XMP Troubleshooting - How to Fix Black Screens, Blue Screens and Random Crashing After Enabling XMP

Рет қаралды 292,504

Күн бұрын

So you just enabled your RAM's XMP hoping to squeeze a little extra extra performance out of your PC but after rebooting you see nothing but a black screen. Or maybe your computer booted up just fine afterward but whenever you're playing a game or running certain applications your computer crashes out to the desktop or your greeted by the dreaded blue screen of death!? Some of you watching this video very well may have learned what XMP is and how to enable it by watching my video about it so if you're experiencing problems after enabling XMP I'm back to help you fix them. I know these problems can be concerning, especially the black screen thing, but don't worry getting your system working properly again is pretty simple. In this video I explain why these problems sometimes occur after enabling XMP (or DOCP if you have an Asus motherboard and an AMD Ryzen CPU) and what to do to fix it. Including how to get your PC working again if you have nothing but a black screen going on. That, by the way, requires clearing your motherboards CMOS. :)
If you need some help removing and then reinstalling your graphics card to get to your clear CMOS pins or CMOS battery here's the link to my graphics card upgrading video that will help you with that.
• How to Install a Graph...
Show your love and appreciation for the channel and take your support to the next level by checking out my Amazon store where you can purchase items I feature in my videos -
United States - www.amazon.com/shop/maraksot78
Canada - www.amazon.ca/shop/maraksot78
United Kingdom - www.amazon.co.uk/shop/maraksot78
Wanna skip to a particular part of the video? Use the Time Stamps. :)
Time Stamps
0:00 - your PC may not support your RAM's XMP
0:12 - XMP stability symptoms
0:38 - your XMP is too fast for your Memory Controller
1:36 - what to do to fix it
2:13 - if you've got a black screen, don't worry
2:48 - how to clear your motherboards CMOS
4:12 - how to get at least some of our RAM's performance back
5:56 - I am NOT a RAM overclocking expert
Music in this video - "Apolllo" by Patrick Patrikios from the KZfaq Creator Studio Music Library
#XMP, #RAM, #Overclocking, #PCMR,

Пікірлер: 575

@Maraksot78 2 жыл бұрын

Wanna skip to a particular part of the video? Use the Time Stamps. :) Time Stamps 0:00 - your PC may not support your RAM's XMP 0:12 - XMP stability symptoms 0:38 - your XMP is too fast for your Memory Controller 1:36 - what to do to fix it 2:13 - if you've got a black screen, don't worry 2:48 - how to clear your motherboards CMOS 4:12 - how to get at least some of our RAM's performance back 5:56 - I am NOT a RAM overclocking expert

@coltmccoy1195 2 жыл бұрын

what if thats not the problem

@imperialspacemarine1539 2 жыл бұрын

there is an easier way then your trial and error method. gogle with your phone or let a friend google your cpu. ther it gives you the rating of your chip. match it or just be below that and you are golden

@imperialspacemarine1539 2 жыл бұрын

@@coltmccoy1195 if you expierence the blue screen of death (or blackscreen) and thats not the issue you might have one of 2 Issues: 1.(most likely if you just upgraded your ram or moved your pc a lot) the contacts of your ram sticks might have slipped out. to fix it pull out every stick and put them all back propperly. 2: you might have a faulty ram stick. try another ram stick set if you have one or if you have multiple sticks put in, pull them out seperately (and put the remaining in the configuration specified by your motherboards manual for single channel if you have either 3 or 1 stick left) this way you should find the faulty ram stick. If that doesnt help your PC *MIGHT* already be bricked.

@ghostinthenight1958 2 жыл бұрын

Wish I'd found this guy sooner, perfectly described what i went through with the black screen, panicking, then discovering the cmos reset

@chriskafadaris9253 2 жыл бұрын

Me too

@danimper2517 2 жыл бұрын

True haha :D

@Nick.L. Жыл бұрын

Is there any way to go through the process without the reset? I applied new timings and can not boot. Palit GPU lights keep flashing white. Tried output through integrated graphics and that doesn't work either. I really don't want to reset my entire bios

@electric-crib2682 Жыл бұрын

Different level of anxiety 😂😂

@salmanjahid5667 Жыл бұрын

Same goes for me

@nicolasalcantara6098 2 жыл бұрын

You are a lifesaver. I've been using my 3200mhz ram at 2133 for two years, and you fixed the problem for me. Great video. Short and on point.

@Logan-ix8vh Жыл бұрын

Same lol

@IAmSwatchingYou 10 ай бұрын

Bro thank you so much for making this. been running at base 2133mhz for 2 YEARS now because XMP kept crashing and most of the other ram overclocking guides were wayy too complicated. breaking it down like this for beginners was a huge lifesaver. Was going to go upgrade my ram to 32gb just cause rust was borderline unplayable with stuttering right as i or the enemy run into each other and shoot. now will test and hopefully not have to spend for no real reason besides that. Thanks again!

@thomyads 6 ай бұрын

Yeah, especially when this topic, and tbh most things that regard pc issues, are so hard to search for. When you can't properly identify your problem and can't find a tutorial anywhere. I just happened to stumble on this video and went "Why hasn't this shown up sooner!" But yeah.

@riffcrypt8438 2 жыл бұрын

Awesome video! I recently got a nice prebuilt and noticed the memory speed running at 2666, and wanted to enable xmp to take advantage of the full 3200. Was reconsidering after looking into how it could potentially make the system less stable, but now I have enough info to be confident in tinkering that I can undo any mistakes if they happen. We'll see how it goes! Thanks!

@XerxesMacGregor__ 2 ай бұрын

Does that worked bro?

@riffcrypt8438 2 ай бұрын

@@XerxesMacGregor__ Yup! Never had a problem with enabling XMP and setting the RAM to the speed on it's label.

@dreamharmonics14 5 ай бұрын

My games were freezing and couldn't do anything about it after I upgraded my Rams, I reinstalled the windows, updated the drivers, did some settings, and bought new Rams even.. put thermal paste on my GPU and still didn't fix the freezing. I looked at many videos till I got you and I entered the Bios and Lowered my XMP from 3200 to 3000 and now no more freezing, happy days! Just wanna say a big thank you for your well-done work.

@user-hn7qd8ec4r 23 күн бұрын

i also have the problm can you help me

@JosephWheels Жыл бұрын

Thanks solution worked for me, I had the black screen after installing 64GB of ram . When I lowered the speed from 3200MHz to 3166MHz the system booted up without issue. Wish I knew more about computers - feel like I'm in the dark most of the time. You are a great instructor.

@Maraksot78 Жыл бұрын

Super happy to hear the video helped you get your system back up and running. Cheers. :)

@santhoshsriram4979 Жыл бұрын

Should the xmp be still turned off?

@iikatinggangsengii2471 10 ай бұрын

@@santhoshsriram4979 yes you should set the speed manually, 4 sticks/ full slots are usually like that

@JamaicanMeBritish Жыл бұрын

OMG!!! THANK YOU!! The past 2 days I been getting crashes, and once I found out it wasn't just one game but a couple of games doing it, I narrowed it down to RAM and GPU issues. Then after I remembered I had to reset my BIOS back to default over something that turned out to be dumb 2 days ago, I searched KZfaq and found your video. There was one little setting I forgot to change back in BIOS after the reset. Gave this video a thumbs up and subbed!!

@tyr8614 Ай бұрын

Ok and what was that setting ?

@beProsto 17 күн бұрын

WHAT WAS THE SETTING 😭

@oZempy 2 жыл бұрын

Thanks for this video bro it means the world. I have been dealing with the exact problems that you explained in the video for over a year now, and I fixed it thanks to you ❤

@prism1843 2 жыл бұрын

Thank you for the tip bro. I went full nuts on my ram and got black screen, i almost cried. Great job!

@prodbysayo Жыл бұрын

I'm so happy I found you early, I don't know what I wouldve done without you. ❤

@CobraSmokehouse 3 ай бұрын

I had the game crashing issues after I had to do the CMOS reset to fix some other issue that was preventing my PC from booting. All I had to do was turn on XMP again like you showed,I also turned the frequency down one level like you suggested and so far I'm 2hours gaming with no issues! Thank you a ton for your video,still helping folks 2 years later!

@batjexx3286 Ай бұрын

howd it go?

@Cygnus56 9 ай бұрын

Fabulous explaination, simple and concise compared to so many other channels....

@maryeng5458 Жыл бұрын

I upgraded my mobo/cpu/ram/cooler (r5 3600x to r7 7700x / ddr4 to ddr5)and was getting non stop crashes with games/having multiple apps open. So I sent it to for repair as I gave up and had no idea what to do anymore. I got it back and they told me everything should run fine but after getting home and $140 down later I started up my pc and I still had the same problem! Not wanting to waste my time there anymore I tried once again to figure it out on my own and I was blessed and came across your video!! Turns out under clocking my ram was the fix. I can’t thank you enough for making this video. Liked and subscribed thank you so much!!!

@jairosskopf9491 5 ай бұрын

I’m having the exact same issue with the 7700x too, can’t run my memories on 6400mhz, 6000 or even 5600. Could you share the video you watched to understand volt your rams?

@MindzEye03rd 22 күн бұрын

You jumped onto a brand new platform going am4 to am5. I would revert back to am4, back up every thing then build the am5 system and restore backups. Your system Registry probably has a lot of conflicts with that big of a leap.

@tiomurray 10 ай бұрын

Great to the point video and exactly what I needed when my comp wouldn’t boot up after toggling the XMP in bios. Perfect fix for me… thank you! (And no I didn’t know xmp was a form of overclocking so thanks for that as well)

@americasace Жыл бұрын

I didn't realize that this was even a thing until I stumbled on your video. All I know is that when I had xmp enabled my games would crash and memtest86 showed a bunch of errors. That was fixed by disabling xmp. Only NOW do I know that I can step down my xmp profile thanks to your video. Thumbs up and subscribed! btw, I went down from 6400 MT/s to 6200 and now everything works fine.

@Kqlisa 5 ай бұрын

I think i might have the same problem, im trying 3600 to 3200 with a r7 5700x

@americasace 5 ай бұрын

@@Kqlisa give a try. Pop into any game . If there's an error. The game will crash in a few seconds.. up to 30 seconds

@americasace 5 ай бұрын

@@Kqlisa let me know if what you tried worked . It did for me. I hope it does for you too

@MindzEye03rd 22 күн бұрын

Or try updating you bios, perhaps your bios is old and doesn't support the newer memory without an update.

@FlashFlicks438 2 жыл бұрын

Sir u save my life i just change my board my rams my supply everything but when my friend suggest this video and now i fixed my solution sir thanks alot

@LJHUNCHOLive 8 ай бұрын

Thank you bro! The method at 3:26 saved my life today after trying so many different methods from other videos 💯

@matetoth5705 10 ай бұрын

The minimum that I can give you is a like for the help that you gave me. I don't wish that fear for my worst enemy what I have felt when I got the black screen. I have popped the battery out and back just how you told to and after that my old PSU cabel decided to give up and give me a few more heart attacks by turning off my PC several times. I switched my cable asap and my pc works just like it did before. Thank you so much! You saved me really!

@qtube2007 2 жыл бұрын

good video. you should have mentioned that a bios update might help as well. A lot of ASUS MBs have problem with XMP (both DDR4 and DDR5 - talking Alder Lake here) But even for older generations; look to make sure you have the most recent bios flashed. Also, if it is working at some level now; make sure you save the bios settings or take pictures so you can at least get back to what you had before you start updating bios and trying xmp and xmp 2 . good video though. thanks.

@Isma-_-only 2 ай бұрын

I know it’s been two years, I updated my bios and it worked man thank you, but it’s been 2 weeks and now it’s crashing again, have any idea why?

@marcsandiford7166 Жыл бұрын

After hours on end changing settings around I came across this video disabling my xmp helped me tons on tarkov stuttering.

@NemesisXwrestling Жыл бұрын

Thanks. I was actually kinda panicking seeing the black screen. Thanks for the advice, i finally could push my pc games to the maximum!

@pablorodriguez4217 Жыл бұрын

Thank you very much!!! :) It did work for me for a MSI B550-A Pro and Corsair Vengeance LPX 3200 setup. When I turned the default XMP on for DDR4-3200, I was getting random crashes while gaming. I even updated the bios as a last resort, but it kept crashing. So I switched to the next lower available speed listed, 3133 in my case, and it worked like a charm. :) Thanks again and keep the nice videos coming

@syafiqsuhaini7255 Жыл бұрын

What is your cpu and gpu??

@redditmanllegnisthebirdofh9887 Жыл бұрын

@@syafiqsuhaini7255yeah for my 7700x and 4090 nothing has worked hopefully this foes

@BenjaminBiswas Жыл бұрын

Same here

@pablorodriguez4217 Жыл бұрын

@@syafiqsuhaini7255 it is a Ryzen 5 5600 and a RTX 3070

@FirstnameLastname-cw1my 10 ай бұрын

@@pablorodriguez4217bro I have same motherboard and I am facing this same issues but not while doing gaming all time but also doing normal stuff now I will turn it off and set it to lower thanks man for help😢

@Koeras16 2 жыл бұрын

It is not always the memory controller who is lacking, could also be the motherboard. Some boards might also need some help to get some clocks running, like fiddling with voltages yourself, enabling Gear down mode or 2T. Fiddling with SOC voltage and or dram voltage might also help. Same goes with ProcODT, RttNom, RttWr, RttPark and the four DrvStr settings. Loosening some timings does might help too. Checking if your motherboard does support the specific RAM sticks you bought might also be a good idea.

@Fondofmelobster Жыл бұрын

What if mobo supports my model ram? Where do i start learning about how to modify the above settings you listed?

@Koeras16 Жыл бұрын

@@Fondofmelobster Searching about it is a good start I would say. You might also find some technical documentation and& or people summarizing some of those... I personally learned through a lot of curiosity & try and error. If I had to guess this can be studied in much deeper ways though... Don't change anything you don't understand though! You might harm your hardware.

@hardstylboy Жыл бұрын

have asus prime z690 i9 12900k same problems 16gb ripjaws v ddr4 3600 have also a uncore freq 3600 to 4700 on 2133 no problem on xmp 1or 2 3602 problems also on 3200 have problems bios are update no differnts i feel rip off

@effectspedals 10 ай бұрын

You're explanations are wonderful. I'm really appreciative. Best regards

@MadCleaner 2 жыл бұрын

Thank you. This helped me. I have two ddr4 3200 and now they are run under 2933. This is good solution for me.

@fudhailapiz7400 Жыл бұрын

Thank goodness i found this video, thanks man, this really help me so much and it works for me .. finally i can play some games in peace 🙏🏻✨

@patrickazzarella6729 4 күн бұрын

Thanks so much after a week of running normally at 3200 after enabling XMP, I experienced 3 game crashes, 2 with blue screen. Trouble shooted my ramsticks and disabled XMP and it worked just fine. Gonna try your solution of slowly increasing ramspeed

@xXDrocenXx 11 күн бұрын

You helped me a lot after now half a day of troubleshooting. Thanks.

@SHAMFK8 2 жыл бұрын

For some reason this was the most simple and helpful video. I’m building my first PC ryzen 9 5900x/ RTX 3080 and I bought too much ram, 16gb ddr4 Tridentz 4800 mhz. I know I probably can’t run this speed but I’ll probably start at 3700-4000 mhz and just wanted to see how to simply change it without fucking with all those crazy timings. THANK YOU!!!!! 🙏🏽

@amvtunes4500 Жыл бұрын

So how much can the ryzen 5900x handle?? I have the same specs with a 3080ti and ddr4 32gb 4600mhz ram And i am trying to get the most from it It would be very helpful if you reply

@amvtunes4500 Жыл бұрын

@@MaxIronsThird so why do I get the blue screen error when turning the pc on while use the xmp profile Of 4600

@Budrick3Gaming Жыл бұрын

Thank you for making this video. I notched my oc down one and had stability again. Thanks brother.

@Maraksot78 Жыл бұрын

Glad it helped

@pending...... 11 ай бұрын

Thank you for this video,i got my new pc the other day and when i overclocked my ram it booted normaly but when i started playing csgo my pc restarted by it self and would not bootup so i took the battery from my other motherboard and thank God everything works now

@Botataung5 11 күн бұрын

Thank you. My 11400 on a gigabyte b560 MB, I could never turn on XMP. It just crashes randomly. So been using with XMP off for the last 2 years. I saw your Video and now turned on XMP with 3066 and been running Valley, 3dmark stress test and cinebench on a loop for the past 48 hours. Also Diablo 4 for a few hours. So far no crashes.

@H-R-HARIHARAN 2 жыл бұрын

wow ! i tried last 1 year to fix this issue i got bluescreens random crashes many issue i am using Corsair Vengeance pro rgb 8x2=16gb 3200mhz after switching it to 3133mhz its so much fine i am using this from a month after switching it i am not even got one crash you are a god thx bro. its a useful video u got a sub :)

@baseracer 7 ай бұрын

Thanks for the video! I had newly built my computer. So when booting up, I played around with some settings in the bios. And so I changed Dram frequency to 5200 (because that is what I bought). This caused my computer to freeze completely when I started playing games. I had to turn off and on the computer to get it to work again. Luckily this video helped me a great deal to resolve the issue.

@Grimoor Жыл бұрын

thank you, msi a-xmp was to unstable and caused a lot of blue screens and black ones as well, i disabled a-xmp and used the drop down list and picked the 3066 speed and it works smooth now, i used memtest86 on the unstable overclock and after 2 hours and 9k errors and change it stopped itself and displayed in giant red letters FAIL lol i had just watched this video before the test and was able to lower the speed and it works, i know its not the rated speed but i was on 2666 with my other ram, still an upgrade, thanks again.

@1910alexander Жыл бұрын

This was a big solution for me. Thank you very much this is a big help

@anbuyeme Жыл бұрын

Thanks bro this helped a lot I seen a tiktok talking about xmp but never said there could be a chance where it turns your whole pc off and gives you a black screen 🤣

@Ty-vm4di Жыл бұрын

Dude you are a real pc master thank you it was helpful

@helpontheway 2 жыл бұрын

I trust you with my memory. ‘Expert’ is not good English I feel. You’re a god

@johannesheiskanen 9 ай бұрын

I LOVE YOU MAN!! I was panicking and didnt know what to do. This video helped with all problems.❤❤❤❤

@Maraksot78 9 ай бұрын

Glad to hear it!

@sam-ro1ob 4 ай бұрын

Thank you!! I wish I had found this video before factory resetting and that not solving a thing! if anything it made it worse but after enabling xmp the crashing stopped

@NachoPlays97 Жыл бұрын

Thank you I thought I broke my pc by setting the frequency too high and I just took the battery out and put back in and it worked! Thank u!

@palletjackthepirate9926 2 жыл бұрын

Thanks for the amazing video it was very helpful. my cpu ran my previous ram just fine at 3600mhz but at the time was only 2 sticks. when i upgraded my ram and now had 4 stick the memory controller probably couldn't run all 4 sticks at that high of speed.

@juliangarcia6073 Жыл бұрын

I had similar issues when i added two more sticks of the same ram

@MitchellTheMitch Жыл бұрын

Yo? Someone who had the same issue as me? Glad to see I'm not the only one

@palletjackthepirate9926 Жыл бұрын

@@MitchellTheMitch ayo I fixed it but you won’t like it it was a bad ram stick for me take one out and run that for a day and see if you get the crash if so try the other stick if one is bad you’ll need a new set. If the ram is new you can try to exchange it. If you have any questions respond and I’ll see it in my email

@bensoontm5244 2 ай бұрын

Hey there, I just wanted to say thank you for this quick tutorial. A friend of mine recommended me to just turn on XMP but little I knew what I issues this would cause over the next weeks. Long story short my CPU only supports a maximum of 3200 speed but the ram goes to 4000. It caused games like Dead By Daylight and Fortnite to consistantly crash, not even the support could help (20 emails back and forth until they ran out of ideas and dipped me) 30 Minutes ago I tried to repair windows files, it crashed 3 times until the system didnt even boot up anymore. I followed your video, removed the battery on the mainboard and it magically boots up again. I checked the ram speed and it was back to 2133 which I set to 3200. THank you so much for this video. If I only knew this video existed earlier but now I know! CHECK YOUR COMPABILITIES GUYS!

@Maraksot78 2 ай бұрын

Sorry you had to go through the nightmare of RAM instability. I know how frustrating and worrisome it can be. I'm super happy you found the video though and it helped you out. Cheers.

@Bousiefadehouse Ай бұрын

Thank you so much i was having issues when setting my Xmp to it's base profile of 3200mhz rated speed and could not boot into windows and i set it down to 3000mhz and works like a charm went from 2133mhz to 3000mhz thx!

@batmantechsupport 5 ай бұрын

Thanks a lot It worked. Local mechanic couldn't fix it but you. Thanks again.

@KilluaZoldyck-wh8zc 3 ай бұрын

You're life saver dude!!! Liked and subbed ❤

@ijustlovethisname 2 жыл бұрын

Good video :) I put on XMP and my RAM got set to 3600Mhz which caused crashes in games etc so i put it down to 2133Mhz and it all disappeared and worked fine. I use an I5-12400f which intel says SHOULD work up to 3200Mhz at ddr4. I'm now at 3100Mhz and it works fine but will try to see if i can get it to work at 3600Mhz ^

@joaquinnievas6364 2 жыл бұрын

i have the same microprocessor but i can't use any other frequency than 2133mhz. the memories are 3200mhz, but I can't use them even with 3000mhz the games are closed.

@joaquinnievas6364 2 жыл бұрын

I still can't find a possible solution

@snibelsnabel7209 2 жыл бұрын

This really helped me, thanks!

@miladjrad 6 ай бұрын

quick and simple thank you for your help man.

@jasonosborne1574 Жыл бұрын

You saved me lol I built my first pc and didn't know what I was doing apparently a 11900k with a z590 wont run the xmp that's on these 4100mhz ram sticks I have had to bump it down and no more issues

@robifleming 2 жыл бұрын

I’ve run into the exact same issue. I have an X570 taichi, 5600X, 4x8GB TRIDENT z.skill rated at 3600MHz and I can only get things to run smoothly at 3400MHZ.

@hom3r Жыл бұрын

Sometimes after enabling xmp you need set the speed manually. If not bump a little voltage for it to work.

@xMaverickFPS 2 жыл бұрын

You cured my anxiety, but now it's time to fix this lol

@heardyoulikeanime1343 Жыл бұрын

Thank You so much, 3100 worked for me! 😘😍 been trying from almost 6 months.

@MLGWuba 11 ай бұрын

Great vid everything you should know here besides the more in depth OC

@sahilalikhan3416 20 күн бұрын

Your video helped me a lot thanks broo!

@TheGeng1234 20 күн бұрын

HI bro finally i got it thank you for teach me, been trying to change from 2400 mhz to 3600 mhz, always black when changes on bios, finally now can thank youuu

@abdullahsaadat524 11 ай бұрын

Bro my display went dark. I thought my GPU is dead. Tried a lot of things. Then reset motherboard settings and it solved it. And then saw your video 🔥

@MrRemo1313 9 ай бұрын

You saved me, thank you so much !!!!! (black screen after trying too enable EXPO on 6000Mhz DDR5)

@tiny4x544 Жыл бұрын

VIDEO IS A BLOODYLIFE SAVER THANKS BRO ILY

@Heckmondwike 2 жыл бұрын

Thanks man it really help me my ram runs for 3600 and wasn't work. Works at 3333 mhz ty.

@kima0009 Жыл бұрын

i had this same issue when i upgrade my ram to 4 sticks 32gb running at 3600mhz. my cpu a ryzen 7 3700x could only do 4 sticks of 3200mhz. after i did this my games seems to stop crashing and all problems went away. make sure you just look up your cpu and see the max it can run

@solowheels6837 7 ай бұрын

Wonderful explaination, glad I came across your video. So here is what happened to me recently. Last week I purchased 2 16GB Rams & used it along with my 8GB Rams. Total 48 GB - 3200 MHZ using 4 slots. Everything was working fine but suddenly I received a BIOS update and did it. Now, I am not at all able to use my PC with XMP on. Instead, now I my not at all able to run my PC with even same memory RAMs (4*16GB). Requesting if you can revert and share your experience on what could have gone wrong. I am worried if I have damaged my MOBO.

@bingbongler6400 Жыл бұрын

I've got a strange issue where non GPU intensive games will freeze for a second and give me a black screen briefly before resuming like normal. I still hear audio while this happens too. I wonder if that could be related to setting the RAM to XMP?

@VeryTori 11 ай бұрын

I just upgraded my ram after a few years, and my old ram ran 3600 speed and DOCP (basically XMP) perfectly fine this whole time (Although I think I remember having to tweak with this back then too lol), and now that I have new ram in, I have to tweak with it again. Was getting blue screens before disabling DOCP/XMP, and now about to try this method again. I hope I will hit 3600 again, but I suppose I should be happy with any speed above what I have right now.

@munchmill14 2 жыл бұрын

@Maraksot78 I am having the same issues with the rams I bought which are for DDR5. One of the first rams I got first was XPG ADATA 32GB (16x2) 5200mhz which gave me the same issues in this video and the other was Trident G Skill 6000mhz, and I am using 12900k with ROG strix motherboard and still having these issues. They were brand new, and at first i thought the XPG was faulty so I got it replace with Trident 6000mhz but still had the same issues.

@evandbltime1374 2 жыл бұрын

Also have Trident 6000 mghz ram at CL 36 and the XMP isn't stable. Can't seem to figured out what to do. I have a feeling the memory controller can't handle it idk.

@TheGriefHD 2 жыл бұрын

I’m in the same situation

@snorfold 4 ай бұрын

Thx mate. My Ram run on 8000mhz but Windows crash. With 7800 all work fine !

@TheSiimur 2 жыл бұрын

OH MY GOD THANK YOU SIR! My heart almost stopped after I installed my rAm. I thought I damaged something lol absolute top saver! Ty

@Maraksot78 2 жыл бұрын

Good to hear the video helped you out. Cheers. :)

@TheSiimur 2 жыл бұрын

@@Maraksot78 Hey man, so this has worked obvs.. BUT, my pc randomly crashes without blue screen just freezes.. Theres no time on how long before it happens. Any ideas on fix? I was thinking lowering ram speed but my build should be well supported its original speed (i9 10850k, vengence pro 64gb ram 3600mhz, 1080 gtx)...

@koigee Жыл бұрын

@@TheSiimur That's also what's happening to me! I hope he can make a video about this... (Ryzen 3 3200, Radeon RX550, 8GB 3200MHz RAM)

@TheSiimur Жыл бұрын

@@koigee I found a fix. I just lowered mhz speed even lower but by a small amount and havent had any issues ever since! :) hope helps mate

@fabiotrp2 Жыл бұрын

solved!!!!!!!! THANK YOU!!!!!!!!! i have 2 16gb kingston fury renegade bench 3600, i choose 3500 next to xmp profile and it works fine!!!!!!! im happy to watched this video and you helped me!!!!!!

@fabiotrp2 Жыл бұрын

followed and liked

@2hstrikes 2 жыл бұрын

Could be just cheap RAM but could also be cheap motherboard that just doesn't handle well going higher even tho it might be in the official spec. Five years ago you could get top notch mobo for around 120-150dollars/euros now you need to spend 200 minimum to even get into overclocking RAM and CPU game, without PC randomly crashing and worst case not even booting. Learned this hard way when building first custom gaming PC but the extra 15-20% boost isn't worth it unless you care about extra 10FPS

@TTTac 2 жыл бұрын

Damn dude your like a PC Mr Rogers. I bought a cyber power PC build; I know I am a noob. I was afraid of messing with but now not so much. Ps I bearly found your channel its awesome.

@kedwyd6535 5 ай бұрын

Hey Maraksot78, One thing: I'm planning to enable XMP in my pc's BIOS, but I'm really scared of getting a black screen and having to open up my pc for a fix. My current ram speed is 2400mhz in Task Manager, but I did some research and found that my motherboard (H610M S2h ddr4) can support 3200mhz, my 16gb ram also might be able to get 3200mhz since I checked and its specifications are Neo Forza NMUD480E82-3200DG00. My cpu is also an i3-12100F which claims to support 3200mhz too. Will I be able to enable XMP in my BIOS (Gigabyte system manufactor) without having a black screen or any problems? Just wanted your help and thoughts on this before I do anything that can potentially prevent my pc from turning on.

@zineddinedoudah3613 6 ай бұрын

ty u soo much u saved me twice 1st for my headset won't connecte to motherboard 2nd my pc won't boot up properly when the xmp profile enabled for 3200mhz (my ram trident z cl16 18 18 38 3200mhz) i folow ur guide in 4:14 and i find 3000mhz is the best compataibilty and stable boot up.... sooo god bless u

@tyeueyu 2 жыл бұрын

thankyou, you just sorted my random crashes,

@evanmiller8931 Жыл бұрын

this fix worked perfectly! just stepped it down a speed and everything runs like a charm!

@joshbuck1234 2 жыл бұрын

ok i did this and my xmp still crashed but i found this video showing to trun on the PBO power boost overdrive and now my xmp is working like it should i have been looking for a fix for this for ever

@DelScully 8 ай бұрын

Im having an issue where I was able to run XMP 5600 ddr5 for the last year and my system is able to run much higher into the 7000's but randomly the other day it decided I cannot use xmp anymore or it boot loops then goes to the bios finally... Have no idea how to fix this issue and now its even saying in corsair it is only letting me use 1 ram stick to monitor or use with rgb because one is running expo and another xmp or something which makes zero sense...

@decm8 10 ай бұрын

I had this issue and I fixed it by switching from corsair vengeance to Gskill memory, PC works amazingly now at full rated memory speed.

@xxNickxx23xx 2 жыл бұрын

This video explains a lot about the problems I have been having lately with my system. I'm running into the same issues you are talking about but I have a 5900X with 3600MHZ ram that I have been using for about a year now and it was just fine up until recently. Now I have to disable XMP to get my system stable. Are you saying that now I have to downclock my RAM even though it should work with my CPU?

@finmacc 2 жыл бұрын

did you fix this dude i have a 5800x and was using xmp for about a year with no issues now i cant boot with it enabled

@slowzu512 2 жыл бұрын

@@finmacc yeah me to I have i9 11900k and 3600MHz ram and I put xmp prof 1 which speed is (3600MHz) and nothing dosnt boot black screen

@bovi_ 2 жыл бұрын

@@slowzu512 same here, any fixes yet?

@slowzu512 2 жыл бұрын

@@bovi_ no I just run it default at 2400 I can't run anything above that 2400 because it's doesn't boot

@everythingfilms Жыл бұрын

hey so I'v had my computer for a good while, have had my xmp and overclock applied for years and just the other day it blue screened which for me hasn't happened for a really long time, on boot it gave me BOOTMRG missing and then I had to reset cmos because my keyboard would not power on, once I did that everything booted fine. what I'm wondering is there a point when the xmp has been applied for to long and the motherboard won't take it anymore because I want to re enable the xmp profile and overclock I had on my cpu but have been struggling to figure out what actually made me crash in the first place because its been running stable for so long. also for the xmp profile, it only changes the timing's so would that effect it to that point?

@mlpdoctortardis Жыл бұрын

Omg thanx for this and after reading all the comments iv now figured out its defiantly my motherboard! I'll have to change at some point its the rog strix 470i gaming and I have g.skill 3600 with a new ryzen 7 5700g so CPU should be fine! Now what board should I choose not much choice in mini itx form 😬🙄 I do like Asus there software aisuite is very easy to use

@ShapelessKasai 2 жыл бұрын

Mine still isnt booting after trying both of these. And im worried about tbis because i only just got this computer a couple of days ago. I got a Ryzen 7 1800x, 16gb Corsair Vengeance RGB Pro 2666mhz and a GTX 1080. On an Asus Prime b450m-k motherboard

@Chwiqz 2 жыл бұрын

I have been crashing for months and now i saw this video and it worked. Why didn’t u do this video erlaier😩

@JSMedia38 Жыл бұрын

I'm running 32 gigs of DDR4 RAM on an MSI A320 Pro Max. The specs on the MSI website say that the board can run DDR4 ram at 3,200 MHz. When I try to run the ram at 3,200 Mhz I get random green screens and restart. I put the board in "Try it" mode and it ends up changing the ram speed to something below the rated 3,200.

@jovanandalan4998 7 ай бұрын

thankyou huhu i got my first build and literally change the dram freq from Auto- 3200mhz cuz its only showng 2133 instead of 3200mhz and then right after my screen wont boot up and i cant even get to bios which made me panicked huhu thankyousmch

@ronchampagne8484 Жыл бұрын

Great video . This is exactly my problem .i912900kf on asus prime z690a MB . Kingston fury ddr5 5600 .64gb installed (16×4) . The first thing I did was clear CMOS . It didn't work , still a black screen .

@Makingmoneyhabangnakaupo Жыл бұрын

any update on this? how did you fix it, i tried to follow the instruction but my pc still wont boot

@MrFreekyJ Жыл бұрын

@@Makingmoneyhabangnakaupo clear CMOS, removal all ram modules and only insert one stick into the A2 (second) slot. You should now be able to boot back into your UEFI/BIOS

@claudiopuggioni2972 Жыл бұрын

hi all, i have this problem: my ram goes 3600 xmp 1 and 3000 xmp2. i have a i5 12400f so i read that its max is 3200 (the multiplier?). how can i go for 3200? do i need to leave xmp 1 and modify the memory ref. clock? the mobo is z690 UD gigabyte ddr4 thanks

@ibizenco 2 ай бұрын

Old video, but still worthile. So, I was meddling in the BIOS of my gaming PC (with a R7 5700X and an ASUS 3070Ti on an (older) ASUS X370-A motherboard - and kudos to ASUS for offering BIOS updates so I was able to replace my R5 1600 with a R7 5700X, a couple of years ago). DOCP is enabled to get the 2 x 8 GB of DDR4-RAM (RGB, of course, or whatcha expect?) from 2400 or whatever to 3200 MHz. The BIOS showed a RAM voltage of 1.3-something Volt, in yellow. It says 1.2 V is the normal voltage, so I changed the DRAM voltage in the BIOS to 1.2 Volt (just because I could...) And "Elden Ring" has been crashing (hanging, then throwing me back to the desktop) during every run for the past few days... Changing the DRAM voltage back to 1.3-something made "Elden Ring" run fine (earlier today). Another example of, "If it ain't broken, don't fix it".

@justinbarrall7221 Жыл бұрын

Is system memory multiplier the same as memory frequency? I have an aorus motherboard, and it doesn't have the option for memory frequency?

@jenastaso884 5 ай бұрын

I build my new pc, everything starts but i dont get an image on screen, no bios no windows etc. the dram led on my mainboard is on constant orange light, i have a Asus Z790 F Mainboard, DDR5 Corsair (2 x 32 gb) 6000mhz Ram ( c30) and an i9 13900k on the website for the mainboard i found it supports the exact same ram but instread of c30, it sais c40 does this small difference really makes my pc not working ?

@kami_sama0803 2 жыл бұрын

guys remember the ram sticks go in A2 and B2 if u want the xmp profile to work properly for duel channel

@Jaihso Жыл бұрын

Amar. youre the fucking man.

@begelston Жыл бұрын

That was the key; the ram was in the wrong slots - thanks!

@thetruthhurts5902 Жыл бұрын

What if you have all 4 memory slots filled? Mine keeps blue screening even after dropping the speed :(

@kami_sama0803 Жыл бұрын

@@thetruthhurts5902 i don't know the answer to your question, hope you find a fix tho.

@begelston Жыл бұрын

@@thetruthhurts5902 Check that all four Dims are seated snuggly. If that doesn't help, isolate the ram by testing a 1 dimm configuration, trying with each dimm to see if one is bad. If that works then try combinations of 2, etc. Your motherboard documents will tell you which slots for each set (1,2,3, or 4 dimms). If it isn't the ram then it could be the motherboard or possbily the bios.

@AzconaXD Жыл бұрын

Hey thanx sooo much the XMP disables work perfect u the best thanks for video

@theunboxnetwork 2 жыл бұрын

12900k says it can only run at 4800mhz ram, so why buy 5200mhz kits if it cannot run stable at advertised speeds.

@matthew7972 Жыл бұрын

I’m having issues with raising my rams mhz from 2133mhz to 3600mhz. I have a 5800x3d cpu and my mobo is a ASUS dog strix b550 f gaming. My ram is 32GB (2x16) 3600mhz (G Skill Trident Z Neo). I change it in BIOs and it forces me to boot into bios every time. I enable the XMP (DCOP) and select 3600mhz. I don’t know what else to do. I have the most recent up to date mobo bios

@giannis7707 Жыл бұрын

Wow ty very much, very helpful video i got a question tho, can this also cause pc restarting in rare occasions? Shall i be worried that its not from xmp?

@cubancucumber Жыл бұрын

Saved my life. I just installed 32GB of RAM. My games run smoother than butter now its insane.

@Griffin-ir8tn Жыл бұрын

What mhz was it set at and which one stopped the problems for you?

@FrannB 2 жыл бұрын

Hello good video man! btw, I am experiencing some crashes where my screen goes black and I have to turn off the PC, it happens when I am gaming or in the desktop, I thought it was a temperature problem, but no, I check the rams for problems but nothing appeared, I also check the storage but nothing... what confuses me is that it can happen whille gaming or not gaming and the problems apears like twice a week only... I don't now what to do!!! Im thinking tha can be my HDD but I already test it... maybe when it reads a part of the disc it crashes idk.

@Jxspur 2 жыл бұрын

Same exact issue, any leads?

@banforaesinu20 Жыл бұрын

Same here

@swoosh5889 9 ай бұрын

do you solve your problem?

@FrannB 9 ай бұрын

@@swoosh5889 I think so... I took out the gpu and put it back again and that solved the problem... it looked like it wasn't well fitted.