MAZDA CX-7 FRONT BRAKE PADS AND DISC ROTOR REPLACEMENT REMOVAL CX7

No video

MAZDA CX-7 FRONT BRAKE PADS AND DISC ROTOR REPLACEMENT REMOVAL CX7

Рет қаралды 50,646

Күн бұрын

MAZDA CX-7 FRONT BRAKE PADS AND DISC ROTOR REPLACEMENT REMOVAL CX7
►Check Out Our Website: mechaniclifesty...
Hey guys, in this video we show you how to remove and replace front brake pads and rotors on Mazda CX-7. This is a demonstration video how we took the front brake pads off and the rotor off to inspect them because we purchased the car at an auction and we do not know anything about it. It is not very complicated procedure to replace the brake pads. Always install new pads, new rotors( or have the old brake rotors turned at a shop). We would recommend to use a special tool to compress the caliper.
This might be helpful on:
2007 Mazda CX-7 Front Brake Pads and Rotors replacement removal CX7
2008 Mazda CX-7 Front Brake Pads and Rotors replacement removal CX7
2009 Mazda CX-7 Front Brake Pads and Rotors replacement removal CX7
2010 Mazda CX-7 Front Brake Pads and Rotors replacement removal CX7
2011 Mazda CX-7 Front Brake Pads and Rotors replacement removal CX7
2012 Mazda CX-7 Front Brake Pads and Rotors replacement removal CX7
► OUR MAIN CHANNEL: bit.ly/2ad33QG
► 2013 GT86 Project Playlist: bit.ly/2dz4xY1
► 2015 Ford Fiesta ST BUILD Playlist: bit.ly/2a59UKp
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Camera
Panasonic Lumix FZ300 amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable amzn.to/2jjg9Bd
•Computer for editing
Lenovo ideapad 310 amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Second Camera
Sony HD Video Recording HDRCX405 amzn.to/2jk8nqB
•GoPro HERO5 Black amzn.to/2ktNKfj
•Extra Computer For Editing
Lenovo Ideapad 510 amzn.to/2ktOuB7
This is NOT a sponsored video. Everything is purchased by us!
► Instagram: / worldmechanics
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

Пікірлер: 24

@AutoRepairGuys 6 жыл бұрын

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzfaq.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@kites0852 5 жыл бұрын

The two small screws in the rotor are NOT NEEDED. They are there to hold the rotor on during the vehicle’s moving down the assembly line. That is all they are for. If you screw them up taking them out, throw them away. The tire/rim will hold the rotors on thereafter. New rotors may not have the holes for those screws, no problem.

@diegosanchez1080 7 жыл бұрын

Your video was really helpful. I'm changing my father's brake pads this weekend with this video. Thanks!!

@pinetree4600 5 жыл бұрын

Good video. Thanks! Great idea about the zip tie.

@chrisdelgado3530 6 жыл бұрын

These dude are great. Thank you for your video.

@danal2960 6 жыл бұрын

Great video on the breaks pads I had a question is it the same process to the rear break pads??? Thanks for sharing your knowledge !!👍🏽👍🏽

@danthemanoftheland Жыл бұрын

Thanks!

@darcylegal3930 4 жыл бұрын

MrM6d Those 2 little clips are “squealers” that are supposed to let you know when the pads need to be replaced. As the pad wears downs they will eventually make contact on the rotor and rub on the rotor producing the squealing sound.

@chrisdelgado3530 5 жыл бұрын

Again many thanks for your video excellent.

@adnanselimovic5567 2 жыл бұрын

Great video, Thank you guys.

@chrisdelgado3530 6 жыл бұрын

Thank you. Great video!!!!!!

@maxnepomuceno7085 7 жыл бұрын

Thank you!

@tracecowart 4 жыл бұрын

Thanks guys!!

@boogeeks4217 4 жыл бұрын

Do you have to put the shiny back plate back even though the new brake pads have back plate already? I thought I read it somewhere not to reuse them

@Brooklynraised68 7 жыл бұрын

awesome thank you

@71iron13 6 жыл бұрын

very helpful thanks! DIY4LYFE

@hornet224 3 жыл бұрын

BORAT making youtube DIYs. Great work. BTW, where does the jack positioned? There are not any hard points that I can see. You have a block of wood spanning something.

@nicolettehopkins9012 Жыл бұрын

How many calipers does a Mazda CX-7 have?

@kalinradoulov3760 4 жыл бұрын

All good stuff ,need garage heater

@Byrd393 4 жыл бұрын

Could anyone explain how to remove the center console on my 2008 Mazda CX-7? My shifter is stuck in park and I don’t know what to do.

@MrM6d 5 жыл бұрын

With the brakes comes the 8 shims and 2 clips. BUT NOWHERE DOES THE INSTRUCTIONS SAY WHERE THE CLIPS GO! The shims are rather obvious. At 10:36 on the top right side you can see the clip on the trailing edge of the inside shoe. Mystery solved! But what does it do?

@kristaeveland9752 Жыл бұрын

Um sir you are supposed to change rotors too

@annrichardson8213 Жыл бұрын

I need to replace my sunroof deflector on my 2007 Mazda CX 7 Grand Touring should I order from Mazda?

@Sazonman 6 жыл бұрын

Basically this fucking idiot is placing ever exact break part he took off instead actually replacing them...next idiot with a fucked up non speaking proper English in line....move it along idiots we don't have all day for your dumbasses.