Makita 1650w 2704N - UNBOXIND and First IMPRESION ! An honest OPINION!

Рет қаралды 18,411

Күн бұрын

Makita 2704N table saw
7 Smart ideea for oyur Garage : • 7 Amazing Ideas To Mak...
From the opening to the first test I was deeply impressed by this truly professional table saw !
In the product description and manual it appears that it can cut up to a maximum of 93mm but in reality the cutting blade of only 260mm can easily cut over 95mm. It's amazing when the vast majority of products on the market, even those that are 5 times more expensive, can't cut even 90mm.
For me, the Makita 165w 2704N is the perfect model and will meet all my plans!
I've been looking for a cutting table for weeks, but it seems that this not only convinced me but also impressed me a lot with the protection systems it has!
Table circular saw with large work table made of die-cast aluminum. Soft start-up. Anti-restart function. Workbench can be extended to the right and rear via telescopic extension.
Makita 2704N table circular saw 260/93 mm
A very accurate table saw from Makita. 2704N table circular saw is efficient with a 1650W motor and revolutions of 4800 min-1 for professional use! The saw also has a robust guide rail at the front and rear.
The maximum saving depth is 93 mm at an angle of 90 degrees and 64 mm at an angle of 45 degrees. The maximum cutting width is 65 cm.
Other user advantages are the soft start-up of the saw and the work table, which can be extended to the right and back via telescopic pull-outs.
Included in the purchase is also an HM blade, parallel stop, angle stop and feed pin. The chassis is not included.
TIMESTAMPS:
00:00 - Introduction
00:30 - Unboxing
02:00 - First impresion
02:30 - Continue the Unboxing
03:30 - Original Makita Blade Presentation
04:00 - Makita 2704N presentation after Unboxing
06:30 - Install the other parts for Makita
11:45 - Install the original Makita Blade
14:50 - Testing the functions of the Makita 2704N table
18:25 - Plug in and run for the first time
20:09 - First impresion after the first cut
21:20 - Harder wood testing
23:33 - PAL wood testing
25:00 - Measuring the possibility of deep cutting
29:00 - Final opinion and conclusion
#Makita2704N #MakitaTableSaw #Makita
Revolutions: 5200 min⁻¹
Max. cutting height at 90 °: 93 mm
Max. cutting height at 45 °: 64 mm
Max. Tilt V / H: 45 °
Connection cable: 2.5 m
Side table: 1
Feed pin: yes
Blade: 260x30, Z24 mm
Max. capacity (HxW): 753 x 665 mm
Dimensions (LxWxH): 715 x 753 x 483 mm
SUBSCRIBE to the channel:
kzfaq.info?...
You can also follow us on the other social channels:
FaceBook: / flyhigh2202
Instagram: / fly.high2202
TikTok: / flyhigh2202
Discord: / discord

Пікірлер: 30

@freespeech2261 Жыл бұрын

Never use the fence and the sliding mitre at the same time

@hansbin3782 2 ай бұрын

Very helpful, thank you

@martinwilliams9098 Жыл бұрын

Excellent video ,very helpful to me for sure thanks you

@menesfrancois 2 жыл бұрын

hey there ! thank you for the really nice video ! I would just like to add a small tip since you said it's one of your first machines for wood. I'm buying this machine as well and I'm not sure if it's included but even if not it would be very easy to make one with the machine itself : if you cut without holding the "off cut" (the right part) you should have something to create a space between the part and your fence (usually a small block between the fence and your material) to avoid the kickback and eventually getting the off cut thrown back at you (which can sometimes hurt !). also when your hand is closer than 4-5 cm from the blade use that black plastic to push it. you should have one for forward pressure and one for lateral pressure just in case ! thank you for the video !

@flyhigh2202 2 жыл бұрын

Thank you very much for these words! It seems that the side part already comes with this I probably omitted to present, that it can be set depending on what we cut if it is long or short it can be moved and adjusted to your liking ... I will come back with a video in which I will present more this and other details that I am extremely excited about this machine that I use weekly for various projects.

@AG-gs7sp Жыл бұрын

Thanks for the vid!

@nicholaslloyd2829 2 жыл бұрын

Hi I was impressed with your vid on the saw I have ordered myself the same saw . Keep up with your work I will be watching you in the future 😎👍Nick

@flyhigh2202 2 жыл бұрын

Thank you very much for this message! I am delighted with the opinions of the followers! I will definitely make more videos about this cutting board because after using it I am more impressed! 😊

@hubhubble 2 жыл бұрын

You should use the push stick that is supplied with the saw.😄😄😄

@flyhigh2202 2 жыл бұрын

Thank you for the advice ! That's what I do now ... at first, for the first use, since it's my first cutting table, I didn't even know much about it. But today I can say that I am extremely satisfied and delighted with its quality.

@K.N.A.C.K.E.R.S.1 2 жыл бұрын

fantastic video , i have been looking at this machine myself. after seeing you use it straight out of the box like that i was impressed, off to the shops tomorrow and try to find one. thanks again

@flyhigh2202 2 жыл бұрын

Thank you so much for this comment! The opinion of my followers helps me a lot!

@nicholaslloyd2829 2 жыл бұрын

Your English is good and you’re video is great.👍

@flyhigh2202 2 жыл бұрын

Thank you very much for these words! It matters a lot to me that I am at the beginning of the road without experience!

@stefanipcar85 Жыл бұрын

Bravo. Ești tare

@flyhigh2202 Жыл бұрын

Multumesc mult ! 🤗

@awaisbutt42 2 жыл бұрын

Makita 2704 and Makita 2704 n both are the same or have any change between the two thank you??

@flyhigh2202 2 жыл бұрын

There doesn't seem to be a difference between them but I think the 2704N is an upgrade but I can't find the 2704 model in my country so I can compare them. I am extremely excited about this table more than I can expect considering that a 260mm blade can actually cut over 100mm!

@mjmjmj8683 4 ай бұрын

منشار أروع من رائع❤❤❤

@petten20233 Жыл бұрын

Just got the same table saw I find a bit strange the way it star .. it's like the break is on. ?? Right one the start a millisecond...Is this Normal let me know thanks Mario

@WannaBgood2 Жыл бұрын

I too have this saw (2 years now) and mine do the same. Not a problem so far 👍🏻

@oc_geek337 Жыл бұрын

Soft start. It avoid to trip your electricity breaker

@thejollyfrog640 Жыл бұрын

Lower the blade when cutting thinner wood.

@flyhigh2202 Жыл бұрын

When I made that video, it was the first time in my life that I used this type of equipment. Thank you very much for this information, which is otherwise very useful and very helpful in this job that I practice with passion. Later, I noticed this and it is practically appropriate that the blade should not be too much higher than the cut wood.

@fireworxz Жыл бұрын

At 20:00 you are doing a super dangerous cut. NEVER ever use the mitre gauge and fence at the same time. It is the most common cause of kick back.. Just a friendly advice.

@flyhigh2202 10 ай бұрын

Yes, thank you very much for your thoughtful message! I am a beginner and yes ... a little later I realized how dangerous it is to use the products without knowing how to do it correctly! So I'm still documenting myself and using KZfaq instructors to educate myself to use in the future! I thank you for your time!

@FisherCatProductions 7 ай бұрын

What he said. Don't ask me how I know.

@ivandjordjevic712 7 ай бұрын

Kad ugasis masinu testera pri stajanju deluje kao da nije u centru,to ne bi smelo da se desava,kosta skoro 2000 e.za te pare moze da se kupi vise nego pristojan profi cirkular cak i kombinovani.