Mastering Small Knife Sharpening

Рет қаралды 7,478

Жыл бұрын

In this video Sedge teaches BigD how to sharpen small knives utilizing the Tormek T8 small knife jig .
Be Positive & Stay Sharp !!!!!
SVM-00 Small Knife Holder - Tormek
bit.ly/3XB1HFW
Tormek T8: bit.ly/3DEFZpW
@TormekSharpening
#tormek #sharpening #handtools
Affiliate for :
TSO Products : tsoproducts.com/?ref=cwmk4ofe
Kaizen Source : www.avantlink.com/click.php?t...
Taylor ToolWorks : lddy.no/1eoy5
DISCLAIMER - As an Amazon Associate I earn from qualifying purchases.
Chris’s AV Gear:
Panasonic 4K Ultra HD: amzn.to/3pXXPzX
Rode VideoMic GO : amzn.to/3vXOJqx
Sony MDR7506 Headphones: amzn.to/3I450g5
SanDisk 256 GB Extreme Pro SD Card: amzn.to/3i0iT4u
SedgeTool is all about woodworking and having a great time doing it. SedgeTool is Brian “Sedge” Sedgeley who brings 30 years of woodworking experience and tons of energy to the team. Derick “Big D” Clements who has NO CLUE about woodworking but is ready to learn. Chris "cameraman" Seibert who films it all! If you want to have a good time and learn something about woodworking, then you’ve come to the right place.
All views and opinions expressed during SedgeTool are explicitly those of SedgeTool. They are not intended to represent any claims, value statements, or opinions of any of the tools, brands, subsidiaries, or parent companies of brands referenced, visible, or mentioned on the show. The SedgeTool team is here for entertainment and educational purposes only. SedgeTool is not a replacement for proper training or safety guidelines as outlined by the manufacturer's owner’s manuals.
Website: www.sedgetool.com/
--------
Instagram: sedgetool?...
--------
Facebook: / sedgetool
--------
Tik Tok: www.tiktok.com/@sedgetool?lan...

Пікірлер: 16

@irakopilow9223 Жыл бұрын

I wish I would have seen you knife sharpening tip years ago. I made the BIG mistake of swinging my arm at the end. I turned a paring knife from beautifully curved end to an ugly wedge that looked more like an xacto #11 blade. Thank you for this Public Service Announcement.

@sedgetool Жыл бұрын

Thanks Ira !!

@PatLap Жыл бұрын

Great minds! I just sharpened my carving knives on the Tormek! 😅 Great Tattoo Batman! 🤘🏼😊

@sedgetool Жыл бұрын

Rock on!

@plumbum6558 Жыл бұрын

@@sedgetool nothing like showing the world your middle finger first thing you see on KZfaq before you hit play to funny lol 👍

@ronsellew5696 Жыл бұрын

I didn't expect a video this quick but thanks That helps me a lot. I'm now subscribed!

@sedgetool Жыл бұрын

Thanks Ron !!!!!

@lmallard3788 Жыл бұрын

Interesting video. I bought a tormek t8 with small knife jig accessory kit the same day I bought a festool sander and a festool dust extractor. I have used the sander and extractor but not the tormek. I need to get busy. Thanx for your videos!

@sedgetool Жыл бұрын

no worries ...

@JamesFunkify 5 ай бұрын

Hey Sedge. Have you tried sharpening a pocket knife with the small knife jig? I've got a Buck and due to the body shape (basically an oblong rectangle) the SVM-00 doesn't work. The knife flops around because the jig is made for a rounded handle. Have you come up with a solution?

@sedgetool 5 ай бұрын

I will look into it ...Thanks for making me aware of this !!

@GuitarNTabs Жыл бұрын

Hi Sedge, We've been in contact before, about the DF500. Sorry to post on this video, but I really need your assistance... I hope you can help me, because I've a few issues... I'm building a piece of furniture, which is 16 mm in thickness. All corners are mitered, 45 degrees, and I planned on using the 5x30 domino. I tried this today, and the domino went through... What's the catch here? I set to the DF500 like you've shown on KZfaq, with the bevel first, bottom out the gauge and push down the height, still went through... Is 16 mm too thin for the 5x30? When the 5x30 didn't work, I switched to the 4x20, and it didn't go through, but when I assembled a joint, it wouldn't meet up properly... It's offset about 1mm, even though I used the same reference face, for both cuts?? 🤔 What's the deal here? I really hope you can help me out, because I'm about due with my project... 😔 Thank you, Best regards.

@sedgetool Жыл бұрын

16mm is too thin for the 5 x 30 . I always have used 18mm for the 5 x 30 the 4 x 20 is the proper domino to use ... i really do not know why you are getting a 1mm offset if your fence is bottomed out... always set your bevel first then bottom out your plate height. i hope this helps.

@swingbelly Жыл бұрын

Hi guys! Thanks for your great videos on blade sharpening with the Tormek T8. Extremely helpful. I just purchased my T8 and as a novice, I learning the techniques and patience in obtaining extremely sharp bevels. This machine is fantastic and so versatile for all types of blades. Do you recommend a honing paste/compound to substitute for the rather expensive Tormek brand? Thanks and "Stay Shaap". Norm from "Torono" (Toronto), Canada.

@sedgetool Жыл бұрын

I use the Tormek paste on the leather wheel.....been using it for 2 years and not even close to needing a refill...lasts a LOOOOOONG time !!!

@swingbelly Жыл бұрын

@@sedgetool yah, but when you are done with that tube, (2 years you said), will you be looking at alternatives?