CS doors have been available in New Zealand for 20-30 years. They are a fantastic product and the market leader here. Their handles for pocket doors are equally as great, with really good templates to make for an easy install process.

This book is Awesome! I love the Lean-To-Shed the most (page 98). The plan kzfaq.infoUgkxe9yi0sulKgsp0VJJCIrLWWkvVqcU7LFR is to attach it to the back of my brick house. I also like how they walk you through the many different steps of construction, which is important for the less experienced like me.

You are absolutely correct, it’s all about the material first and then the installer. I installed a 28” pocket-door for the first time, about a month ago and already noticing some flaws. I wished I would have found your video first. Thanks for posting, your work and content is absolutely great .

I am building my own home and had 6 pocket doors spec'ed. Now I can't unsee this video. Guess I will be installing these because I am a quality hound.

I like to think these videos will help to make a better generation of builders. Kids who were interested in being a builder and learning the right way to do things.

What is important is Matt knows what a good job is. Many contractors just aren't this involved.

Awesome. Your videos are so helpful. We’re doing our first remodel starting this week and I’m learning about a ton of good products. I hate pocket doors but only know the cheaper ones from your video. I’m totally going to use this on our remodel!! Thank you!!

Man I love that soft open and close. Nothing beats a well installed pocket. My house was built in the early 70s with a well built pocket door that so far hasn’t needed any maintenance at least in the last 2 decades.

Thank you! Comparing products and talking long term maintenance issues is a HUGE help, especially for renovation newbies.

They just compared a product to something that 1/3 of the cost (LE Johnson 1500), not even close to an "apples-to-apples" comparison. Need to do better if you're going to present product comparisons with integrity. LE Johnson's HD200 and HD400 products all use ball bearing rollers and have tracks that better carry the weight of larger solid core interior doors for the custom homes I work with and they have the soft-close option as well. And they'll still be less than Cavity Sliders. I sell both Cavity Sliders and LE Johnson, and Cavity Slider is only really needed when we get into moving 9' wide by 7' tall pocket doors (moving small walls). Cavity Sliders has a great product, strong and durable, but not needed for standard operations of a bathroom door. If you want to pay that much extra so that you can remove a pocket door without a wrench, go for it! I love Cavity Sliders, but most people don't need to pay that much extra when there's a great middle ground. I'm not an LE Johnson rep, I work at a custom home dealer supply. I just didn't like the comparison here of a really high end product to the lowest end product when there's a great middle ground.

YES!!! Perfect timing sir, just started a bathroom remodel and yesterday when I was working I wondered if you had a pocket door video.

Homeowner: I also specified and purchased the pull handle inserted in to the door. At the very beginning of this video is the hardware style. A push button to pop the handle out.. Two or three fingers can grasp the handle to pull the door open. My wife had arthritis. The most prevalent big-box style is a thin brass hook which hurts fingers. I intentionally paid big bucks. It is worth it.

You have just installed the best off the shelf pocket door hardware the world. This in not only a quality product but it's idiot proof to assemble and install. 20 minutes is typically what it takes to assemble the frame and hang it it the opening and another 15 to hang the door and adjust the soft close mechanism. Great company, great people.

My dad and I just built the frame for a 24 in. pocket door we're putting in an RV we're building. Even though we're not using a fancy aluminum frame like this - i love the idea of the foam at the back of the unit to soften the blow of the door as it goes back in. I'm definitely going to incorporate that idea into the door as we're still in the open frame portion of the build!

This is absolutely!!!!!!! Amazing I love the fact that you Pay attention to detail and the fact is that you love doing things the right way the first time and no cutting corners! You don’t turn a square into a circle.

Nice! Never heard of these in over 40 years in the biz. May need to spec. these on my next project.

This setup would make me reconsider pocket doors.

So glad you did this vid now. I will be installing pocket doors in a couple months. Finding good hardware can be difficult - you saved me the trouble 👍

It is refreshing to see a quality item such as the Cavity Slider door reviewed and more importantly, the reasons for using/installing a good product ONCE rather that a poor cheap product REPEATEDLY. Unfortunately homeowners often say "we saved a fortune by getting low cost pocket doors" in the early years, but soon complain about the cost of repair or replacement of the poor quality low cost pocket doors a few years later. The cheap product replacement labor costs alone far exceed the "cost savings" in the beginning. It is sad that for most people, a "DEAL" out weighs Quality in almost everything. Thank you for posting. My work as a renovator is almost 100% repairing or replacing failed low quality products and dealing with poor installation. Take care!

Was thinking of installing a pocket door in my remodel. Thanks to this video i now realize that i should avoid overly mechanized systems due to cost and longevity. Nothing beats a door and hinge !

Excellent video! My girlfriend works for one of the nation’s largest builders, and it just upsets me when that they don’t even use pocket doors....let alone quality hardware like this. I think most people would be willing to pay more if they understood what they are getting for their money. Thanks Matt!

I bought a house 2.5 years ago, first house, in CA @ 29 years old. I have a pocket door for the master bathroom that rubs in the middle a bit. Thanks for this video and all the education you provide.

Y'all need to add this to the Real Rebuild playlist! I was going through that whole 57 video list trying to find this as I am getting pocket doors in a remodel soon.

I don't think the million cycle testing is excessive, I've told my kids a million times to CLOSE the DOOR!

The pocket looks super reliable. I’ve worked on a lot of 1950-1960s homes that had so many issues with these doors. Nice product

I love your commitment to quality! Need more builders like you in this country!

3:25 You misread the script: it was "if something fails on this 20 or 30 years down the road, you will still be able to buy and cheaply/easily replace this hardware"

Fantastic video as usual. Very detailed, clear and the value explained. Well done and thank you.

Very nice product. Building a house now and went to the website to spec out my needs. Price for a standard 3'0" 6'8" came out to $1,100. I"m afraid that's outside the budget! Wow... Wish I could justify the expense.

Thanks for the great video. I am in the process of installing a pocket door to my son's house and now I know exactly what to get. I'll be purchasing a Cavity Sliders door! Great hardware.

Thank you so much for this deep dive. I liked your older video but I knew there would be newer products out there! Thanks again!

perfect timing! going to install a pocket door in a hall doorway to a bathroom and bedroom that I rent out. this system will be perfect knowing it will withstand the renters.

Very interesting I always hated pocket doors due to the noise and wiggle etc. This looks like a good option.

If I only have the budget for the Johnson pocket door hardware, I require my clients to get the soft-close add-on. The carriages that come with the soft close system have ball bearings

Great video. I always appreciate what you do. It's the old "Cry Once" cliche' when it comes to doing things right. Thanks again.

- EXCELLENT info ! ! ! Thanx for sharing. Nothing better than putting quality products in one's home.

Thank you for doing the research and all the hard to showcase these products to. By doing so, we are able to make an informed decision on what and how to build. God bless.

Those are beautiful! If you want to come to West Texas and retro fit a couple of these into a 60s house, you’re more than welcome to! 😁

Will be hitting up BMC for these on our new build in Dallas - been worried about the pocket doors on the plans already - and now I'm actually excited instead!! Thanks for the video Matt!

the good thing to see this clip is learning something but the CS pocket door cost raised after this show clip

Brilliant how the trim pops off like that! I really wish my Hafele hardware had that.

Have installed too many of those cheap ones...never have been satisfied with the finish product. These look great!

These are nice pocket door frames and appreciate your channel. I looked at them before my purchase and decided to get something less expensive but still USA made and good quality. In a remodel, I'm using a 2x6 interior wall between MB and master bathroom 36"x80" door and decided with a pocket door to minimize a swing door being in the way of accessing either rooms. The final decision was with Johnson 2x6 Wall Framing 1560SC Series Soft-Close Pocket Door Frame, ball bearing rollers and metal frame.

Wow! I never knew they made a high quality pocket door! Very nice option. Thanks for sharing this!

A earth magnet to catch the door open. I like to set the door glide back 1/2 and not expose the notch in the bottom of the door. Good product, I am familiar with Hafele. Thank you sir.

Used Sliding glass patio doors can be turned into awesome pocket doors. You put mirror tint on one side and wallpaper on the other.

I have 4 original pocket doors in my house that was built in 1905. Attaching a piece of weather stripping to the back edge of the door works very well. I replaced the rollers in 1979 when I bought the house, and again in 2016 when I reconditioned the interior of the home. The most important parts of any installation : Who is doing it is #1, and the quality of materials being used is #2. The CS frame is awesome, but so is top choice select lumber. Also, if your going to use aluminum, why not spot weld instead of screw the parts in place.

Thank you Matt this is really good to know and we can show it to customers so they understand why to pay extra and what the difference really is. Great job. Yes we are subscribed and also like this video. Painters will also love it because they can remove the door and spay it in the garage instead to do it onsite. Could you look for a good quality extension level. We still be looking around for one which fit the budget but also is high quality. We found Stabila but cost like $300 and we found Empire for about $100 and a interesting fordable from Bosh for $150... Extruded aluminum is always very good to be used. Especially for Saw's as guides and stands but now as a Pocket good is really a nice strong feature. Especially in wet areas I think the aluminum will shine even more.

Great video Matt I've been building for several years and have about seen it all, love your videos keep it up

AWESOME! Going to put these in my basement. Expensive, but SO worth it.

Nice product, nice sales job. Will definitely be looking to use at the next opportunity.

i'm sold. definitely seems like a better, lasting solution for pocket doors

I've been thinking about doing 4 retrofit cavity sliders. What a nightmare! Finding a builder to do this where I live during Covid. I really like the soft open/close idea.

You're basically in the advertising business. I use heavy duty track and rollers and make the 1 3/4" doors run in a 2 x 6 wall with two by lumber on the flat each side. Very substantial.

These internal cavity sliders, leak air like crazy down here in OZ, Matty. None of the houses down here have warm attic spaces. Some of them, when you blower door test @ 50Pa, they automatically close. Pretty neat home feature.

It's nice to read the comments and see all the builders who actually give a damn talking about showing this kind of stuff to customers and seeing if they are willing to pay for the quality. As much money as I spent with things I upgraded during my build (all on my own research, my builder never offered any sort of 'quality' advice, I now know he just doesn't care), I sure wish I had known about the pocket door hardware importance as I have 11 pockets doors with the basic crap frames. The doors themselves are nice and I picked really nice lock/pull hardware, but unfortunately 2 of the 11 have scraping issues.

I bought three of these after watching this video. Really happy I did,

Great video. I bid on a job last week. While not a pocket door job, my work compared to others is like comparing CavitySlider to standard pocket door hardware. I was a couple of hundred more. I didn't get the gig. People don't care. They'd rather cheap out and complain later when having to repair it.

My "en suite" is 48x54 not counting the 30x30 shower bumpout. Perfect candidate for a pocket door. Even though I'd have to tear out the wall this looks like it would be worth every agonizing minute of the process.

Excellent presentation brother.

You said "heith" @1:20 lol. I've only noticed this phenomenon with only a few people in my life but it gets me every time! Awesome video, sir :)

In the 1960s into the '90s there was a very good pocket door frame with heavy duty hardware including the hanger rolled system available to lumber and millwork dealers. My company sold well over 200 of them without a complaint. One of the things we recommended to our builder and architects was to use a 2 x 6 wall to install pocket door frames that way we didn't have worry about the drywallers missing the frame and having a drywall screw hit the opening for the door. On this system, I really like the heavy duty rollers and the guide at the bottom. I can see why this frame costs 3 times more. The soft close system looks great.

"Cavity Sliders" sounds like a nightmare dental product.

I truly love your attention to details and how you explain things, you are just like Enez Yilmazire and am forever Grateful subscribing to your channel and his channel too. You guys are the best and shout out to Chikis Krulsawat and Danny Lush and Darren. Darren u are keeping it real. Shout out to Mattbangwood

Yes, I agree, spending more money to buy better quality material or products make the difference in time.

oh god, so deep in details which I'm looking for long...thx

Wow, thanks for showing this...As a remodeling contractor, for even longer than you, :)...I've always HATED pocket doors...I try to avoid them at all cost, but; I like that cavity assembly...State of the art hardware...I found a place near me that carries them..

I love pocket doors. I can see the difference thank for that video

Sweet...now I love pocket doors again!

Wow timely video! I will be ordering a pocket door system this week, install in 3 weeks, definitely giving them a strong consideration, after all its my own house

Nice door, when we remodeled our old house in CA Pocket doors were not allowed for bedrooms or bathrooms. I believe the reason was if the fire got into the wall cavity it could disrupt the ability for the door to open properly. Paul

Amazing. Here! Take my money!

Awesome work! The difference is staggering !

First you have to train framers to use levels and a tape measure

Really like the comparison of these doors! Not sure how I feel about the skinny jeans though.

As a now retired builder I always changed the wheels and track for a heavy duty high end replacement not the manufacturers version of heavy duty adds about ($100 aussie ) and less than five minutes in labour cost but worth every penny spent they glide redicoulsly smooth and will be trouble free

Give Gilbert an extra beer for his efforts, he rocks!

I build the pocket walls with 2x lumber turned sideways when possible. It only adds 1" and eliminates the wall shake when using the kits (also allows 2" nails and 1 1/4" screws). Angle braces (top & bottom) and pocket screws on the mid-wall bracing and you'll have a pretty strong wall. A kerfed board for a bottom track with a matching pin in the door bottom also helps the keep the door from scraping the walls and eliminates the exposed slot on the door slab. The heavy duty hardware is a must along with a soft close and a soft stop bumper. That system is pretty nice, but probably a bit more than most customers would agree to. Thanks for sharing.

Great video, so much detail.

I’d love to see a video of how your guys did the dry wall and trim out for this pocket door…

This looks amazing! But what happens when that foam decides to crumble 😉

I loooove pocket doors! i have them in both my home.

The most important thing he said was that the person doing the final door install was the same person who installed the track system.

A couple of upgrades to the standard door like a padding in back and groove in the bottom would be fairly easy.

Love the content! Very helpful.

This is a very good episode. We are bout to do a pocket door in the house.

I want pocket doors like on Star Trek. Especially with the swishing noise. :)

Excellent video. The cavity slider seems the way to go.

You should make a documentary on the Dutch pocket doors I install daily. One man installs 8 to 16 pocket door frames in a day, depending on the walls it’s gonna be installed in. Push2Go, Softclose/Soft opening systems, have a Ceiling hoist rail go through them. No bottom track needed, so it the door can be laminated on the bottom too.

Quality in! Quality out!

Great installation. I would look into isolating the door to attenuate vibration that may get transmitted into the door. Vent fans, stereos, appliances, people walking, etc. can cause things to buzz annoyingly. I’d be interested in a solid or foam filled door, too.

me coming here to find a cheap way to install a pocket door: welp, I guess I'll just show myself out my non-pocket door

After watching this video, I REALLY wanted this in my new house. $3200 for the frames for 4 doors was just a it too steep. I went for Johnson Hardware instead.

Getting ready to install one, thanks for making such an in depth video on this! I despise cheap hardware! If I'm just a homeowner building on my own, can I still buy one?

Good video enjoy the details

Terrific! I'm sold.. now to go see if i can even get them.in Tucson...lol

Whoa, those pocket doors are smooth! They're so quiet. Can you make any videos on window and window insert installation?

Good , informative video 👍👍

Definetly buying this thanks!

Thank you for sharing this.