Absolutely! Our ECO-FLOW baffles provide structural strength, reduced back pressure, and great sound pressure reduction. We've had many customers swap out their baffle systems with ECO-FLOW. Whether or not it suits what you're looking for is ultimately your decision, but there's more info here: 9 - www.griffinarmament.com/9mm-eco-flow-baffle-upgrade/ 45 - www.griffinarmament.com/45-caliber-eco-flow-baffle-upgrade/

The use of a booster assembly on the Beretta 92 series can be a bit of a tricky question. It comes down to your specific Beretta 92 series pistol. With lighter suppressors like our Revolution and Resistance series, you can typically get away with unboosted use. With heavier suppressors like our Bushwhacker and Optimus, you will most likely need to use a booster assembly. Beretta 92 variants will typically tolerate ~6.5 ounces of weight before it begins to affect cycling. If your Beretta 92 firearms have been modified for unboosted use by lightening the hammer and recoil spring, you will want to use a fixed barrel mounting option. When using CAM-LOK on 9mm hosts, you can use a fixed barrel spacer or a CAM-LOK fixed mount. If your particular firearm has factory weight springs, it will typically be fine to use with the booster assembly. If the firearm has lightened springs to function unboosted, the use of a booster assembly will tend to cause more wear on your firearm.

You can find info on the A2 mount in this video at the 19:03 mark and 28:08 mark

We recommend looking into the Optimus 9! That'll be your one-and-done universal suppressor that works wonders on all of those platforms. Modular, user-serviceable, and best tuned for pistols and rifles!

Would a Griffin Armament Resistance 45 or Griffin Armament Revolution 45 work as well, as I am considering cost to buy all attachments and tax stamp ? @@GriffinArmamentOfficial

The Bushwhacker 36 is your next best option! It's currently on sale this month and is only $100 more than the Res/Rev 45. You're going to want to choose either the Optimus or Bushwhacker models if you're running on rifle platforms, being that it's full 17-4 stainless steel for better durability and still maintains modularity and serviceability.

@@GriffinArmamentOfficial you show that one to be out of stock

We keep everything in stock on our website. If it's out of stock via Silencer Shop or any other dealer, we have no control over that. However, you can buy directly from our website and have any silencer shipped to your door via our Silencers Simplified program!

I was thinking the same thing, website says 9mm…. Obviously a typo on the video

Yes, this was a typo@@jackwebb5917

@@GriffinArmamentOfficial I have a CZ scorpion, an Aero EPC-9, and several 9mm pistols. Would this suppressor support all of them?

Yes, with the correct mounting configuration, the Resistance 9 should fit all of your 9mm pistols. Check out our digital manual regarding mounting options and configurations: store-lbyqmcyjkm.mybigcommerce.com/content/manuals/DigitalResistanceConsumerManual.pdf @@jackwebb5917