In this video you will find all you need to no when servicing your Massey Ferguson tractor.
Пікірлер: 45
@trevorsidley76973 ай бұрын
Remembering the days when the only things you need for servicing (apart from the replacement parts and fluids) was a brain and common sense. No Laptops or chips. Great Stuff Richard.
@ianrobinson95652 ай бұрын
Even after 50 years of working with machinery and massey ferguson tractors I can learn from your experience and way of doing things. I also do generators and regulators as an extra, was trained in electrics. CHEERS 😊
@peterireland21223 ай бұрын
Its a smart little tractor, loved the way you shot onto the footpath.
@bobcrawford21053 ай бұрын
Good to see drain plug had a magnetic tip to hopefully catch any iron filings floating around in oil
@brianogrady79003 ай бұрын
Great vid buddy keep em coming
@m0ogy3 ай бұрын
Thanks for a great video, I did mine last year (fully restored 1958 petrol 35) 🙂
@stephenfox51333 ай бұрын
Great video lads.
@ebptube3 ай бұрын
Very good and thorough!
@PaulJohnson2573 ай бұрын
Good to hear from you again, hope you’re doing well
@Mr_b_yorkshire_farmer3 ай бұрын
Yes doing ok thank you.
@jonojohnson18103 ай бұрын
Excellent video old lad and can I get my cap back at some point hahah
@andrewturner87553 ай бұрын
Great Video Richard & a great Camera man Lenny, jammy bugger with the bleed up lol, hope my Rolls bleeds up has good.
@Mr_b_yorkshire_farmer3 ай бұрын
Give me a shout if you need a hand.
@andrewturner87553 ай бұрын
Thank you Richard
@CarlosRodrigues-zc3mx2 ай бұрын
Muito bom ,gostei do caprixo parabéns
@brodiepentland13 ай бұрын
Great video. Can you do a zerk tip video sometime pretty please for massey 35?
@vehicle_entrance3 ай бұрын
Do some service work on the TEF as well please
@gogisingh5111Ай бұрын
👍👍
@Fireman9ify3 ай бұрын
She is a beauty
@DRUMBAUN3 ай бұрын
Have you done a video on wiring up the lights? I've a 35 with front and back lights but not wired in yet.
@Mr_b_yorkshire_farmer3 ай бұрын
I have not no. I can do one tho when It comes to wiring up my 65. Thank you for the thought
@johnchambers16863 ай бұрын
not herd from you for a wile hope you are doing well are you still on the farm pal
@markwright31613 ай бұрын
6:08 Have you heard of a dip stick having 3 lines on it? We have a Ferguson 35 (grey-gold) and it has 3 lines and I have no idea what level the oil should be pre-cold start. It's a 4 cylinder diesel believed to be a very early one, with a suggestion it was the 8th one built if I'm recalling correctly from when it was bought some time ago now. Poor health means the person who used to service it doesn't any longer, but I think they just filled it to the top line so I can't be confident that's right (other shortcuts like engine oil in the transmission/hydraulic system of other tractors was also common practice). It's a working farm tractor still, but has developed a thick 'anti-corrosion' coating that I can't be sure hasn't come from overfilling.
@Mr_b_yorkshire_farmer3 ай бұрын
It dose not come to mind. There are three makes on the dipstick on the tractor in the video but I guess you mean there is something different. I almost said in the video I only use the lines as a guide. It is not necessary to keep them on the top mark. No I am not saying for one moment to not check it. Or even add oil. But I have found over the years that an engine will find its own level. That level can be anywhere in the lines. With modern tractor oils you just have to be careful with the additives that they now put in with the oils.
@markwright31613 ай бұрын
@@Mr_b_yorkshire_farmer Yes, it's different to the one shown. For that time stamp, the lines across the dipstick are vertical lines due to how it is being held obviously. The dipstick our 35 has has 3 of those lines without any other markings. They're not accompanied with the 'MIN' and '
@hansdk0073 ай бұрын
Who supplies the old style CAV filters?
@Mr_b_yorkshire_farmer3 ай бұрын
Queensberry tractor parts
@espenhaga23753 ай бұрын
Is it possible to fix a leak from the main rear if replacing the seals? I have tried once, but still a minor leak. Any tips?
@Mr_b_yorkshire_farmer3 ай бұрын
In the past when I have had a new seal fail there has always been another problem causing it. Like too much where somewhere. Also I find it no help when vehicles are stud for long periods and the seals become flat and once warmed though they then work
@Gearoid353 ай бұрын
Nice video, where did you get the chrome bits, you should wear disposable gloves when handling waste oil and diesel.
@Mr_b_yorkshire_farmer3 ай бұрын
Agreed but gloves can also be just as harmful I find from sweating opening your pours and allowing spilt oils into your skin. It all depends on the persons hands in question
@Gearoid353 ай бұрын
@@Mr_b_yorkshire_farmer that's a very nice 35x
@Mr_b_yorkshire_farmer3 ай бұрын
We had the chrome but done. That’s my dad’s obsession
@buzzbee648826 күн бұрын
should fill the oil filter with oil b4 for you install it 😢
@Mr_b_yorkshire_farmer26 күн бұрын
The correct procedure is never to pre fill a filter with oil to avoid any contamination
@reachforthesky18493 ай бұрын
I have been filling up the centre section of the oil bath bowl for the last 35 years! Am I wrong?
@Mr_b_yorkshire_farmer3 ай бұрын
If I am honest. I honestly do not no? As far as I am aware you fill the outside.
@Ian-Steele3 ай бұрын
I am sure you have to put oil in the centre section so that the oil is directly below the downward flow of air and it catches any dust particles. The top of the air intake has slots cut in it to make the air swirl around as it’s drawn down in a cyclone effect.
@bonnydog19593 ай бұрын
Oil should be in the centre of the bowl. That's why the holes are there to let it in.
@Mr_b_yorkshire_farmer3 ай бұрын
At the tractor club tonight. They all say you fill the outside.
@reachforthesky18493 ай бұрын
Thanks for asking. The plot thickens!@@Mr_b_yorkshire_farmer