Making Wood chipper mechanism [PLANS]

Рет қаралды 5,423,154

4 жыл бұрын

• Wood chipper & Log spl... - Wood chipper & Log splitter - BUILD
Some of you may remember that I've done similar machines before. The first one was not successful, and the second one I sold some time ago.
I decided to build a third version because such a device is always useful at a country house. I also have a lot of things that are needed to do wood chipper, so the whole project should not be expensive.
The housing is made of a steel flat bar 12 mm thick, making it very strong and stiff.
Large UCF208 bearings should also handle overloads without any problems.
The blades are sharpened at an angle of about 60 degrees. The material they are made of is so hard that I could only cut it with an angle grinder. You can forget about drilling in this.
All screws are hardness grade 8.8. For extra safety I put a spring washer under each screw.
The mechanism will most likely be driven by 3kW / 4Hp electric motor and transmission, which will reduce the rotation of the mechanism to 200 rpm.
The weight of the mechanism is about 34 kg / 75lbs
--------------------------------------------------------------------------
THE PLANS
for this mechanism (and all others) are available to all patrons who support our channel for $3 or more.
/ madeinpolandd
--------------------------------------------------------------------------
Some tools I use in my constructions:
Self made:
Belt grinder 2x48 - • DIY Belt Grinder 2x48"...
Vise - • Super Strong Hydraulic...
Drill press STAND with COOLANT SYSTEM -
• Drill press STAND with...
KEYWAY on the LATHE - • How to make KEYWAY on ...
and
Welder IDEAL Tecnomig 200GD
LATHE Cormak 330x770
Band saw Stiler BS 712R
Drill press ZX7016
Chop saw Evolution RAGE 3
Mag drill Evolution Evo Mag 28
--------------------------------------------------------------------------
Videos that you may like:
• Making Electric Alumin... - Electric Aluminum Foundry DIY
• Making MOTORIZED Plasm... - MOTORIZED Plasma Cutting Track
• Making simple Power Fi... - Simple Power File DIY
• Chain Saw HACK 7 - Dri... - Chain Saw HACK 7 - Drill Attachment
--------------------------------------------------------------------------
Social media:
FB: Made in Poland
Insta: made_inpoland
--------------------------------------------------------------------------
Music by KZfaq library :
Move out
New tires
Sailing
Memory Rain
Sour apples
Free fall
--------------------------------------------------------------------------

Пікірлер: 784

@MadeinPolandChannel 4 жыл бұрын

Hi everyone :) In this video I showed how to made a "heart" of wood chipper. In the next video (if everything goes well) I will show you how to do the rest and describe what and how I will do the drive system, etc. If you have any questions, please check the video description first. There is a lot of information and maybe you will find there an answer :)

@mmichniel12 4 жыл бұрын

Jaka jest maksymalna grubość gałezi? Bo wyadje sie mało z 5 cm na oko.

@leopeter9051 4 жыл бұрын

I feel like you might have made the blades to long. You will need a lot of torque. But im just guessing.

@bingbing-ti2rv 4 жыл бұрын

You shown* not showed ;)

@andrewrasputnyi5249 4 жыл бұрын

Hi, Man! Nice video you have made. Could you please give a link where I can find metal square you were using at the beginning of the video. Thank you! You are doing a great job! Keep doing ;-)

@aliyasmine500 4 жыл бұрын

لانمكطفاتننقلتنمظ

@patrix2358 4 жыл бұрын

Obserwuje kanał od dawna jestem ślusarz/spawacz jeszcze nie bo jeszcze szkoła jest ale już prawie i twoje filmy w jakimś tam stopniu motywują mnie aby zrobić warsztat koło domu i coś tak sobie robić jak ty, pozdrawiam

@artwithdad5131 2 жыл бұрын

Polish people are very nice and so are their products. I really liked the chipper you made, thank you very much for sharing.

@jonlund3161 4 жыл бұрын

The best woodchipper build video I have seen! And I have seen a lot of them.

@phi376 4 жыл бұрын

Cutting that keyway in the shaft was an amazing technique!! Nice work.

@tkskagen 4 жыл бұрын

That thing is a FREAKIN' MONSTER! 🙀

@alfredovaldes8090 4 жыл бұрын

Znowu zaskakuje mnie jakość jego opracowania. Dziękuję I oczywiście sprawia, że jest to praktyczne i zrozumiałe. Gratulacje, Mistrzu! ! !

@RANDALLOLOGY 4 жыл бұрын

That build is heavy duty. Can't wait for the rest of the build. Great job.

@Marcinlog 4 жыл бұрын

Aż miło się ogląda . Profesjonalne podejście i ładne wykonanie

@Uswesi1527 6 ай бұрын

The Master Craftsman demonstrated his knowledge, professionalism, skills, experience. Measuring, cutting, and assembling is perfect, precision, rare engineering. Thanks

@user-pw7fn1lz6l 4 жыл бұрын

Pozdrawiam Jak zawsze ciekawa i wysokiej jakości robota. Nie mogę się doczekać kontynuacji. Powodzenia.

@bigsuperpower 4 жыл бұрын

Man Video like this just make me go out side and build stuff !!!!! Wonderful Build Thanks for Sharing it !!!!

@nickmo439 4 жыл бұрын

Milling a slot on a lathe - awesome!

@WorldsOkayestWelder 3 жыл бұрын

Such a good day when you got the idea to build something and Made In Poland has already made a video on it! Thanks for the awesome content!

@ardysmith9987 4 жыл бұрын

Great work your a true craftsman. Thank you

@Tarasv84 4 жыл бұрын

Отличный мастер! Приятно посмотреть! Удачи в работе!

@ivobass01 4 жыл бұрын

Espetáculo. Aguardando continuação... 👏👏

@AquaPeet 4 жыл бұрын

You have great tools, great material AND great skill. You can build ANYTHING you design on paper! Super awesome!

@OKSZAelectric 4 жыл бұрын

A miałem mieć wolne... Zaczynam robić rębak 😜. Dzięki za inspiracje.

@vmoutsop 4 жыл бұрын

Holy Crap! That is one Nasty, Gruesome, Violent, Dangerous and Awesome looking machine. I can't wait to see what it does when it's done! 👍

@dieterbuchner3420 4 жыл бұрын

My words.

@erikjohansson1814 4 жыл бұрын

It will chip wood.

@vmoutsop 4 жыл бұрын

Yes I know but what I mean is I can’t wait to see the destruction when it chips some wood. Hopefully that will be displayed

@dimasbka 4 жыл бұрын

I saw a similar device in the movie "Tucker and Dale vs Evil" - It is completely safe :)

@niklar55 4 жыл бұрын

If you angled the two side plates at the top, @ 45 deg, giving part octagon shape, you would use less material for the top plate, and there would be no corners to hold debris. Also, a flat wedge shaped plate pointing outwards, at the entry to the blades, would give an edge for the blades to cut against, like a guillotine, which may improve efficiency. I liked the project, and the construction.

@weldweld5629 4 жыл бұрын

👍👍. Would Love to see a hydraulic wood splitter build.

@skeets6060 4 жыл бұрын

An outstanding garage build !

@jlewik 3 жыл бұрын

Zupełnie nie rozumiem ludzi, którzy pod tym filmem dali łapkę w dół. Chyba z czystej zawiści i z zazdrości.

@zbigniewbalczunas4438 Жыл бұрын

tacy ludzie jak Ty podnoszą naszą wartość jako Polaków , brawo Ty !!!!!! Super robota !

@user-bk7em9ef4e 4 жыл бұрын

علي الرغم من انني لم استفيد شى من صنع الكسارة الا ان مشاهدة قناتك ممتعة للغاية عمل رائع حقا تستحق المشاهدة بامكانك تطوير الافكار وستجد يدك تعمل تلقائيا

@supernatureza 4 жыл бұрын

Good....good...good💕💕💕 Muito bom seu trabalho... Adoro esse canal com tutorial... Uma forrageira....muito boa .... Sucesss

@Rustinox 4 жыл бұрын

Your system of workholding for milling slots on the lathe is brilliant. Thanks for sharing.

@MCsCreations 4 жыл бұрын

Fantastic job, dude! 😃 It's getting... Scary! 😳

@piotryczek9114 2 жыл бұрын

ZŁOTA RĄCZKA !!! każdy by tak powiedział - ale do tego trzeba mieć zamiłowanie i kochać to co się robi a wtedy SUKCES jest murowany !!! Pozdrawiam i życzę dalszych ciekawych pomysłów , których już jestem ciekaw ;)

@kamilkamil8721 4 жыл бұрын

progres narzędziowy niesamowity oby tak dalej pozdrawiam !

@buczo102 4 жыл бұрын

Przydała by się jakaś aktualizacja Warsztatu. Jakiś shop-tour ;)

@rickpalechuk4411 4 жыл бұрын

That thing is metal death! Can't wait to see the rest. Cheers

@AtelierulDinGaraj 10 ай бұрын

I follow your plans, damn, 5 hrs to make axle with drilling holes and tap, 5 hrs to sharpen the blade, 2 hrs to make screws holes, and put them in order, 2 days in building the base, 2 hrs to drill that ,70 mm holes for ax, so on so on...a lot of hard working

@BoberBydlo 4 жыл бұрын

Świetny kanał! Witam z Białorusi!

@xander51371 4 жыл бұрын

nice skills...i could watch this a whole day

@nowheremanjk8624 4 жыл бұрын

Pomalować na różowo, będzie super niedorzecznie ;-)

@ppmcevoy1895 4 жыл бұрын

Cool Engineering, Man 👨‍🏭

@edsoncleto8757 3 жыл бұрын

Observo que a fixação das facas estão favoráveis ao sentido de corte, mas mesmo assim não é perigoso escapar e ferir o operador? Parabéns! Muito bom! "Brasil." Aguardo seu retorno, por favor.

@firstmkb 3 жыл бұрын

Very impressive build, and I loved your technique for making a key way on a lathe.

@danieli8079 4 жыл бұрын

Wenderful! and 100000000000... Like! from Romănia!

@ZdarovA_ZamonaL 4 жыл бұрын

Хороший гаражный мастер, оборудование на высоком уровне. Умение работать на нем отличное. Отлично, спасибо за видео.

@user-uo8du3vp2u 3 жыл бұрын

почету сразу высокий-нож криво прорезал.станом-труборез надо.и просверлить пластины надо.

@cokhichetao72 3 жыл бұрын

You are such a master, low-skilled like I cannot do like you, admire!

@Zogg1281 4 жыл бұрын

That is going to be a seriously scarry piece of machinery!!!! I think "Anything Chipper" might be a better name for it! I love it already LOL 🙂👍👍👍👍

@robertgilmour1903 4 жыл бұрын

Really enjoyed this make.

@jarokowalski3355 4 жыл бұрын

Masz wielki talent i robisz piękne rzeczy.

@Stiven986 4 жыл бұрын

Slowmotiony sie pojawiaja ;) zacnie zacnie nie tylko sama praca ale i podjescie do montażu zajebiste ;) pozdroo ;) ;)

@user-hx2fz7ce6w Жыл бұрын

Даже смотреть одно удовольствие,золотые руки и блестящий интеллект.

@tanganikauzacnego5415 4 жыл бұрын

Jestem pełen podziwu dla ciebie zacna robota 😀

@PANRADZIK76 4 жыл бұрын

Lubię te klimaty.Bez najmniejszej , mini tokarki nie podchodź to tematu.Każdy Kowalski podejdzie do filmu i wypowie sobie w duszy ,przecież to prawie każdy to zrobi..ale są momenty po co to ??? dla SATYSFAKCJI!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :-)

@mr.maskot1969 4 жыл бұрын

Its a master piece, beautiful

@guidomarrucci773 3 ай бұрын

You have golden hands👏👏👏👏👏FROM🇮🇪

@samdee9337 3 жыл бұрын

Masz szalone umiejętności mój przyjacielu. Świetna robota.

@fakomaksi2400 4 жыл бұрын

Adaptacja tokarki na frezarke genialna, kradne ten pomysł, nie widzialem nigdy wcześniej

@johnlloyd8000 4 жыл бұрын

Very intriguing build! I hope those blades don’t slip off at full rpm! Some elongated holes instead of open slots might be a good idea

@MadeinPolandChannel 4 жыл бұрын

It will be powered by a gear motor that will give me 200 rpm. The same speed will be in the mechanism and everything will be connected with v-belts. Even if something happens, the speed will be low that the blades will stay inside and the belts will start to slide. I've already made a few wood chippers, so I think I know what I'm doing :)

@gordon6029 4 жыл бұрын

Made in Poland Still scares me but you are the professional:)

@victorgonzalez1564 2 жыл бұрын

Felicidades maestro por su gusto musical, la letra...pura poesía!

@maszyny-recykling1503 4 жыл бұрын

Super wielki szacun za robotę ja osobiście używam łożysk SNR pozdrawiam

@georgepamfilis2983 4 жыл бұрын

Great video! you should redesign the blades though to have slots so you reduce the change of them sliping out due to centripal force. Simply put, to not cut your self in half.

@Salnik-zt3fv 4 жыл бұрын

Отличная работа! Все на высшем уровне, как по механике, так и сама съемка. Привет из России! Great job! Everything is at the highest level, both in mechanics and the shooting itself. Greetings from Russia!

@maciekgucma4756 4 жыл бұрын

Super pomysł i wykonanie!

@user-xl6hb7tl3i 3 жыл бұрын

Ты воще молодец мужик, золотые руки, и инструменты хорошие, удачи тебе👍

@damian6101 Жыл бұрын

Oglądam co jakiś czas Twoje filmy. Jesteś nie niemożliwy :)

@AlexiDiakov 4 жыл бұрын

Hey @Made in Poland. You know how to make a video on DIY beautiful and interesting. Continue like this. Hello from France

@axelramm 4 жыл бұрын

dokonalé, krásna dielňa a vybavenie.

@Psevdoigrok 4 жыл бұрын

Восторг от просмотра! Просто класс!

@user-sv4iq1km6z 4 жыл бұрын

楽しみにしてます！(I am looking forward to it)

@danielramirezcruz.2209 4 жыл бұрын

Super work I love it I need that tool.. super trabajo me encanta yo nesecito esa herramienta ... gracias thxs...

@diaashamiyi5456 2 жыл бұрын

I really envy you sir for such good tools you own. I wish i could have some like u in the future because its my hobby to create such things. But in my country it costs too much

@bichonielectrico1662 4 жыл бұрын

Quiero felicitarlo por su excelente trabajo todo esta a otro nivel necesita 100 RPM mas

@arailtondesouza2045 4 жыл бұрын

amazing job, like always.

@josephsadowski4532 4 жыл бұрын

You did a wonderful Job I am impressed, Thank You for the help, God Bless!

@larryschweitzer4904 2 жыл бұрын

Nice work. If you hold the steel plate at an angle on the bandsaw it will cut faster and be easier on the blades.

@matthewcalder4351 4 жыл бұрын

Skills! Skills, Skills! I watch on in ore!

@blblblbl111 4 жыл бұрын

Чем толще лист стали - тем красивее видео :)

@tfildaed 4 жыл бұрын

Awesome work and design!

@ozix96 4 жыл бұрын

Dopiero teraz odkryłem Twój kanał, jestem pod wrażeniem. Mało Polaków na yt może się poszczycić zagranicznymi widzami i to w takiej ilości... Rób dalej co robisz i polecam też robić filmy z odrestaurowania czegoś. Też bardzo ciekawie to się ogląda i oglądalność też nie mała. Pozdrawiam i życzę dalszych sukcesów :)

@krystianmikua1367 Жыл бұрын

Witam na interesujący materiał i wartościowy widz się zawsze znajdzie Pozdrawiam konstruktora

@kayludwig827 4 жыл бұрын

Sehr schön anzuschauen. Das ist noch richtige handwerkskunst. 👍🏻💪🏻

@stephenkeefer3436 4 жыл бұрын

Nice clean work! Good job !!

@WorkshopFromScratch 4 жыл бұрын

Genialne rozwiązanie! Wykonanie jak zawsze na wysokim poziomie. Czekam na kolejną część 😀

@MadeinPolandChannel 4 жыл бұрын

dziękuję, dziękuję :D

@user-kr1jh1wi4w 4 жыл бұрын

Cool work 👍👏

@tomaszgrzankowski8051 4 жыл бұрын

Fajna sprawa. Do zrobienia noży użyć można stali resorowej. Ja kiedyś podobne noże wykonywałem z resora od wagonu kolejowego, albo od ciężarówki.

@00BillieTurf00 4 жыл бұрын

woooooow, impressive!, Dziękuję Ci!

@user-ui9js2io8d 4 жыл бұрын

Ребята, у вас руки, золотые +++++++ !

@lagledavid4353 4 жыл бұрын

Big hiya from Pennsylvania USA. You have skills. 😷

@user-vz8hh9nz1k Жыл бұрын

Мені сподобалось, крута штука та класно зробив! 👍

@user-db1ht5rs6l 4 жыл бұрын

Молодчина,золотые руки!!!

@Pats-Shed 4 жыл бұрын

Great build so far. Would it be possible to cut the slots in the blades with an end mill in the lathe , and the blade clamped vertically to the tool post?

@alexanderlytkinson 4 жыл бұрын

with great pleasure watching your videos. your inventions are simply amazing. Sometimes it seems to me that if you have the necessary machines and tools and a lot of free time, then you will be able to build a rocket in the backyard.

@netosima5379 3 жыл бұрын

Show perfeito belo trabalho

@SekAustria 4 жыл бұрын

very cool man.

@solvertutor68 3 жыл бұрын

Felicitaciones por su gran trabajo!!!!. Me parece que el diseño de las cuchillas no considera el gran esfuerzo sobre el eje que pudiera romperlas.

@RubenKelevra 4 жыл бұрын

Have you experienced any issues with working for a long time? I guess this cutter could run hot enough to hit itself because the blade expand 🤔 I think two blades from top and bottom overlapping 1 cm but have a space between them could fix this potential flaw.

@jlm0rr1s 4 жыл бұрын

Waiting on that next vid👍

@faktotumtutopiacom 4 жыл бұрын

fine video and beautiful tools!!! Question: With a rotation speed of 200 rpm do you have remarcable vibrations caused by lack of balance of masses?

@albertoyunes 4 жыл бұрын

va muy bien, se ve sólida y fuerte. ya la quiero ver funcionando. Saludos desde México

@jerardmartinhernan4868 4 жыл бұрын

y que pieza es o para k es???

@BrilliantDesignOnline 4 жыл бұрын

I have purchased the same carbide side scriber at 0:18, and it is an EXCELLENT tool. Very dangerous machine you build :-) And built so well!

@rebeccaperion7740 4 жыл бұрын

Where did you buy it? I want to purchase one either.

@BrilliantDesignOnline 4 жыл бұрын

@@rebeccaperion7740 Aliexpress $11

@mealex303 4 жыл бұрын

Awesome 😊

@AlbiesProductsOnline 4 жыл бұрын

Does the steel you are using for blades have enough carbon to be able to harden maybe take 2 off cuts and heat them until they are no longer magnetic then quench 1 in oil and 1 in water then put one end in your vice and try to bend if they brake not bend then harden and temper your blades