Ib sou

Lol

You mean the washer. On a stock variator the washer can be removed. Its a restrictor. The washer supplied for this you use it for minarelli engines. Like the aerox and aprilia sr carb models

3,8 ó 4,5 gramos

2mm, but what is the purpose of the washer it provides? You can't install it without this washer. does it limit the opening of the variator???

Know it's a late answer but please upgrade your crank if you're gonna go 70cc. And put a malossi kevlar belt on it, change the exhaust to yasuni carrera 16 and for rollers, use 4.5 gram

You would Also need some tighter clutch springs so the clutch Will engage at a Higher rpm, or else it Will barely be able to get going from a stop because of the low rpms at launch

the malossi variator is built so that the weights go farther outwards than the original and the running surface for the belt is also larger so that a greater speed can be achieved

Toby Murs no

what oil there is no oil

@@ragehd2002 xD

You may need empty tank as it may explode

It works with any moped

@@sane6096 minkä tahansa skootterinkaa*

@@niksusa ihanko totta vittu

@@sane6096 no eiku tarus

@@sane6096 tarua

you dont need grease

En amazon👌🏽

It's a restricting spacer to limit top speed to 45km/h. You don't need it, but be careful around the police...

@@lockerzFITTOME thanks for the answer,but another issue,that I cant assembly my minarelli do I need to change the spacer that sors beneath the electric starter clutch to a thinner one?

​@@ferencbalogh9897 What scooter do you have? Do you mean the spacer that is visible at 3:12? It says you need a 5mm spacer only for Malaguti f12 scooters. Other minarelli engines take 2mm spacer. If you don't have it you can probably buy a spacer in a hardware shop. If it's more than 2mm you can grind it down to 2mm with some simple tools.

@@lockerzFITTOME I have an f15 thats a similar engine,like F12 but I want to use the electric starter,the problem is if I assembly like the factory variator I cant put on the Kick starter becouse I dont have any space,but if I remove the starter clutch I can easyli assemble everithing

@@ferencbalogh9897 So you don't have any spacers between variator and starter clutch and you still don't have enough space for kick starter? So I guess you don't even have enough space to bolt the variator and starter clutch on the crankshaft at the same time. It seems to me that you don't have the right variator for your engine. Do you know what engine do you have? Is it minarelli horizontal? I have Yamaha Aerox with this engine and I can measure how much crankshaft sticks away from the starter clutch and how thick is my variator.

2 arm puller

no because of the plasic ring on the hub if you remove it then your scooter will drive faster

@@ragehd2002 how much faster?

@@dageros_dima_csgo7431 its diffrent from scooter to scooter your scooter can drive up to 30kmh faster

What about the metal washer? Can I install without it as well?

​@@O_Mostr yes its exactly the same as plastic one just throws that in the trash