Manifold Runner Prep - 304SS 1.5 SCH10 - Tig Welding

Manifold Runner Prep - 304SS 1.5 SCH10 - Tig Welding - Postioner

Рет қаралды 45,260

Жыл бұрын

Thanks for tuning in to another episode! If your new hit that subscribe and like button!
If you would like to you can follow me on
Instagram @ Bnm_Performance_Fab
Also checkout our website at www.BNMPerformanceFab.com
Thanks and have a great day!
Sponsors :
Snake Eater Performance
Code For 10% off - BNM10
Rock Rooster Footwear
Code for 15% off - BNMFAB1
Combat Abrasives
Code for 10% off - BNMFAB1
Jag10Tools
Link for Discount
jag10tools.com?aff=7
Music by Karl Casey @ White Bat Audio
EverLast Welders Link
www.everlastgenerators.com/?r...

Пікірлер: 83

@stuntmanxtra3825 2 ай бұрын

Flawless work! Im a Honda enthusiast. Your work speaks high volumes! 💪🏻👍🏻

@butcheradam1000 9 ай бұрын

Screw the haters, you keep building quality products. Because of guys like you and many other I want to start doing this, im in school learning all the processes. I can combine 20+ years of being a diesel mechanic and my new skills as a welder and make my own performance parts. 🤘

@rickfazzini22 Ай бұрын

Killer work man, haters going to hate like you said that’s not your problem it’s theirs.

@bandaralfoaim8672 23 күн бұрын

Awesome man 🫡

@treatrayner1 Жыл бұрын

You are a highly skilled precision machine.Great work !

@jessbarnia4772 9 ай бұрын

Man nice work. I love using a positioner whenever possible. I’m in the nuclear industry and we do a lot of X-ray pipe work. We primarily use the J bevel which is a bit of a pain to prep but really sweet to weld! Great to see you purging as well. There are custom exhaust companies out there that are not purging and it’s disgusting! Keep up the good work and representing us welder/fabricators well!

@bnmperformancefab 9 ай бұрын

Thanks! I try my best

@weldingempire 9 ай бұрын

Nice process dude. Results start at the prep stage.

@SWFabrication. 10 ай бұрын

You're definitely consistent and your work is beautiful. I always enjoy seeing your posts on the gram.

@bnmperformancefab 9 ай бұрын

Thank you!! 🙌🏻

@UtubeUsername123545 8 ай бұрын

Beautiful work man, and thanks for sharing!

@NorthWestSamurai 9 ай бұрын

Amazing work, Very inspiring and informative. Subscribed and liked.

@markbarry881 5 ай бұрын

nice work there thanks for your take on things

@leonardruiz81 8 ай бұрын

I knew I recognized those welds on that 304... I follow you on insta. When I seen that positioner, I knew I seen that exact setup before. You're a badass with that torch!!! Fuck the haters, It only means you are doing something right. Keep killing it my dude. The content is great.

@pipersynthetics Жыл бұрын

Very clean work. I’m in aerospace and we use positioners on 90% of our parts I love using them. I want to get into doing more headers and customs intakes and stuff like you do with purging. I know I will with my pre-runner build keep up the awesome work I love watching the welding videos.

@bnmperformancefab Жыл бұрын

Thanks man I appreciate it! Will do, got plenty of stuff I can make videos on wether it’s welding, fabrication, part development and so on

@boostedzone1834 Жыл бұрын

Wao! can't wait to be like this, hi from Puerto Rico.

@geraldhyppolite8827 7 ай бұрын

Great work and clean!!!!!

@bnmperformancefab 7 ай бұрын

Thank you!

@bbuildsit 5 ай бұрын

Awesome video

@MichalCiekanski Жыл бұрын

Looking really good 🔥

@bnmperformancefab Жыл бұрын

Thanks Michal 🙌🏻

@quattrolabs_3383 Жыл бұрын

Great work. I think its ridiculous that people get butthurt about how a weld is done or not doing all different types of welding production. Like you said you do performance parts for cars thats your whole operation.

@bnmperformancefab Жыл бұрын

Yea it blows my mind to be honest, I have the utmost respects for the brothers and sisters out there working away in the field.

@charliehuntsman9827 9 ай бұрын

Bro this is awesome great work would love to just come job shadow you for a week hell a month just to learn so cool and very well done 🤘🔥🤘🔥🤘🔥🤘

@coleswearingen2365 6 ай бұрын

Fellow stainless welder here. I do food grade type stuff mostly but am working my way slowly into automotive. This was a great video and is exactly what I wanted to watch. I do wish we could have seen the root tho. Not doubting it’s good just curious👌

@bnmperformancefab 6 ай бұрын

I’ve posted so many videos and so many photos of roots to haters it is simply pointless. Go to the Instagram and somewhere along the line you’ll find the videos and pictures 👌🏻

@coleswearingen2365 6 ай бұрын

@@bnmperformancefab Will definitely be checking that out! Appreciate it bro

@oscarutrera9829 Жыл бұрын

Nice work.

@bnmperformancefab Жыл бұрын

Thanks!

@arlenhawks381 Ай бұрын

when you come to end of weld to prevent an eye in the middle of weld pull the eye to the side of the weld and slowly lift up tungsten and it will be gone, your welcome.

@mudd8844 7 ай бұрын

That’s awesome they look great. it does make me jealous hahahaah

@kungfuclutch2788 9 ай бұрын

Mint welds mate if I can end up this good I'll be done ✅

@bnmperformancefab 9 ай бұрын

Thanks mate!!

@ZRace67 Ай бұрын

I wish I had the money to afford the argon you go through in post flow

@gofastmetalworks 10 ай бұрын

What angle is your bevel?

@B18tegg Жыл бұрын

Awesome work man, thanks for the demonstration! Are you pretty much at full pedal at 100 amps once the positioner starts going?

@bnmperformancefab Жыл бұрын

Thanks man! I’m probably around 85-90 amps

@marcoss4563 Ай бұрын

nice intro! haha

@bnmperformancefab Ай бұрын

Glad you like it!

@viniciuszamith Жыл бұрын

where did u buy this torch cape ?

@anythingandeverythingfun5123 Жыл бұрын

Do you do lessons on this? Would definitely like to learn from you very clean work👍🏻

@bnmperformancefab Жыл бұрын

I don’t currently

@isaachunnids 7 ай бұрын

Do you weld one inch at a time

@pm270100 9 ай бұрын

have you done that befor

@NextEraCustoms Жыл бұрын

can u try thin wall stainless on the positioner like regular size header material 16guage

@bnmperformancefab Жыл бұрын

I do

@r.l.mashburn4851 9 ай бұрын

Sweet stuff.

@mikebrooks9201 Жыл бұрын

So many questions! How do you control, work out the speed of the positioner and how do you start it or is it timed?

@bnmperformancefab Жыл бұрын

I operate the positioner with a pedal, so my left foot operates the positioner speed and my right foot operates the Amps for the Tig all while using both hands to feed filler and hold the torch

@river2mountainoutdoors574 Жыл бұрын

Can you make a more in-depth video of the tig welder and what water cooler

@bnmperformancefab Жыл бұрын

That I can

@river2mountainoutdoors574 Жыл бұрын

Thanks man wanting to order this machine just want to buy the right accessories

@dagnysantana3375 4 ай бұрын

The wire wheel is stainless or regular wire metal wheel .? Im from Puerto rico. Nice work bro

@bnmperformancefab 4 ай бұрын

Stainless, other types will inbed material into the runners

@mrb.5610 9 ай бұрын

I need to build a positioner !

@mrb.5610 9 ай бұрын

Bought the bits - making it !

@turbochard7355 9 ай бұрын

Hey dude awesome job what gas flow you use

@bnmperformancefab 9 ай бұрын

Generally the torch is around 30-35 cfh and the back purge is around 10cfh

@paulsimpson2232 9 ай бұрын

Top quality work , looking at yours the manifolds pipes ive lust received for welding are junk. Wasted a damm load of money .

@bnmperformancefab 9 ай бұрын

Thanks 👍

@tommyzoladz5905 9 ай бұрын

How long did it take you to get good at feeding wire with your hand like that. I cant keep it stable. Like the wire wants to move in a curved direction.

@bnmperformancefab 9 ай бұрын

Just takes time, take a piece of filler and work on it while you watching tv or have down time. Not to difficult

@tommyzoladz5905 9 ай бұрын

Thansk for the response!! i will have to do that @@bnmperformancefab

@cyn9216 5 ай бұрын

im halfway through my welding progamme and i want to work on cars and do stuff like this. do you have any tips for me?

@bnmperformancefab 5 ай бұрын

Be patient with yourself and don’t be afraid to try new things and find your own way of doing things. Obviously fundamentals can’t be changed but how you hold the torch, how you feed filler and so on can be unique to you so figure out what works for you

@Mr.scarecrow1 Күн бұрын

how long did it take you get this good brutha

@bnmperformancefab Күн бұрын

I’ve been doing this now for 10 years, but don’t let that deter you. Some people got a back for it and for me I was fairly proficient within months. The fabrication side of it will come with time, the better you get at fabricating the easier the welding becomes. YOU CAN DO IT!!

@t-bone1890 Жыл бұрын

does clamping the stainless between carbon steel, cause issues down the road? any rust forming?

@bnmperformancefab Жыл бұрын

Never had a issue with it, it is simply holding a part is all.

@mattbfab 5 ай бұрын

Are you full throttle 100amps?

@bnmperformancefab 5 ай бұрын

No not all the time, the perks of using a pedal is being able to input heat and pull heat

@runifuceeme406 9 ай бұрын

HAVE YOU EVER THOUGHT TO RIG THE TORCH SO IT DOESNT MOVE AND YOU CAN JUST RUN ROD BY HAND?..

@bnmperformancefab 9 ай бұрын

I have but for speed sake just holding the torch to adjust for the part not being 100% square in the fixture is the best route

@makantahi3731 Жыл бұрын

nice job, but why is that pipe so thick(2.5mm?) why not thinner(1.6mm)

@bnmperformancefab Жыл бұрын

It is a turbo manifold, it’s roughly .110 thick has a 1.9 od and a 1.68 id

@ScoocumAF 9 ай бұрын

We build manifolds for alcohol and diesel pulling tractors from .063” 316 stainless (2.5” primary) and they survive over 100# of boost for several seasons. They are very concerned with weight. They either get ceramic coating or they turn purple/black after a few passes so the beautiful welding colors never last. I would use a weld positioner (or any tool that makes my work more efficient) if it is practical

@bendover-uf9st Жыл бұрын

How bad do they shrink?

@bnmperformancefab Жыл бұрын

Very minimally

@samueltaylor4989 Жыл бұрын

If you kept the positioner turning after you tapered off your arc, you would get a more even discoloration and not that stop line of different color.

@bnmperformancefab Жыл бұрын

This positioner doesn’t have a quick release feature where you can spin it around to get the starts/stops where you want them. To do what suggest would take more time and therefor I don’t do that. Some positioners do have that feature which if I had one that did would would but until then “this is the way”

@mrb.5610 9 ай бұрын

The color will probably disappear the first time the manifold gets orange hot under boost !