How to treat air moisture from the compressor - Tips and Tricks with Jim Colt
Рет қаралды 9,616
2 жыл бұрынIn this episode, Jim Colt, an industry veteran from Hypertherm, talks about how to treat air moisture from the compressor so it doesn't affects cut quality. Visit www.maverickcnc.com/ for more information on all of our plasma cutting tables.
Be sure to subscribe to our channel and click the bell icon to get notified when new “Tips and Tricks from Jim Colt” videos are released.
For more information on all of our plasma cutting tables visit our website or social channels
maverickcnc.com
MaverickCNC/
MaverickCNC
maverickcncplasma
@McMikeful 12 күн бұрын
Hey I am just looking for solutions as most of us here. Thanks for your video. My question now is would it be cheaper to get oxigen bottles from my gas shop and not go through with buying these air dryers water separaters. Living in Japan 82% humidity and I am just having gallons of water in my tank. What makes it impossible to cut.
@91rss 8 күн бұрын
an aftercooler from the compressor head before it hits the tank take 90% or more water out,
@lenness6689 Жыл бұрын
I hard piped mine to the table and have a 4" gauge at the machine I can see from most of the shop. Having that gauge has saved me from having the machine stop cutting in the middle of a job. But now with 2 upright 175psi compressors had no close calls
@lloydscharf6897 8 ай бұрын
Would using a second or even a third storage tank in series dry any air if it let the air cool before going on to the next tank?
@streetlegalsprintcar Жыл бұрын
Rusty water is common for my tank, even though it's still new.
@lyndonmansell351 Жыл бұрын
Wouldn't an intercooler be efficient and less trouble than these spin down filters. Any pressure loss would still be ahead of the pressure switch.
@tigwelding123 Жыл бұрын
💪👍💯
MaverickCNC Plasma Tables
Рет қаралды 2,6 М.
MaverickCNC Plasma Tables
Рет қаралды 12 М.
Rich Phipps Garage
Рет қаралды 20 М.
Beck's Armory LLC
Рет қаралды 241 М.
Three Sons Restorations
Рет қаралды 80 М.
Kevin Caron, Artist
Рет қаралды 169 М.