This time without using my tilting router lift. woodgears.ca/bi...
Пікірлер: 160
@stephenhatalla51843 жыл бұрын
It’s encouraging to see that you can make quite sophisticated parts with even very basic tools. Thank you!
@elDoober3 жыл бұрын
everything started somewhere....
@hdwoodshop3 жыл бұрын
Good to see the old Mattias back. that’s what got me to subscribe years ago.
@TheMrWoodsman3 жыл бұрын
I have been watching your videos for over a Decade now and you are still teaching me new tricks! Thank you
@tabhorian3 жыл бұрын
I was just considering making plywood pulleys this morning for a fixed post telescope mirror grinding machine, and this video pops up in my subscription list. Perfect timing. :)
@sueastside3 жыл бұрын
"I can't tilt my router" Matthias:"just tilt the whole world around it"
@sdavidleigh664224 күн бұрын
Yep Hair Raising. My spouse would call it dangerous. A work room is just a bunch of fast moving knives. I will stick to basics but thank you once again - you are amazing.
@leesass36023 жыл бұрын
I frequently need to drill holes that are exactly perpendicular and have always struggled with doing so, What a simple and elegant solution. Thank you so much
@U_Ranasinghe3 жыл бұрын
I really like the way you avoided angle error in the drill press table. Thanks a lot for sharing the tip.
@angst_3 жыл бұрын
Screw two 3/8 thick plywood disks together, trim the edge using the table saw, but tip the blade at an angle. Flip, and trim the other side so you end up with a bevel on both sides. Then, unscrew and reverse the pieces so the taper is on the inside. The screws help align the pieces back together.
@matthiaswandel3 жыл бұрын
Or just cut on the inside in the first place (using the procedure I mentioned)
@angst_3 жыл бұрын
Of course. I was just proposing a alternative method that is prehaps less sketchy on the tablesaw.
@joserivero63763 жыл бұрын
Mathias, you are a true MacGyver at a higher level. Amazing how you come up with unique ways to solve issues and make them work. I enjoy watching your projects .
@matthiaswandel3 жыл бұрын
I'm not a MacGyver. Don't you know almost NONE of macGyver's tricks work in real life?
@decomputerleraarable3 жыл бұрын
YOUR INVENTION AND FLEXIBILITY ARE WONDERFUL! YOUR VIDEOS SHOULD BE MANDATORY SUBSTANCE FOR ALL BEGINNING WOODWORKERS. Rob
@MrPhoenix11383 жыл бұрын
I read that as making V-belts out of plywood and I was like “the madman he did it!!”
@raffly44493 жыл бұрын
Ripples in the space time continuum!! Love it !!
@MrStorbeck3 жыл бұрын
Did you turn the router off when you changed the bit?
@Scott-Ferguson3 жыл бұрын
He unplugged it. Don't you watch his videos? ;)
@JeffGeerling3 жыл бұрын
Asking the important questions.
@thedeloachsdoyoutube83773 жыл бұрын
Just wanna say how much I love your videos how encouraging they are and how you make everything seem obtainable. Thanks man peace and love from Tennessee Maker238
@raymitchell97363 жыл бұрын
Table saws only cause ripples in the space-time continuum, This Old Tony's Lathe does full-out time travel... something to consider when deciding if you want to go into woodworking or metal working. so... 😁 there is that...
@Curtis-Randall3 жыл бұрын
Awesome video!! We are truly fortunate to learn so much from you. Thank you for everything you have made and everything in the future. You have changed the way I approach thinking and problem solving on projects and I can’t thank you enough
@JeffGeerling3 жыл бұрын
03:01 are you sure it's not just the router bit getting stuck in the space-time continuum?
@darkmann123 жыл бұрын
Fairly certain RSJ is taking over.
@par5endos5623 жыл бұрын
I've been using my metal lathe as a time machine all this time and NOW you tell me all I had to do was use my tripod on the table saw?
@RowlandMax3 жыл бұрын
TOT!
@HouseGurke3 жыл бұрын
i just love the youtube engineering community
@aserta3 жыл бұрын
No, the tripod on tablesaw is for when you want to massage the time stream. It's mainly used to block any time travel from the metal community.
@Biokemist-o3k Жыл бұрын
New subscriber here my friend...OMG you made a wood shop from......Wood!!! that is so cool!!
@MarkWarbington3 жыл бұрын
Have you ever experimented with penetrating epoxy? It's a low viscosity mix designed to soak into wood and bind the wood fibers, primarily in boat restorations. I would consider using it to reinforce the thin edge of the V groove of the wooden pulley. I actually want to try penetrating epoxy on an MDF project where it will readily soak in and basically create a low-rent fiberglass.
@briannelson6053 жыл бұрын
Lol at the tripod causing disturbances to the space time continuum
@lwoodt13 жыл бұрын
It just goes to show how conditioned we are to use a tool only in the way it was intended. Many tools can be used in many different ways as Matthias just showed. We just have to think a little differently.
@BHARGAV_GAJJAR11 ай бұрын
Looks very cool maybe you should think of coating the pulleys with something in case of fibers or wood chips flying out
@KpxUrz57453 жыл бұрын
So nice to see real skills at work. Great original equipment.
@sephalon13 жыл бұрын
re: tablesaw to make the groove: If Matthias tells you something is too dangerous... it's too dangerous.
@CraigsWorkshop3 жыл бұрын
Challenge accepted! :-)
@patriotbear82672 жыл бұрын
I don't know why I've never run across You before but you definitely have my SUB! Going to check out some more of your videos now.
@simonkuebler85903 жыл бұрын
I've made a large (450mm) diameter pulley out of plywood on my band saw, which worked surprisingly well! I set the parallel fence to wall thickness and tilted the blade to get the 40 degree belt angle. you have to make through cuts at the beginning, otherwise the blade will jam due to the tilt and after making enough cuts, you dan turn it! Great solution withthe lathe too, though, my motor was too fast though, thats what the pulley was for :D
@dadygee3 жыл бұрын
Mathias: temporary cuts, pieces, clamps down, drills, screws are dead on and result is near perfect. Me: temp cut slants wronk (27-18 degrees in one end and 24-19 on the other side), clamp slide m´, drills too thin hole, screw shifts everythings 2 mill to f-all, screw snapps, mockup 10 times better than end result. Only thing i get right every time; 22mm holes for skateboard bearings.
@sergeysergeev7813 жыл бұрын
Крутой Матиас! Рукастый и с отличной головой! Респект!
@DanielConstantinoS3 жыл бұрын
3:31 I'd love to hear your explanation why we need this gap between the belt and the pulley. :3
@matthiaswandel3 жыл бұрын
so it wedges in on the sides.
@top1743 жыл бұрын
00:58 You are generating gravitational waves !
@gumbykevbo3 жыл бұрын
That large of a pulley will work fine with no groove at all, the groove in the small pulley will control the belt position. This makes it easier to move the belt if using cone pulleys for speed changes.
@doncripemc3certifiedsr.med3263 жыл бұрын
You appear to be a brilliant and creative soul....
@MrJlucRober3 жыл бұрын
When Matthias said "It's a little bit hair raising", you may understand "fly, you fools !" ;) Very useful video nevertheless
@mkegadgets43803 жыл бұрын
Another great video, thanks for taking the time to explain it in great detail. We appreciate it.
@MCsCreations3 жыл бұрын
Pretty interesting process, Matthias! Thanks a lot! 😃 Stay safe there with your family! 🖖😊
@PrinceAlhorian3 жыл бұрын
0:57 sawblade approaching 88 mph!!!
@sdspivey3 жыл бұрын
You already had the perfect additional ramp, the cutoff piece.
@cerega6663 жыл бұрын
Мужик! Ты крут!!!
@papap143 жыл бұрын
matthias please turn on the caption... I barely hard to catch up what you're saying since I'm not an english speaker... I am Indonesian by the way and I like your video pretty much 100%
@ricaroles3 жыл бұрын
Incredibly creative. I am from Indonesia
@tlange50913 жыл бұрын
I hope you mentioned the time space continuum after watching too much This old Tony, since he was discussed in the last live.
@robertbamford82663 жыл бұрын
Always more than one way! Thanks for the video.
@alecarpinteiro33473 жыл бұрын
Muito bom seus vídeos Mathias obrigado
@dmmflys3 жыл бұрын
Awesome ideas thx
@lbdeuce3 жыл бұрын
great video. thx
@CrimeVid3 жыл бұрын
I don’t have a router tilt, but I do have a lathe with a headstock that will turn 90° so I suppose I could make 6’ wheels if I wanted to !
@creepincat73993 жыл бұрын
Thank you. Excellent guide
@petercollin56703 жыл бұрын
I discovered how important it is to cut the grooves properly on my 20 inch bandsaw. Mine weren't deep enough, and the belt wants to slip when I am resawing lumber, no matter how tight I get the belt.
@chriswinter27252 жыл бұрын
Really great
@YooProjects3 жыл бұрын
Great project dear. I like your channel 🤩👍❤️
@vanshankguitars3 жыл бұрын
Very ingenious!
@innerechomusicltd6340 Жыл бұрын
Hi Matthias, always so helpful and relevant. Your accuracy and creativity is something to aspire to. May I ask and apology if it has been asked, what is the dimension of the pulley you create here, what ratio between the small pulley and the large pulley and what rpm did you achieve? I'm assuming this is to turn real heavy stuff, like a bowl at the first stage of turning. This would help me a lot with setting up my DIY lathe. Best wishes, Shlomi
@AllElectronicsGr3 жыл бұрын
Please make a wood cycloidal drive 😆
@theor.92193 жыл бұрын
Data analyst from the LIGO observation center here, thanks for the disclaimer Matthias, we'll strike that observation of as a false positive. Disclaimer: Not really a employee working at a LIGO observation center.
@randycosgrove36083 жыл бұрын
Just curious why you cut the initial circle on the tablesaw rather than with a circle cutting jig on one of your several bandsaws. Do you find a quality difference or is it just that that's the way you do that operation??
@matthiaswandel3 жыл бұрын
table saw is more accurate and more convenient for this.
@everettneil68603 жыл бұрын
V belts are measured by between the circumstance
@wolfman753 жыл бұрын
Very Nice!!! Thank You For The Info!!!!👍😎
@mevk13 жыл бұрын
Bigger would have been nice for even greater slower speeds but got the general idea -very nice! Also wondering what angle the belts are, maybe I have a router bit that angle? Never mind, previous post says 40 degrees. Dam sure I only have 45 degrees and that size does not friggen exist
@lands3r3 жыл бұрын
you could do this as wel at the table saw 3:17 just put it on 20 degree and rotate it upright against the fence edit: never mind 5:00 gives the answer
@jeffstanley45933 жыл бұрын
Always wondered what that sound was.
@bexpi71003 жыл бұрын
Man, I knew table saws are powerful machines, but I wasn't aware they were capable of warping the space time continuum.
@ddson3043 жыл бұрын
I saw the video well Thank you for good information
@thebatman9113 жыл бұрын
Awesome
@everettneil68603 жыл бұрын
V belts are to deep into your sheave or pully ,v belts are only to be halfway to three quarter into the groove, because the v belts have tensile strength only in the core for strength,and friction
@user-vs3eh7fi5g3 жыл бұрын
👍🌹🌼👍🌼🌹👍
@cgstadler3 жыл бұрын
Matthias- why is it desired for the belt to not ride in the bottom of the notch?
@matthiaswandel3 жыл бұрын
it needs to wedge in for traction
@MandoFettOG3 жыл бұрын
Why shouldn't the belt bottom out on the pulley? Wouldn't that be too little friction?
@matthiaswandel3 жыл бұрын
yes
@Immolate623 жыл бұрын
Pretty sure you turned the v-groove into your drive wheel on the 26", but I only know what you put in the video.
@matthiaswandel3 жыл бұрын
if you HAD watched the video were I made it, you would know that I used my tilting router lift.
@Immolate623 жыл бұрын
@@matthiaswandel Big bandsaw build 1: The wheels @8:18
@Immolate623 жыл бұрын
Sorry I was imprecise. I should have said, "Pretty sure you turned the v-groove into your drive wheel on the 20", which is the video I linked to.
@bmxscape3 жыл бұрын
@@Immolate62 imprecise is an understatement lol they are different bandsaws with different build plans...
@Immolate623 жыл бұрын
@@bmxscapeso my error was a meaningful event in your life? You're welcome. Have you built any bandsaws?
@EnUsUserScreenname3 жыл бұрын
Can you use the space-time ripples to make work go faster or away entirely?
@ddnaveh3 жыл бұрын
yep.. quit ur job
@PayneMaximus3 жыл бұрын
Matthias, are you considering updating your website to a more modern style? It would take a lot of work to migrate all the content, but it could be worth it.
@randycosgrove36083 жыл бұрын
Why? Newer isn't always better. In my experience it's frequently worse. I find his website just fine.
@matthiasburger23153 жыл бұрын
I like it as it is. Nice and tidy.
@Uristqwerty3 жыл бұрын
Current popular web aesthetics are driven by phones where it seems like you need a thumb-sized buttons and the classic "top-left lighting" effect slashes with the ability, or really inevitability, to see content at any rotation. Add to that an industry pushing "simplification" that doesn't want border lines or tinted panels to separate content, and instead settles for vast moats of whitespace. Then, younger developers copied what they grew up on, and then their work was in turn copied as well, each step moving farther and farther away from any sort of actual reasoning about why they're doing it that way. IMO the best visual design takes advantage of the way our brains have decades of experience using colour, lighting, borders, and shadows to separate complex scenes into discrete objects, allowing you to fit more information on-screen at once, and just about everything else these days is a fourth-generation cargo cult derived from what looked good on an executive's smartphone back in 2008.
@Captainwonderlad3 жыл бұрын
Apple Grinders, band name, called it!
@karolapolinsantillan38043 жыл бұрын
Exelente proyecto amigo quisiera comprar los planos pero si puede sacar en versión español le agradecería mucho gracias
@RobbieBeswick3 жыл бұрын
People with no tools: ‘I don’t have a router or table saw please could you show me how to make a pulley only using a screwdriver’
@davidpeterson51863 жыл бұрын
i really like the idea of the tilting router lift. Going to your website to check out the plans.
@zephal3 жыл бұрын
When are the plans for the 45" floor recessed band saw coming out?
@MuhammadDaudkhanTV1003 жыл бұрын
Great full ideas
@5in1killa3 жыл бұрын
You probably know already but the space time ripples are rolling shutter.
@SUROBLEDEKchannel3 жыл бұрын
V-Belt mantab👍👍
@timbricheno82942 жыл бұрын
Hi what kind of motor would you recommend to use as a pulley drive for multiple machines in a Toymakers environment?
@ajl94913 жыл бұрын
This video is Q approved!
@lanceeverett51083 жыл бұрын
Looking for advice and this channel is definitely the place for this question. I have a cheap jobsite table saw which has broken. The motor is not damaged. Do you think that motor would be acceptable for a homemade lathe? If not, what else would you repurpose it given that I am not an engineer and need it to be a somewhat simple build. (i.e. using it to make a home made table saw with lift and tilt is beyond my skills/tools) . Thank you to anyone who responds!
@matthiaswandel3 жыл бұрын
I suppose it would make a good boat anchor. Its a universal motor, I don't recommend using one of those for anything.
@lanceeverett51083 жыл бұрын
@@matthiaswandel thank you so much!
@johnrice67933 жыл бұрын
I’d give you a kerjillion dollars if you’d make a router table copy and send it to me. Not only that, you could tell me what the price would be (I’m short a few of the kerjillion.) You have some wonderful expertise. A remarkable mind.
@musthavechannel52623 жыл бұрын
If you do not have a tilting router, just tilt the router table keeping router still in space time
@ManuelBTC213 жыл бұрын
5:05 Time knows no mercy.
@hassanal-mosawi42353 жыл бұрын
Thanks for sharing those tips!
@pedroesp22013 жыл бұрын
👍👍
@kevinhoober18633 жыл бұрын
I love apple chips!
@Srinivas.kadhuru223 жыл бұрын
Sir my motor speed is 2880 rpm I have a two inch pulley on motor then what is required diameter of pulley and wheels to drive the saw for cutting of 4 inch wood (for BAND SAW)
@gregkrekelberg46323 жыл бұрын
Listening to that router, it seems a bit under powered. Is that an electrical issue?
@matthiaswandel3 жыл бұрын
poor speed regulation on that one
@proteo-x4u3 жыл бұрын
wonderfull !!!
@gregflowers65293 жыл бұрын
should the belt bottom out on the pully??
@matthiaswandel3 жыл бұрын
no
@Borgocity3 жыл бұрын
How do you calculate the pulley diameter ? Biggest pulley = less blade speed Small pulley = more blade speed
@benburoker51923 жыл бұрын
Should have just used the off-cut from the 20 degree 2x4 to support the wheel against the router... 😆
@drodver3 жыл бұрын
Video idea - apple grinder throwing chips everywhere
@paulsmyers2033 жыл бұрын
I found it interesting you don't put the pully onto an axel when running it on the router like you do on the table saw, and instead "freehand" it. Any particular reason?
@matthiaswandel3 жыл бұрын
That way I can actually approach the router bit and start the cut. I already made it perfectly round on the table saw.
@speedbump06193 жыл бұрын
I don't use v-belts much, but my initial concern is splitting the walls of the groove due to the wedge. Any concerns here or is the force low enough to be irrelevant?
@matthiaswandel3 жыл бұрын
fur such a large pulley, the force is quite distrubuted. I wouldn't use that cheap ply for a small pulley.
@KelikakuCoutin3 жыл бұрын
Thanks for the content. Keep up the good work. בס״ד
@user-el2fu3ee2g3 жыл бұрын
Hello. I am one of your followers. Can I know where to get the paper format to which you apply your ideas, such as the Bantu graphics