive, so it sort of depends on the setup.. but usually for a 2n2222 it oscillates around 1-2 MHz. Though I believe they can manage a max of around 200-250 MHz. It really doesn't like a lot of current though. Tends to get fried in about 15 seconds with voltages over 9v if current isn't limited. I've found you can sustain it much longer if you limit the current a lot though. Or use a heat sink. Might post some experiments there at some point

@random_ak_in_the_backyard 2 ай бұрын

Ur so underrated

@MeepMoop-ek3pb 12 күн бұрын

i have a idea you need to make a car motor pulller that can pull a car

@JamiesBrickJams 12 күн бұрын

Damn I like that idea 🤔

@01drain Жыл бұрын

hey, the circuit is say, the secondary coil top is going to ground and between a capacitor. can this part be skipped?

@JamiesBrickJams Жыл бұрын

Hey, if I understand correctly, yes you can skip it - the top load acts as the 'capacitor'. But most of my slayers don't even need a top load to work fine

@01drain Жыл бұрын

@@JamiesBrickJams oh okay, thanks❤️❤️

@JamiesBrickJams Жыл бұрын

@@01drain no problem, good luck!