MrGreendragon3 ..love mf35..but what is this great tune called?

MrGreendragon3 wiring ko Lekar koi video bnao bhai

thanks for watching Julian , best of luck with your restoration .

thank you localsheriff 1977 , it came out really nice for sure , stay tuned for my next video coming soon , i think you will like it .

thank you sir , best of luck with your new purchase

I rode on my grandads lap 50 years ago. He had a 57 model 35 Ferguson. I plowed many hours with it as a teenager. My dad now owns it and restored it about 20 years ago. Now he mows his property with it. I drove it a few years ago after not running it 30 plus years. I remembered how to choke it, start it, set throttle and run PTO. It made the exact same sounds and had the same exhaust odor. Funny how we don’t forget sounds and smells. I have next dibs on it, even if I have to park it in my driveway. Ours has a hunter green chassis with Kahki colored body which I believe was only used for one model year. Lots of grey and red ones but I’ve never seen another Khaki colored one.

A 4wd mf35? That must be the king of all tractors!!!

Peter Mashak thank you Peter 👍

Music wasn’t that bad

@@andrewdavies438 Yes it was.

thank you James , i appreciate your comment , makes all the hard work worth while , if you get a chance check out my other restoration videos , i have some new ones coming soon .

كام حصان 🐎والاستفسار ازاي

thank you sir .

thank you sir im glad you like how it came out . you might have some interest in my latest video of a massey ferguson 135 tractor , its in two parts and it ends up in industrial guise as it left the factory , lot of work went into it but it came out really nice , im just editing part two right now . thanks for watching . best regards terry .

thanks lad , mighty wee yoke for sure , not our tractor unfortunately , done her up for a neighbour .

@@Mrgreendragon3 The neighbour must be happy! My neighbour uses his 35x for drawing silage so no wonder she's a wreck. Mighty tractor to still keep going!

thanks Joe , few hours gone into her but she came out well .

thank you niclas , this one came out really nice , i have recently restored a MF 20 / 135 Massey Ferguson , look out for the full restoration video coming soon !!!

thank you Richard .

thank you Robin , i got the " clam shell " mudguards from MPA spares Belleek co Fermanagh , northern Ireland , if you google them they will come up and they are very easy to deal with , you can tell them i sent you , they were not expensive and are the correct mudguards for this era tractor , they are very easy to fit using long bolts which locate either side of the rear axle . thanks for watching .

Thank you my new friend!!!

I think he will see his money back eventually. I bought a 35x 20 years ago and it has just continued to work with not much needed. The way prices here in the UK have gone I wish I had had the foresight to by several others back then. As for having an emotional connection - sure - I wouldn't part with my 35x - it would be like selling a grandmother.

thank you , im glad you enjoyed it .

thank you

thank you Raja and happy new year to you and your family , thanks for watching .

@@Mrgreendragon3 thank you sir. May God bless you and your family stay blessed and happy new year from Pakistan watching you.

merci Francis Dublé, c'est presque trop dieu pour travailler maintenant !! merci de regarder et de consulter mes autres vidéos de restauration de tracteurs sur ma chaîne.

thank you sir .

thanks Johnny .

hi Charles , thank you for the kind words , we source all our parts from MPA spares Belleek , co fermanagh , and QTP tractor spares ltd Ireland . hope this helps , stay tuned for another video coming soon .

On the Body and the tinwork That is

Clean it and treat rust if you can remove any other paint and just sand it a bit.

We had a roll bar but took it off

thank you Mario

thats right randy , a real workhorse and the mainstay of most rural irish farms for years .

Thank you mario 👍🏻🚜

hi thanks for watching , the oil breather should slide up through the hole in the bonnet , there might be a clip of somewhere that needs to be loosened first .

@@Mrgreendragon3 ok cheers

thank you GUY , apologies for the music it was all i could download without a copyright strike from you tube !! unfortunately i dont have any audio of the tractor running but trust me she purrs like a kitten , thanks for watching and please check out my other tractor restoration videos on my channel .

merci pour vos aimables mots, je suis nouveau dans la réalisation de vidéos et je n’étais pas assez confiant pour faire une voix off, je le ferai peut-être sur ma prochaine vidéo qui est une restauration complète d’un système complet de restauration d’un MF 20 industriel jaune 135 massey ferguson, séjour à l'écoute et merci de regarder, n'oubliez pas de commenter, noter et vous abonner pour un meilleur contenu. Je vous remercie .

thank you sir , this took roughly 3 months to complete .

@@Mrgreendragon3 well done 👏🏻

i don't think so , it was butchered on years ago , its belonged to a neighbour we just did it up back to factory spec for him , he didn't want the rotten cab and cant say i blame him , your 345 will come out as nice hopefully . regards terry .

@@Mrgreendragon3 thank you it does look better without the cab my dad used to drive a 35 but now he drives the 135 in the cold start video on my channel

i will be sure to check them out , thanks for watching and do check out my Massey ferguson 135 restoration , its in two parts but i think you might like them , link here kzfaq.info/get/bejne/ZqtpgJSjrrnSiZc.html

it took us the guts of two months all in and roughly €4,500 euro,s for all the parts and labor .

MrGreendragon3 *Great Job*

a couple of 4 inch grinders with wire brushes attached , slow dirty work but less harmfull than the dreaded sandblasting, thanks fot watching Peter 👍👍

Did you use the wire brush to clean down the tractor before paint

@@bobgallaghar4716 yes peter , as you can see in the video what we do with all of our projects is to strip the tractor right back to nothing then a de-grease and pressure wash then wire brush everything to get it as clean and rust free as possible then maybe another wash and start prepping for paint . slow tedious work but the results speak for them selves as you can see in some of my other videos . thanks for watching .

MrGreendragon3 when you wash around the engine area will you damage the engine or wiring thanks

hi Fred ( any relation lol ) its been a few years since we did the restoration but if memory serves me correctly it is fitted to the front axle stay bars that connect all the way back the foot plates . thanks for watching .

@@Mrgreendragon3 brothers my friend! thanks for the info

It was a Ford cab. MF 35 was never offered a cab. A heathouser option, yes, but not a full cab. You could look and tell it was something somebody jury-rigged on there.

Ken Arnold our 35 has a duncan cab on, and it was put on it when the tractor was made in 1959 in bannerlane

This looks like a Sekura cab, was and aftermarket cab fitted to 35s and also 135s and others. I believe that Sekura supplied custom brackets and panels to suit MF 35, etc.

yes we do .

@@Mrgreendragon3 ah class Been thinking I need the old mf35x brakes and perhaps add a few hydraulic spools for the rear. Displays and lights fixed. Thing’s to be straightened up But keep the old patina look :) Should it be something I learn and do or just pass on to those who know, that’s the dilemma lol Are you Based out of Connaught, Leinster, Munster, Ulster ?

thanks darragh , she came out well alright , the owners choice to have the roll bar and he does a lot of road work with her so safer too , i prefer them without the bar too but not my tractor unfortunately .

MrGreendragon3 I'll hopefully be getting a Massey 135 soon b able to go on the tractor fun when I get my license

we recently restored a Massey Ferguson 135 but we put it back into the yellow industrial finish as requested by the owner , she came out nice , im trying to get a video together of the restoration so hopefully it will be coming soon .

MrGreendragon3 hope so would like to see that

Could be used for cattle trailers, small car trailers or weed lickers plenty of uses on a farm for a ball hitch

thanks hawkdaddy64 and apologies for the music , unfortunately they do not pay me ha ha but i thought the video would be boring and long without some accompanying music , i will try to source something more upbeat the next time , or you could always mute the video lol . thanks for watching and check out my other tractor restoration videos on my channel , naff music included .

I actually enjoyed the music, plus it's non copyright © so he won't get the video taken down

Just subscribed, I too am pimping a 35X

thank you , i will keep this in mind for my next video .

सॉरी भाई मुझे नहीं पता कि आपके देश में पेंट कहां मिलेगा, मैं आइरलैंड से हूं। मेरे वीडियो देखने के लिए धन्यवाद।