that “turn it off” was so aggressive i locked my phone
@pappieee94097 ай бұрын
Sir I need a new alignment now 😩😂
@billbob95708 ай бұрын
TURN IT OFF
@spiderman-vd7kq7 ай бұрын
lol 😂
@iqxfl12735 ай бұрын
😭😭😭
@H1GHD3FF27 күн бұрын
Helpful tip: if takes a lot of effort turning the collar, you have much preload
@arcanevoid91996 күн бұрын
you shouldnt be using the lower collar to adjust ride height in the first place
@H1GHD3FF6 күн бұрын
@arcanevoid9199 statement is reference to preload
@subzeroninja70173 ай бұрын
After I made this change the tires are spinning on the shock absorber 😮💨
@sschu22237 ай бұрын
Loosen the hub bolts you didnt use the spacers and you bent the hub flanges that might not have been square in the jig when they welded the flange on .
@kioop25945 ай бұрын
Can we see the rear springs?
@bodeine4546 ай бұрын
How do these ride if the car is lowered say an inch up front and maybe 2 in the rear?
@JoshVacher5 ай бұрын
more stiff yhan stock obv but suprisingly nice for cheap ish ones
@Smokey.075 ай бұрын
Steering and control is night and day better. Ride qaulity depends on how you adjust them and how cheap you go with them
@thomasbates1779Ай бұрын
What's the limits on overlapping threads when going up.
@subzeroninja70173 ай бұрын
Después qué hice este cambio las llantas rosan en el n amortiguador😮💨
@zanemarciniak77896 ай бұрын
Does this hurt the car😢
@nickp11214 ай бұрын
Turn it off
@HD-xr8xz8 ай бұрын
What happens if you can’t move it by hand. I think mine are seized I can’t adjust it by hand like that on the ride height of the front left. The right side I am able to. Any tips for that?
@ShotBySpray8 ай бұрын
Take them out and dip it vinegar overnight
@jikwag34158 ай бұрын
Turn the top nut and it'll do the same thing. Just probably takes a bit longer
@wahc49968 ай бұрын
don’t do that bruh you’re gonna fuck up yorke coils if they aren’t these exact coils yours aren’t able to move by hand and you’re going to fuck with the preload so just use the wrench
@victorflores80336 ай бұрын
Use spanner wrenches that come with the coils that’s what they’re made for
@daviesjordan40066 ай бұрын
@@victorflores8033he’s talking about spinning the entire coil you donut. yes you use the wrenches for the collars and then to spin, it you have to use your hands. like he literally did in the video…..
@sunoclockoneday257618 күн бұрын
Is this Max pee dingrods coilovers?
@brendam455 Жыл бұрын
Going up is to the right and going down is left is that correct?
@connorslothyhugs92911 ай бұрын
Lefty loosey righty tighty
@jikwag34158 ай бұрын
Lefties loosie raises it up
@tysoncamaro94082 ай бұрын
Preload plz
@jvazquez71602 ай бұрын
Not once it gets rusty
@johntucell4 ай бұрын
Worts suspension brand
@rodnietorres308210 ай бұрын
Does this affect the preload on the top?
@EliVloggss10 ай бұрын
i got these exact coilovers when i was lowing mines it wasn’t
@slimtooslime9 ай бұрын
if the locknut wouldnt move it would affect the preload, but here you can see it turn with the shock
@danikkasleep869 ай бұрын
Is it faulty?
@slimtooslime9 ай бұрын
@@danikkasleep86 no, usually you wouldnt want to change the preload while adjusting height, if you wante to change the preload you would turn the upper lock nuts instead
@TheNitroPsycho11 ай бұрын
Thats the front.
@zanemarciniak77896 ай бұрын
Those are lateral links in the background off to the right
@notcooken583011 ай бұрын
is the spanner wrench even necessary at this point if you can just spin it without it?
@Tylermattrazzo10 ай бұрын
When you use them for a bit they get stuck
@tylerb30238 ай бұрын
Wont hurt to have it or a flathead screwdriver and hammer
@iclassicify31264 ай бұрын
You’re not supposed to spin without it
@Cobsspeedshop9 ай бұрын
Thats the front
@IdealLS7 ай бұрын
How can you tell??
@Smokey.075 ай бұрын
Thats the rear. Front would have a sway bar end link connected to the strut. This is a coupled rear strut. They also make divorced rear struts where the spring is separate from the strut.