I know it might be a pain in the ass, but borrow Tim’s a PSC sensor Sony and throw his 50 mil macro lens on there and just put it on a tripod next to the peep so we can see how you’re tying in the peeping a D Loop when you’re doing it.

I’m a mechanic and teaching someone how to do the things you do everyday takes the patience of Jobe! Very well done and really enjoyed watching!

Awesome job! I’m gonna make my way there from NY. When I buy my new bow. Thanks MFJJ.🙏🏽

I love these types of videos. I tend to learn more from them. I think because it's slowed down a bit more, but you should definitely do more.

Watching you put that piece of loop string in the bow string to set the timing was just amazing to see. Something that simple to do is something to witness for myself in your bow shop awesome video.

Man I wish I lived in Spokane Washington. You have the most cool bow shop and not to mention a great personality!

That's what I call Good tutorial video. So the buyer gets all the in and out of his new bow. Job well done. Another great video.

Agree with everything you did, I can’t stress enough how most shops get you 80% there. It’s what motivated me to have my own press and be able to do everything you just did. I had to get to that point to elevate my accuracy because local shops just didn’t get me there, well done sir!

Absolutely love this type of video, and learned a lot about it. got a lift 33 on order so I'll be going through this process soon and this is invaluable to me, so thank you!

Thought it was a very informative video. I try to watch all your videos they are always informative. Thank you!!

Congratulations Keith on your new Bow.

This is the exact setup I would run! Great to see the setup in detail.

I'm glad your dog came back out at the end.

Just shot the LIFT 33.. it's now on hold and coming home with me tomorrow when I bring in my Torrex for trade in.

Appreciate the video MFJJ. Camera quality was a little fuzzy but still appreciate the build.

Thanks MFJJ for explaining why soft knots for your d-loop is a great idea. I have been trying to do my own research trying to figure out why you would want to do soft knots. Now i know. I have always wanted to put them on my bow but wanted to understand why its a good idea beyond the single idea of trying to save your d-loop position when replacing a bad d-loop. Much appreciated. Unfortunately my local bow shop doesnt do this. And i shoot my bow a lot. Or atleast i think i do. And trying to get my strings to last as long as possible is a big deal to me. 👍

First 5 min.... I feel like Bob Ross is tying nocking points. Same calming voice, made me want to grab an easel and paint happy little trees. 😂😂

I'm your average bow hunter was looking to upgrade last year been shooting all the different new 2023 bows . Was down to bowtec mock1 and mathews Bowes phase 4 or geniuses .my old bow failed now I shot 2024 bows just in and had to pick mathews lift with all its tec. Excited to see how it can improve my shot with mathews new grip and cell apps

I have shot Hoyt for the past 10 years mainly because my personal preference in the draw cycle and I actually liked the spongy back wall that everyone hates them for, but I have to admit that I am very impressed and interested in getting to try out the lift and from what I've seen I think I may be switching to a mathews

Always toss out the Hamkea Rest cord football and install the EZ glide. Worth the 10$

I learned so much that I didn’t know from this video thank you

Can’t wait till my lyft comes in 🏹🎯🏆👍💨✅

awesome video, this is the bow I'm going to go with also so nice to see how others set their bow up prior.

Saw MMFJs 2yo video a few weeks on grip. I’m an idiot and was casting magic spells on a floppy wrist. Now I’ve pulled my hand back and I’m drilling nails. Dimes at 20, quarters at 30 and the dot on the dice at 40. I was doing pie plates at 40 a few weeks ago. THANK YOU!

Thanks for the awesome content and I would really like to hang out with mfjj an Dan !!!!!

Keep em coming.

Love these bow builds. Just wish I could see what’s going on a little better. I watch listen and have adopted Josh’s way of doing things. I believe he truly knows his stuff when it comes to bows. Please please please try tog at this stuff more close up so I can see it. I’m sure that’s a pain and I know you can’t please everyone. Just decided his way is the way I wanna do things. The videos out there are just slightly tough to see the fine details. Thanks

You Rock, way informative thanks

I was hoping this was the video where you get a bow ready to hunt in one day

Thanks

The bow wizard

It would be interesting to see the 33, though it's similar. Maybe more interesting would be the Hoyt since it's potentially more challenging to move the cams preciously

First off I love your videos. Just getting into bows. The frustrating part I have on your videos is that you review and score the bows but I'm not finding a spreadsheet or anything showing all the bows or 2024 bows or some sort of category for your scoring in one place that I can see side by side. I have to watch every video to see the scores. If you have that on your site or something will you please let me know? Great build video. Thank you.

Okay here is a real challenge. I would love to see a score difference between the flagship bow of the year against the budget bow of the year at 50 yards. If done honestly we could put a value on each point. It will make a lot of people mad but I would love to see it.

Mathews makes a adapter for quiver to set it out so rest works properly?

Video request! Do one with the 33” also why you chose which accessories and please do a video with a one piece vs two piece mathews quiver mounted differences

I'll be in Spokane this May and will find your archery shop. I plan to turkey hunt Washington again. Wondering if I'd be welcome to watch you or your staff set up a bow? Heck, I may buy one just to watch "you" tune a bow.

Just got the same paper tear through the same bow. Tried flipping the top hats on top cam and got the opposite tear. Did you use different top hats than what was from the factory or just had to switch them around? Many thanks if you get around to answering my question. Love your stuff and your new stabilizers are freaking awesome!

Easy breezy

Hey MFJJ, do you ever tie your Hamskea cable to the yoke? I have mine to the yoke on V3x33 and VXR31.5. Is there a reason not too?

MFJJ the way you do the cable for the rest. Can that be done on a phase 4 as well ?

Super vidéo, dommage qu’il n’y ai pas de zoom sur les montage ( D-Loop, noeud, repose flèche….). Par contre je n’ai pas compris pourquoi le bout de corde pour corriger le test papier !! Merci

Is that bcy24 for the Hamskea cord as well!?

Doesn't a d loop that short create torque on the string when it's at full draw using a handheld release that's twisting it 45 degrees? For an index it won't matter but for a handheld my thinking was it shouldn't pressure the string

When you get back to anchor, will twist of loop cause problems

When you line the square to the bolt hole, is it center to center?

very nice bow,, will you build me one?

I’m not sure I understand what the cord (with the extra for a spare loop) is for that goes from the lower limb to the rest.

Any chance you recorded playing with the tophats to get rid of the first tear?

You should do a Hoyt rx8 ultra

starts at 8am hmm

I mentioned this in the previous video...Keith your grip is too deep on the OnneX C, back off one set of knuckles so your hand is more flat. It gives you a more consistent anchor point and it moves the head of the release more in line with the string vs pulling the head away from your face.

Hey MFJJ how about selling the plans on how to build your draw board

Love your vids and that you are teaching the archery community but by god get a different camera man or teach him how to video these things!

What diameter serving are you using to tie in your peep?

I want to know how he has his release attached to the wrist sling. It sounds like. Innes clicker.

It looks like it’s hanging off the end of the release. Can you send me a picture I would like to do so. Lost a Stan heavy metal last year. It was an expensive oops

What length bar did he go with?

Unrelated to this video. Have you heard about the new Athens bows having a cam tuning system just like Bowtech? I know making cam tuning easier needs to be a goal for everyone. But this sure looks like a 1 to 1 rip off.

Can someone explain what MFJJ means by 13/16 off the riser? Is he talking about the distance from the side of the riser to the launcher arm?

How much are they going for? I'm gonna upgrade

So his top stop is hitting first and you choose to shorten the bottom cable? Lol my man what are you doing. The paper still looked like ass as well.

Trying to sell the bow

33 please sir

Great vlog Josh and your friend there did a really great job setting up his new bow. Congrats buddy!! Josh just one thing to point out and say is that I do not hate Mathews that I would not consider shooting them I just do not like that everyone thinks that they are the best bow out there and they sure do the most marketing out there than any other bow brand just to push their products and in my opinion there are just as good bows and maybe even better than Mathews out there. Each to their own. I shoot Hoyt and I love the product and people bitch and belly ack about how much they are and the tunning capability. At the end of the day is that sometimes you have to give up something to make the product better and that is what Hoyt has done. So then Josh what is your honest opinion on Hoyt bows because we all know that you just rave about Mathews like everyone else does. And also why do you guys in the USA get all offended when someone asks you how does a manufacturer pay you!!!

Keith has a personality of a Stone!😂 also Bows are like hoes Saying, Mathews makes the best bow this year is very objective! 😊

if his grip was better and more consistent it prolly wouldve been nails

👇 hattas gonna hate

dang the video is aweful is that cause its live?

Let’s do the 33!!!! Lol wishful thinking

Now that commenting is available, I will post here as well. Anyone that has actually been following these channels/ MFJJ, Tim Connor, and their podcast since they started them would know this and should actually care and call them out for the dishonesty. They were giving away 2023 flag ship bows from Matthew’s, Hoyt, bowtech, etc..(there were like 10 bows) and that was over 6 months ago. They said they were going to call people and had people fill out forms online with their personal information. MFJJ said he would be calling people and having them come in to make videos of the bow and him building them for people and it was contingent on people being able to drive or fly to him so he could make the videos and give them the bows. He also said they would be given away before hunting season so people could use them and here we are, hunting season is over and he never brings it up or talks about it again. Love the channels and love watching them but seems pretty scummy to not go through with something like that or even have a follow up video even though you took peoples information🤷‍♂️💀

Spend $5k to get a new bow set up these days. By next year its outdated already Absurd!!! These arent guns, computers, vehicles...

camera man sucks bro. I couldn't see anything being done.

Junk