Our 500+hp FK8 Honda Civic Type-R

Our 500+hp FK8 Honda Civic Type-R | ft PRL & Hondata

Рет қаралды 36,411

Жыл бұрын

With a goal of 500whp in mind, it was a no-brainer to reach out to our friends at PRL and Hondata and do the necessary upgrades to support this type of power. Watch the full video for Installation, Dyno Pulls, and more!
Check out the Products we've upgraded in this video to reach 500+hp!
PRL P700 Turbocharger
bit.ly/3KgEQv7
PRL High Volume Intake Kit
bit.ly/40x5jtx
PRL Titanium Turbo Inlet Pipe
bit.ly/40Ba2u4
Hondata Direct Injection Upgrade Kit
bit.ly/3z674lz
MAPerformance Downpipe
bit.ly/3nlAI3T
Subscribe to our KZfaq channel: / @maperformance
Follow us on Instagram: / maperformance
Facebook: / modernautomotiveperfor...
TikTok: vm.tiktok.com/ZMJMVPSCx/
Contents of This Video
0:00 Intro

Пікірлер: 85

@jackofalltrades3011 Жыл бұрын

Can’t wait to see one with your own parts! MAP intake and, front pipe, downpipe and exhaust, please! Just need a turbo inlet pipe, and it’s a complete set!

@maperformance Жыл бұрын

Someday, that may just have to happen 😎

@jackofalltrades3011 Жыл бұрын

@@maperformance I just got my FK8, and I’m eyeing your guys’ updated intake real bad! Haven’t seen anyone else post a video about it besides you guys. I’d like to make a video about it!

@alexlopez2995 3 ай бұрын

@@jackofalltrades3011 I have their V2 street maf intake on 19' FK8. I absolutely love it. Seems a little louder than the PRL intake also. Judging off my brothers FK8. Regardless, its 100% worth the upgrade. Ive been running with it for several months without tune and the car has been behaving great.

@cj41079 Жыл бұрын

Can't wait to see when you guys build Dustin's FK8.....

@eetra8988 5 ай бұрын

One of my Dream car

@fkhothatchi Жыл бұрын

Please have some proper ducting for the intercooler only wagner tuning has those in consideration in their design. that not only helps with the cooling tremendously it also adds some DF if its done properly especially you guys have front mount MAP oilcooler it will such a badass cohesive design if you guys are able to tie them together with proper ducting. and I will definitely buy them

@shiloh5199 Жыл бұрын

Great video

@maperformance Жыл бұрын

Thank You for your support 🙏

@exelleon9922 5 ай бұрын

Can u run that drop in turbo with stock fuel system?

@vadim7131 Ай бұрын

Great power, but this car has PRL P700 turbo in it, capable of generating more than 600 HP. I was wondering what is the limiting factor to achieve that number? You have upgraded fuel system, fuel pump, spark plugs, intake, turbo.... Is it the engine block that needs to be build to handle more power, or what? Thanks

@vteckickedin Жыл бұрын

great vid! 🎉 whats the exhaust used for this vid?

@maperformance Жыл бұрын

Our MAPerformance Catback Exhaust 💪

@bernabematias5880 Жыл бұрын

👍💪 honda power

@maperformance Жыл бұрын

🙌❤

@rodwinmartinez304 Ай бұрын

And how much for everything parts and labor?

@IndoBean 7 ай бұрын

Pushing 500 hp on stock internals? How long would that hold up out of curiosity?

@carminered 2 ай бұрын

the other question is: "why?"

@user-pl5ty1te9o Ай бұрын

It's a k20, so it's going to be fine

@9kalltheway 3 ай бұрын

Turbos for power. Doesnt matter if it has a honda badge or a Hyundai badge. Ez power. Nothing beats vtec.

@kingsmith3355 6 ай бұрын

Can I do these same set up on my 2018 Accord 2.0t? Will the hondata fuel system work

@vadim7131 Ай бұрын

No, accord will not work with this fuel system, sorry. Its made specifically for Type R. These engines are not identical

@LynnDisclose Жыл бұрын

Hey I got a 1.5 liter civic hatchback, are jpipes good for drone after I get the 3inch front pipe put on?

@maperformance Жыл бұрын

Hello 👋 as far as "good for drone," exhaust drone typically comes from the exhaust itself, depending on which configuration you do there can greatly affect your noise levels at variable speeds.

@LynnDisclose Жыл бұрын

@@maperformance so it will be loud? People say they usually get a jpipe welded on. But sports cars like Ferraris and Lamborghinis. Nissan GT-R. Etc . They have jpipes already built in stock to cancel out the noise

@alexlopez2995 6 ай бұрын

Curious why you didnt install your own intake instead of the PRL?

@Blake_Drago 4 ай бұрын

Because the prl has the race Maf option and theirs is street maf only.

@orcahang21 Жыл бұрын

Good 👍 ASS job Brudda ✌.

@maperformance Жыл бұрын

Thank you ❤

@carminescotto3775 Жыл бұрын

Can stock engine handle this power?Because they report that this engine soffer of nont strong connecting rods?its that true?

@maperformance Жыл бұрын

This is on a stock block!

@kiyaansomers2243 9 ай бұрын

What wheels are you running in this video?

@sgillard960 2 ай бұрын

I had the same wheels on mine. Rays XR 57 Gram Lights. Very strong and used for 1000hp drift cars.

@LynnDisclose Жыл бұрын

So front pipes do add power?

@maperformance Жыл бұрын

Yes, they are a larger diameter than stock, so more flow!

@TheFK8Life Жыл бұрын

All you need is downpipe with front pipe - Stock exhaust flows well - made 547whp on stock exhaust

@LynnDisclose Жыл бұрын

@@TheFK8Life wow

@bgoodie4584 7 ай бұрын

@@TheFK8Lifeabsolute madman

@cristianchaves1415 10 ай бұрын

Picture of the power ? Graph ? Please

@sfisosg7904 19 күн бұрын

Watch the video

@raymond25222 11 ай бұрын

How much boost are you sitting at to make 480-490? I’m currently at 435 with all those mods. The HPFP started to max out at 27psi

@raymond25222 11 ай бұрын

Forgot to mention I’m also at E50 mix

@SimplesolutionTS 11 ай бұрын

@@raymond25222 an e40ish mix, and about 29psi

@josephhartrich2495 Жыл бұрын

Where could I get this done for mine?

@maperformance Жыл бұрын

We can supply all of the parts! Grab an experienced friend or contact a shop local to you that you trust.

@eduardo112200 10 ай бұрын

How much can I push with the 1.5T reliably? I have all the PRL bolt ons and the W1 turbo but it’s not calibrated 😢

@dylanmcdaniel4314 2 ай бұрын

300 max

@ajlopez1820 Жыл бұрын

what wheels???

@maperformance Жыл бұрын

Rays Gramlights 57xtreme!

@phonglam4889 8 ай бұрын

how do you have good review fast shipping . ordered 3 week and orders still 🥱

@yomomma8510 Жыл бұрын

Is the clutch slipping at 7:44Or am I just tripping

@SimplesolutionTS Жыл бұрын

Spinning

@StrongerThanEver84 Жыл бұрын

would've been nice to see some pulls on the street

@maperformance Жыл бұрын

Soon! We're currently experiencing "the great melt" as the weather is quickly changing here in MN. As well as some better tires to stay hooked up 😅

@gearheadfreak Жыл бұрын

Get me to 500!!!

@maperformance Жыл бұрын

We can get you the parts to get you there 😎🙌

@ViperFPV Жыл бұрын

Soo u made more power first with the SI? Weird

@TheFK8Life Жыл бұрын

It's not weird - it was a fueling issue as the Type R has a Bosch ecu vs the Si/Accord having standard Japanese ECUs that were much easier to crack/tune/fuel There are 9sec@145+ Type Rs now - no Si has run 9s but were first to the 10s

@erickmarte5294 Жыл бұрын

I think they did that because the SI is widely more available than the type R, making the SI their first car to modify is an easier way to make money by making parts for the more easily available car. This is all speculation tho.

@ViperFPV Жыл бұрын

@@TheFK8Life thanks, love learning.

@ViperFPV Жыл бұрын

It’s just weird if u think just numbers, 300+ for the R it would be easier to hit 500.

@TheFK8Life Жыл бұрын

@Viper_FPV anytime My Type R is making 566whp@7600/440wtq@4800 on an oem motor and direct injection only - you will not find an Si on earth close to this The direct injection limitations keep most Si builds in the 3xx range - a few have made more in the 4xx range on port injection secondary fuel but most have blown up. MAperformance blew theirs up spraying nitrous on top of boost to get them more power in the 5xx range Type R with cams have made 630whp with an oem engine and a pit 720whp on a basic built motor direct injection only - no secondary fuel. Took a while to figure out the ECU but I'm guessing we will see 750whp direct injection only on Hondata by summer

@somuchjuice5528 Жыл бұрын

500whp on a stock motor?

@maperformance Жыл бұрын

Yes! Just turbo and fueling!

@DimoS... 6 ай бұрын

What's the limit on stock internals? 600hp? Also the geaebox is ok with this power?

@antoniobermudez4989 Жыл бұрын

I don’t think the internals will handle that power at the long run

@maperformance Жыл бұрын

We've since turned the power down juuuust a hair to maintain reliability as this car sees the dyno/track more often than most of our cars at this point. It now sits at roughly 485/490 and has been fantastic.

@bgoodie4584 7 ай бұрын

@@maperformancey’all gotta upgrade that block if you’re gonna be making that kinda power long term, low 400s on the stock one is crazy enough

@lodisish Ай бұрын

Not even a test drive outside? lol

@semtex50 Жыл бұрын

Bro ...... I love you guys but those numbers are weak as hell for the parts listed...🤔 $0.02

@SimplesolutionTS Жыл бұрын

How much would you expect it make

@semtex50 Жыл бұрын

@@SimplesolutionTS Its not so much what "I" expect. Besides goals were met and they are satisfied ( which is what's important 👍🏾) but I've seen other build paths that render the same numbers without such an extensive parts list. That's all

@SimplesolutionTS Жыл бұрын

@@semtex50 theres nothing really extensive here... its bolt ons and a drop in turbo. not sure how familiar you are with type R's, but the stock turbo and fuel system only get you so far.

@semtex50 Жыл бұрын

@@SimplesolutionTS Your right my guy. I'm totally unfamiliar with not only Rs but cars in general. Your superior knowledge is a stroke of genius and how dare I not know stock components are a limitation. Fucking genius 🔥

@TheFK8Life Жыл бұрын

It's the hondata hpfp - with an XDi they would make alot more - I'm at 566whp on e50 with 1430 injectors and dw300c intank pump