I can hear the rim screaming for help

Got my changer in today. Works great. Ignore the trolls. You did a great job.

Thanks for the great video ...my attachment is for motorcycle tire ..so I can use it with regular tire ... thanks again have a blessed day

Great machines l cause more damage with tyre levers so l bought a machine like yours very nice great job

Great work! Thanks for the video!

Cool, the spec for the machine states max 16.5 inch tires but seems like it can go up bigger👍

Awesome very educational .. Thanks for sharing

The music is distracting. I’m only here because all the other tyre changing vids I’ve seen don’t have this adjustable top section to secure the rim. Plastic wrap to protect the rim is a must

Good content but stop the background music. It is an annoying distraction.

Easy to use and effective

I have a question when you break the bead are u resting the tire on the nub or inside the rim?

It's a nice video. I'm thinking of buying one. Can you do 18" wheels???. Like the video and metal track, who plays it. Cheers man.

is it possible to remove that vertical central axle which get out up the machine ? Because Citroen 2CV wheel don't have a hole in the center like most other wheels ( except a very small one to screw a central wheel cap). with this axle it would be not possible to have those wheels on the machine.

Can you change your regular car tire with this?

Would like to know could you change a truck tyre on one of these as would like to see someone do a video

Oh nice 👍 that’s also a deadly way to get all that pesky paint of your rim !!!

Man, All I could think about was my rim(s) DAMAGE :-(

Does the end bar allow a duck attachment?

Thanks man

I notice some nuts on the floor,do i have to drill /nail it to the floor? In thinking of putting it away and not permanently nailed down my garage, is that possible? Thanks

what a nice tool!! I also want to buy this one. would you tell me how to buy that tool.

Задумка, идея классная, если тебе не жалко царапать диски!!!

Nice work! Do you ever feel like you need to balance them tires?

can only do these tires, no low profile tires on Audi's & Mercs

Thanks for the vid. Also the music was good and not too loud.

So many try hards knocking the guy and the desire to DIY the idea is you don't have to run to a shop and pay $ you just do it straight away in your own garage , too many heros with more dollars to waste than the ability to do a bit of hard work , I have the same unit and have used it over a hundred times in the last five years , one thing I've never worked out is the offset of the centre shaft ,,is it easier to start closer to the shortest distance to the lip or the longest distance, it seems different with different rims and different tyres, cheers bro

How much? Im interested to buy

Omg that rim scrape tho

How to buy

how to maje the machine it self

How can made sir plz link share

Sir i want this machine where to I will go collector machine

How much

They do not sell that at Harbor Freight.

üdv nem sért neg a felnit?

Muestren acialacamara las heramienta conquesesaca lallanta porfa

1:05 that's painful to watch... nah nah you're all good mate

Should have mounted from the back side so no marring could be possible

This is NOT like the Harbor Freight one. It’s more similar to the Harbor Freight one with the motorcycle attachment but still very different. I believe this is the one where most stock images have the clamps facing backwards (!).

scratching those rims

Well that just scratched up the rim. I could hear the gouging metal

good!! where can I buy that tire changer machine? what is the model?, need a balancer too?

alot of negative comments about scratching the rims and flimsy bars. The point i believve is why have a $2,000 machine fir the ocasional tire swap. just the bead breaker is money well spent. tire irons and plastic rim protectors could be used if someone was super anal about their rims that are going to get destroyed in the trails!! ive been looking at manual tire mounts and the budget power fed. i just cant pull the trigger eithher way. Its hard for me to justify either other than gain a bunch of new friends that want to save money on tire swaps. Thank you for the video to aid in my search for the answer...

Problem with these changers is, the clamping system will damage a nice rim, and in stock form they will change a steel wheel without much fuss. If you want to change nicer rims, you need a cone for every rim you want to change as the clamping system does not allow for true center. Cones are not cheap. You could easily out price yourself with a manual changer... Also a trailer rim can be done in the same amount of time with a set of $8 ( HF) tire irons. The bead breaker on the manual changer is useful, but a slide hammer breaker is about $50... Not saying they don't work. I actually have one. Sitting in a pile of stuff I don't know what to do with. Every once in a while I get it out to use the bead breaker

1:05 Scratch.

Omg mega wheel damage

I cannot hear a thing with the music

Yikes. Great way to scratch the hell out of your rims

Muito esforço tô fora 😮

Get rid of the music. Too hard to hear you. Thanks for the video though.

good luck rim damage he he

O brother , pep boy charges $ 25 for each tire off the car . balance is extra 😠

Well here goes.... the music muffled your voice so badly that I almost stopped the video but I continued watching only because I wanted to see if you knew how to change a tire. Not bad! ... But, I have know idea why you hold the bar so high when putting the new tire on. It looked terribly awkward but maybe you had a reason for making it harder than it should be. Looks like you're getting your money's worth...thanks for the video.

Why the ghastly music?!!! I can't hear what you are saying for the racket in the background!

Curb rash rampage

Please! Lose the music.

Omfg that rim is fucked never use metal rod, om aluminium rims.

Do not buy these tire changers. I bought one and it broke before i could even change one tire what a piece of crap!!

Comic sans? Well, I´m out of here.

chili cost 5$ to cheng bot .asos want you $$$ they chol get a tike. from the consumer protections viure

The video was good but couldn't hear shit over the music

Those poor rims, metal on metal glad there not mine

the music sux

Povero cerchio

Это оборудование называется ПИЗДА бортам на дисках!

please remove annoying music

OMG, another harmful metal tool on an easily damaged softer metal rim! Why are we doing this, people? If you’ve done 20 sets of tire changes like that, you’ve damaged 20 sets of rims. Buy a No Mar tire tool with the safe nylon end. Yes, they’re expensive, but well worth the price. If I were your customer, I would ask you to buy me a new set of rims after getting them back all scratched and gouged up. Your method may be acceptable for farm equipment or a trailer perhaps, but not at all practical for today’s expensive wheels made of aluminum, magnesium, or those that have a powder coat finish.

And you are completely stuffing the rim of that alloy with the un-protected bar! Buy a proper​ bar with protected ends, FCOL!! FAIL!!!

Great spirit and attempts to do it right..... However..... you scratched the shit out of those rims..... take it to a shop..... please.

I can hear the rim screaming for help