Massey Ferguson 135 Multipower # 3 Removing the Lift Cover

Рет қаралды 71,175

4 жыл бұрын

Hello Im Lance (aka Bundy Bear) and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advise to customers.
Parts seen in our videos can be purchased from www.queenslandtractorspares.co...
We have a lot more than we can offer on our web site available to us and in our store. If you dont see what you would like please email info@queenslandtractorspares.com.au and we will help where we can.
I do try and help with technical advise at bundybearsshed@gmail.com if you have a question or are having trouble with your project.

Пікірлер: 48

@huseyincekindir582 4 жыл бұрын

Hello Lance, I'm Hüseyin from Bergama, İzmir, Turkey. Firstly, I appreciate you for your information in your perfect KZfaq videos. Mechanics say that you can not do this yourself or this machine can't be repeired but you make it possible for me thanks to your videos. Thank you so much for all these. I have a problem to ask you. I have a tractor, 1969 Massey Ferguson 135. Its problem is that hydraulics is not working properly when I declutch. Although a lot of people say that this work is so hard and even mechanics can not do that. After my searches, I set to work. I repaired and changed a lot of worn and eroded pieces of my tractor that also involved hydraulic pump. While I am doing these, you started to repair the same model and system tractor, so I was happy so much for that. Because in the videos I watched and my a lot of searches, I couldn't find hydraulic lift setting and repairing on this model and system. Despite I wasted my time, I saw that you didn't show setting hydraulic lift in your Massey 135 tractor in your videos. Do you have a video about that or didn't you make this video? I am looking forward this video. Because I tuned up according to other videos but they aren't same with my tractor. So I think it isn't working properly. I wish you continued works and take care of yourself.

@BundyBearsShed 4 жыл бұрын

G Day Huseyin, No I didnt do a video on that yet as on the 135 6 speed I just took the top from the 135 Multipower and used that as it was working well and it was cheaper than repairing my old one. I will do one one day but not at the moment Im sorry.

@huseyincekindir582 4 жыл бұрын

@@BundyBearsShed thank u for replying, Lance.

@youngfleet2507 Жыл бұрын

thanks man i learn alot from you sir

@BundyBearsShed Жыл бұрын

Thanks, Thats why I do the videos.

@AbdulKurad 4 жыл бұрын

Good job Sir thanks 🇮🇳👍😁🚜

@BundyBearsShed 4 жыл бұрын

Thanks Abdul

@AbdulKurad 4 жыл бұрын

@@BundyBearsShed you welcome sir 🇮🇳😁

@jembo1959 4 жыл бұрын

Thanks Lance another great video.

@BundyBearsShed 4 жыл бұрын

Thanks Jimmy.

@charleshart6992 4 жыл бұрын

The Multipower internals sure look good!

@BundyBearsShed 4 жыл бұрын

They do indeed,

@danebruno4238 3 жыл бұрын

A tip: you can watch series at Kaldrostream. Been using them for watching lots of of movies recently.

@devonkenneth7763 3 жыл бұрын

@Dane Bruno Yup, been watching on Kaldrostream for since december myself :D

@projectponderer Жыл бұрын

Thank you for another great video! Question: I have a 135 that has a hydrolic hookup under the seat. But can't find out what fitting it is. Would you happen to know what it is?

@BundyBearsShed Жыл бұрын

I think it would be 3/8" BSP

@seekanddestroy1981 2 ай бұрын

Hello, i am looking for the part called Pressure Control Valve for the Massey Ferguson 152 tractor, în your video the part is on Lift Cover, the one with orange color. Can someone help me find that part, because I've been looking for it for a ling time and I can't find it anywhere to buy it.

@BundyBearsShed 2 ай бұрын

Try genuine AGCO

@tayr_tayr Жыл бұрын

good day.. I follow your videos with admiration..our tractor is Massey Ferguson 148 Spanish.. we have a problem like the video in the link I posted below. When the cultivator is attached, the hydraulics should rise up to a certain level and go down automatically, but it continues to rise. What could be causing the problem? I would be grateful if you could help.. thanks..

@BundyBearsShed Жыл бұрын

I would pull the rh side cover and see what is going on in there, that might give you a clue.

@trevorhannon900 3 жыл бұрын

we are getting one of these for our cottage. Its our first tractor and I have been trying to find out if auxiliary hydraulics can be added?

@BundyBearsShed 3 жыл бұрын

If it is a multipower yes it is there ready to go, If not a mulltipower it can be done but it has to be done a different way. There is valves you can buy to set it all up.

@trevorhannon900 3 жыл бұрын

@@BundyBearsShed its a 3spd non synchro

@rayseals8764 4 жыл бұрын

Mf 180 backed Bush cutter in to a dirt bank, 3 point stoped working. New pumps, everything just rebuilt before this happened. Any suggestions. Thanks

@BundyBearsShed 4 жыл бұрын

G Day Ray, Possibly the little roller or the rivet holding the arm on the control valve may have come off. Check by removing the r/h side plate and working the valve by hand.

@rayseals8764 4 жыл бұрын

@@BundyBearsShed did that and 3 point works when you push back on the lever. Roller in place as it should be. No response to the levers. Thanks lance (massey club meetings include lots of bundt quotes)

@BundyBearsShed 4 жыл бұрын

@@rayseals8764 That tells us the top cover needs to come off and the rollers in the top cover need to be looked at as you have just proved the hydraulics are working.

@rayseals8764 4 жыл бұрын

@@BundyBearsShed thanks lance

@rayseals8764 3 жыл бұрын

We pulled the top cover finally and are stumped so far. Tomorrow will go looking for parts in bottom of the trans.

@neonlimitless9328 3 жыл бұрын

Hello my multi-power MF 148 won’t lift anything for some reason. Do you know what it could be? Thanks

@BundyBearsShed 3 жыл бұрын

Start with oil and filter first then see if the control valve is working.

@FarmersCode 4 жыл бұрын

Hi! Is got a MF 133 and the lift arms are bouncing when i use them... do You now what it could be.

@BundyBearsShed 4 жыл бұрын

Yes in position control it will try to maintain a steady level. If the main piston is leaking or the O rings on the stand pipe are leaking it will lower slightly then it senses that and tries to maintain the level you set the lever at. The easiest and cheapest thing to look at is the stand pipe o rings. The 135 6 speed restoration fitting the lift cover might show you where the stand pipe is. or email me on the bundybearsshed@gmail.com if you get stuck.

@FarmersCode 4 жыл бұрын

@@BundyBearsShed i removed the lift cover, and the hydraulic pump. Pump is wrecked. The pump that i pulled out was a M1 pump and my replacement is a M2... wil it stil work? All the dimensions are the same.

@jassemali4254 Жыл бұрын

❤🎉

@BundyBearsShed Жыл бұрын

👍

@kingkazim4129 2 жыл бұрын

Do u have any videos on MF 290 hydraulic repairs

@BundyBearsShed 2 жыл бұрын

No I dodnt , never owned one to play with.

@bmw2953 Жыл бұрын

Καλησπέρα έχω ένα ίδιο δεν μπορώ να το κάνω να δουλέψει άλλαξα καπάκι γιατί έσπασε δεν ρυθμίζω κάτι καλά δεν ξέρω μπορείτε να με βοηθήσετε.. ευχαριστώ πολύ

@BundyBearsShed Жыл бұрын

I have not done the video yet on a lift cover but just bought the genuine tools so hopefully it wont be too far away.