Yanmar Diesel Engine Cylinder Head Rebuild

Рет қаралды 6,455

Күн бұрын

This Yanmar diesel tractor engine cylinder head needs rebuilding. We'll replace the cylinder head valves, valve seats, valve seals, valve springs, and valve guides. We need to resurface the head so the Yanmar head gasket will seal. The diesel engine will have good compression. TOOLS ↓↓↓↓
➤ FULL VIDEO: • Abandoned Yanmar Tract...
➤ Service Manual (Yanmar Engines): bit.ly/3Lk7gVP
➤ ALL Yanmar Manuals!!!: bit.ly/3TexzyH
Timestamps
0:00 Intro
0:15 Valve Inspection
1:10 Cylinder Head Resurface
2:25 Machine Shop Needed
3:14 Cylinder Head Rebuilt
4:05 Cylinder Head Installation
5:32 Outro
Supplies:
● 80 Grit Sand Paper: amzn.to/3MG23oD
● 150 Grit Sand Paper: amzn.to/3Lzc7je
● 220 Grit Sand Paper: amzn.to/3LAn3Np
● Valve Grinding Compound: amzn.to/3LBSRkY
Tools:
● Valve Spring Compressor Tool: amzn.to/37RkmIW
● Valve Lapping Tool: amzn.to/3KymLVS
● Feeler Gauges: amzn.to/3Lwks7h
This will help you replace a Yanmar head gasket.
This is a Yanmar YM2000B Diesel tractor engine.
As an Amazon Associate I earn from qualifying purchases.
#enginerebuild #diesel #machineshop #dieselengine #automotive #mechanic #willitstart #restoration #tractor #tractors #farm #farming #yanmar

Пікірлер: 16

@MattsShop 2 жыл бұрын

Hey Yall! ➤ FULL VIDEO: kzfaq.info/get/bejne/h6uig6h3tb2olWw.html Timestamps 0:00 Intro 0:15 Valve Inspection 1:10 Cylinder Head Resurface 2:25 Machine Shop Needed 3:14 Cylinder Head Rebuilt 4:05 Cylinder Head Installation 5:32 Outro

@shark70007000 2 жыл бұрын

I know someone that had an old Yanmar Diesel engine, on a tractor. It was still running good. 👍

@myslash09 Жыл бұрын

Nice job im picking up a nice 80s yanmar 1720d so your video was very informational. Im a new subscriber and I think I’m going to like all your videos. Thanks bro

@MattsShop Жыл бұрын

Thanks! These Yanmars are great tractors. The best of their vintage.

@dimka656 Жыл бұрын

Hey Matt what kind of manual book you using to get all the torque specs and how to rebuilt?

@MattsShop Жыл бұрын

I have service manuals for a YM240 I bought off eBay.

@yosoydpfknr2855 Жыл бұрын

@@MattsShop where can we chat ? Am about to rebuild a ym1700 and is the same engine with minor difference but your manual it's just what I need can you share it please

@MattsShop Жыл бұрын

@@yosoydpfknr2855 mattsshopofficial@gmail.com

@yosoydpfknr2855 Жыл бұрын

@@MattsShop just sent you an email thanks matt

@shawnburhus6188 2 жыл бұрын

Not sure why my comments disappear but need info on a 2 cyl yanmar tractor. Fuel injector pump. Have one,? Any leads on one or rebuild kit? Any instructions on removal, installation? Thank you.

@MattsShop 2 жыл бұрын

Hope tractor parts has new fuel injection pumps. They are a PAIN to install and expensive. They have to be shimmed right with a thin copper gasket behind them to time them correctly and the governor linkage has to be reset (I have a video on that). Are you sure that's your problem? You have to follow the procedures in the manual.

@shawnburhus6188 2 жыл бұрын

Thank you Matt! I get very little pressure at the fuel injectors. I tried at the pump and left side barely spits out any fuel. So I assume it's the injector pump. I can get it started but takes hwat in intake and smokes like crazy. I'll welcome any advice. Thank you.

@MattsShop 2 жыл бұрын

@@shawnburhus6188 Are you getting good spray out of the injectors? The actual part that sprays in the engine? The fuel will barely squirt out the injection pump that's normal. When it's compressed it's 2275 PSI. PLEASE BE CAREFUL. High pressure diesel is dangerous.

@shawnburhus6188 2 жыл бұрын

Yes, I did the cardboard truck as you showed, but on injector barley swuirts. So I went back to pump and very little pressure out of pump on the same line going to injector. So, I assume it's injector. You do awesome work. I'll pay you and your wife/gf/signing other to come here and check it out. Free trip to Reno...

@Audittchick Жыл бұрын

@@shawnburhus6188 I would buy a single new injector and test with it before buying the pump. Mine had bad injectors that were doing what you are saying.