MASSO Closed Loop Stepper Motor

MASSO Closed Loop Stepper Motor - Episode 30

Рет қаралды 9,257

Күн бұрын

Пікірлер: 26

@michaelkeymont501 2 жыл бұрын

Oh boy, now I need to get these... I’ll need 7 of them to cover both machines. Pity about the 36 volt max - all of the power supplies for my existing 425 oz/in motors are 48v... Unrelated, but for anyone considering Masso, I recently passed 1000 jobs run on one of my machines and the other isn’t far behind. These things are reliable as hell. Tool changes without having to manually re-zero in between is priceless. Start a job one day, finish it the next... priceless. I went from hobbyist to being a full time manufacturer in about a year. Great presentation skills as always, Peter.

@cncnutzmassoedition9131 2 жыл бұрын

That's great. Hobby to full time job. Glad it's working reliably for you. Cheers Peter

@buildmotion1426 2 жыл бұрын

Nice to hear. I just got my Masso up and running. Now I'll likely get the closed loop system.

@samrix5793 Жыл бұрын

By tool changes in between do you mean you have an atc spindle?

@testyourdesign233 2 жыл бұрын

Looks like a nice piece of gear. Nicely done Peter.

@cncnutzmassoedition9131 2 жыл бұрын

Thanks Stephen

@DaveGatton 2 жыл бұрын

Great job Peter. 👍

@cncnutzmassoedition9131 2 жыл бұрын

Thanks Dave

@772777777777777 7 ай бұрын

Can you do a clear path setup video

@samrix5793 9 ай бұрын

What thickness cable needs to be used?

@paulelliott6655 2 жыл бұрын

Are these suitable for Z axis. As i have seen closed loop motors do not have a holding capability when the power is turned off. So is it possible the Z axis can drop when the machine is not running

@cncnutzmassoedition9131 2 жыл бұрын

A closed loop stepper motor has exactly the same holding as an open loop stepper. You may be thinking of servos which have not detent to them so move very freely. Cheers Peter

@dankafun4854 2 жыл бұрын

Peter...what type and gauge of wire is recommended for hooking up the signal side and the power side..

@cncnutzmassoedition9131 2 жыл бұрын

I suggest Cat 5 or Cat 6 Patchlead wire for the Data as it is multi strand, flexible and differential signals should be in twisted pairs and that cable have well defined pairs. I'm talking patchlead cable not building cable. Is is available in shielded. I suggest 0.75mm² cable for the power. Cheers Peter

@dannybradley5192 2 жыл бұрын

@@cncnutzmassoedition9131 do you use 3 cables? All 8 wires in a cat 6, pairs to each, to the signal and directions , then another cable for the en and al, then another for the two power?

@Z-add 2 жыл бұрын

Are these rebranded chinese motors?

@brayanr9240 9 ай бұрын

Everything is lol

@772777777777777 7 ай бұрын

Does masso support technical servo

@robguyatt9602 2 жыл бұрын

Are the motors bipolar or polyphase?

@cncnutzmassoedition9131 2 жыл бұрын

I don't actually know and it really doesn't matter. The only way of finding out is to disassemble it. Cheers Peter

@urgentcareguy3 2 жыл бұрын

Mostly schizophrenic with bipolar tendencies ; )

@robguyatt9602 2 жыл бұрын

@@urgentcareguy3 You win! LOL.

@robguyatt9602 2 жыл бұрын

@@cncnutzmassoedition9131 Not so. Polyphase or 3 phase motors are much quieter than bipolar. No need to pull them apart. The specifications will indicate the number of phases.

@robguyatt9602 2 жыл бұрын

@@cncnutzmassoedition9131 By the way, I design and manucfacture servos. I only use servos on my cnc machines because I can't stand the noise of steppers. LOL. How's that for biassed. LOL. By the way again, I'm currently assembling a new lathe. It has servo driven spindle and tailstock as well as X and Z axes. This is the same as my current smaller lather. But I'm adding live tooling to this new one. A Masso is not yet purchased but will be soon. The biggest factor in the decision to go Masso, is your series of vids.