Mazda MX5 dash cam and Brodit mobile mount fitting

Рет қаралды 4,681

2 жыл бұрын

Fitting a Garmin dash camera and a Brodit mobile car mount to the MX5 and hiding the cables.
The Brodit mount can be found here www.brodit.co.uk/live/product...
The universal mobile holder can be found here www.drivesafeandlegal.co.uk/p...

Пікірлер: 9

@krzysztofstepien5728 Жыл бұрын

Thanks for excellent explanation 👍 👍👍 I have done mine dash cam in 20 min. Thank you.

@Andrew83S Жыл бұрын

Excellent guide - thank you

@pauloneill8912 2 жыл бұрын

nice work Nigel

@frednetherlands887 2 жыл бұрын

Thank you.

@TheKsharm Жыл бұрын

Nicely done. I'm sure there are lots that allow you to use that kind of fuse jumper cable direct to usb rather than having an additional 12 volt cigarette lighter type affair. Is there a reason you did not do that?

@NigelEaland Жыл бұрын

Firstly thanks for watching and the comment. The camera requires USB with a 5v voltage supply. You need to use a regulated supply to drop from 12v to 5v onto a usb connector. The first time I installed a camera was on the Mk4 Mondeo (see video) and I used a USB power unit to do the job. This I felt was a waste of money as the camera comes with a cigarette lighter plug to usb. It’s cheaper to just buy a cigarette lighter socket and use the cable with the camera.

@TheKsharm Жыл бұрын

@@NigelEaland ah I see. I will watch that then. I only watched the mx5 video! Makes sense though. Thanks