Today I would like to introduce you to a very successful product Materix 7.0 Effetto Metamorfica.
PRELUDIO is a universal primer for decorative wall design, equipped with wet abrasion resistance and good permeability for water vapor. Suitable for various surfaces, such as classic and premixed concrete, plasters, plaster, wood ..
The product meets the high quality!
Processing: with roll
Dilutable with water: 20 - 25%
Drying at 20 °C: After approx. 4-5 hours
Consumption: PRELUDIO: 8-10m2/litre.
Materix 7.0 Bianco W. White lime filler for indoor use to achieve a unique decorative surface. The homogeneous and soft product is easy to use and can use the right application technique to effect the Roccia Metamorfica (Broken Stone Effect) and Roccia Rigata effect.
Underground preparation: the substrate must be dry. Clean the surfaces to be treated and remove loose or peeling parts. Apply a layer of PRELUDIO to 25% diluted with pure water. After about 4-5 hours at 20°C continue with the application of MATERIX 7.0 Bianko W. In the case of the old and brittle substrate, it is recommended to first dilute a layer of deep base concentrate with pure water before PRELUDIO, apply.
Consumption MATERIX 7.0 Bianko W: approx. 1.7-1.9 kg / m2
Materix 7.0 Bianco W - 4 litre filler in white + (120 ml Color Kit R) in black
Drying time approx. 2 hours. Afterwards, a little water sprays on the wall and the processing becomes lighter and softer. After about 24 hours at 20°C continue with the application of Kalahari micron Alluminio 03.
KALAHARI MICRON: Consumption: approx. 6 - 8 m2/litre
With a suitable sponge, apply the Lasur Kalahari micron Alluminio 03 thinly and evenly. Continue using SHINE R-5° after about 3-4 hours at 20°C. SHINE NEUTRAL 00: Dilutable with water: 2-3%. Consumption: 200-250g/m2.
Mixing ratio: mix 80 ml Color Kit R to 1 litre (1.35kg) Shine neutral 00. Then dilute with 20-30g of water and apply to the wall (see also our video guide). Apply the Shine R-5° with a suitable sponge. After about 3-4 hours at 20°C continue with the application of Kalahari micron Alluminio 03.
The second and last layer Kalahari Glaze! With a suitable sponge, apply the Lasur Kalahari micron Alluminio 03 thinly and evenly. Drying time approx. 4-5 hours at 20°C. Finished!!!
Practical advice: the ambient temperature should be 5°C to 35°C during painting and the relative humidity of the room should not exceed 80%. Avoid direct contact with eyes and skin during application, use clean water for dilution and store the undiluted product in a closed container