Matt, Thanks for the support. Super glad you are enjoying the chassis and beadlock rings. Super well put together video and digging that new course a lot. Cant wait to see it finished. I really appreciate the kind word. Means the world to me. Thanks once again for trusting and featuring my products. Joey Mazz
@2fmrc2 жыл бұрын
Absolutely man! Well deserved. Thanks for all you’re doing for the scx24!
@mazzdesigns69292 жыл бұрын
@@2fmrc 🙏
@therealteja2 жыл бұрын
Would i be able to run a c10 body on this
@2fmrc2 жыл бұрын
@@therealteja yeah. Should work just fine with a little work. I’ve seen pretty much every body mounted up to them.
@romystoys19 күн бұрын
@@2fmrcHey Brother Where can I get a Body like this one? The dark grey one on the Mazz Design Chassis
@hellofromsoutheastalaskarc75172 жыл бұрын
Hello from southeast alaska I'm putting together a scx24 aluminum chassis tonight.i got Emax servo and aluminum mount. Next doing 66t motor into the trans.
@texomarc2 жыл бұрын
I freaking love my Cheat Code! Bella Bronco is amazing!!! I do love the cliffhanger! Great job on the paint. Hope to be shooting a video comparing mine with my buddy’s cliffhanger Cheat Code on portals later today. Great video, Matt!
@2fmrc2 жыл бұрын
Heck yeah man! I may do a vid on this one Vs my Killr chassis with portals. See how it goes lol
@loctran2011 Жыл бұрын
@@2fmrc you still should do this video
@bouncenerd2 жыл бұрын
Can’t wait to see the finished course!
@4sixrc1432 жыл бұрын
Man that’s a sweet truck. Nice build Matt!
@BullgearRCvideos2 жыл бұрын
Cheat code is really sweet.
@mazzdesigns69292 жыл бұрын
Thanks uncle lee
@Kreasy2 жыл бұрын
I love the Mazz chassis! great build and video.
@mazzdesigns69292 жыл бұрын
🙏
@soundmindtv29112 жыл бұрын
Ok, definitely gonna start collecting parts for one of these. Hopefully he gets some more units ready to ship soon.
@mazzdesigns69292 жыл бұрын
I really appreciate the interest 🙏
@randall44112 жыл бұрын
FMX24 has raised some serious interest . Back to the drawing board Axial .
@2fmrc2 жыл бұрын
Yep! I totally agree!
@texomarc2 жыл бұрын
Shout out to MAZZ Designs!
@mazzdesigns69292 жыл бұрын
Thanks texoma
@geoffchambers35892 жыл бұрын
The noise is probably from you overdriving the hell out of it. I'm guessing the motor does make a bit of difference but if you take the overdrive out of the front it will be quieter. Love your content. Please keep it up. It's greatly appreciated.
@2fmrc2 жыл бұрын
Yeah that definitely makes a difference. That’s part of the reason I was just running with it after checking the trans but it still seemed way too loud even for the overdrive lol. That motor is insanely loud in person.
@fcukeround2 жыл бұрын
Mattt, a good friend of mine once told me. Stick with one vehicle and get really good at it. We're not friends any more lol. JK. Keep on Keepin on brother!
@2fmrc2 жыл бұрын
Haha! Can’t be running with negative people like that!
@JPWirt2 жыл бұрын
Awesome build Matt! Thanks for the build breakdown!
@renercadventures2 жыл бұрын
Great video my friend 😊👍
@Pswans5092 жыл бұрын
I heard about them but first I seen. They look amazing!
@rekik662 жыл бұрын
Have you tried filing down a stock screw. The angle let’s it get deeper into the hole to cut threads. You might have bore the hole out a little bit. Using a 1.2mm drill bit.
@soundmindtv29112 жыл бұрын
Good tip, thanks
@rc.remedy2 жыл бұрын
Yeah the micro fpv quad packs are the way to go
@SINNER_012 жыл бұрын
As for the chassis... Man, oh man. I already wanted one. Now... I REALLY want one. I just did my first lcg chassis build with a Mofo 333. Everything went together so great, I'm ready for another one. Now... big question is, can we get one for the Gladiator?
@Kettenhund752 жыл бұрын
I know you said you love this frame, and it's probably between this one and your Hard Park crawlers frame, but other than the bling I'm not seeing it. Yeah, this one is nice and it has some flexibility as far as mounting your links, but the battery still mounts in the back (unless you mount it on the rock sliders). All of the hard park crawlers frame also mount the battery in the back. With these tiny little trucks, weight distribution is everything. The heaviest/highest mounted weight is the battery. In my opinion, being able to mount the battery up front is key. I've been looking hard for a frame that will allow you to mount the battery up front AND has some flexibility as far as mounting the upper links. Looks like the Furitek Grasshopper does both. Have you looked at that one? If I'm way off base on this, please correct me. You do A TON more crawling than I do.
@hellofromsoutheastalaskarc75172 жыл бұрын
Then hook up esc. RADIOLINK recevier transmitter and power hobby pro lipo 450mah 7.4 battery my first time doing electrics
@2fmrc2 жыл бұрын
You got it!!! Let us know how it goes!
@tijdrovers682 жыл бұрын
matt, what bolts/screws did you use? cant find the link in the description
@2fmrc2 жыл бұрын
Sorry about that. Here they are! amzn.to/3nB9gM9
@mazzdesigns69292 жыл бұрын
I actually have hardware kits that will be in stock july 8th on site if you are still in need
@mickeyhavoc9392 жыл бұрын
0:05 I was just thinking about using beads as fake mud!!
@2fmrc2 жыл бұрын
Yeah I thought about tossing something else like that in for some different size stuff to mix in! The bbs from amazon work great though lol
@vincefoley37632 жыл бұрын
Matt, In the screw kit, did you use the nuts in the kit to install the 4-links? I ordered a screw kit and the nuts don't match up with any of the screws.
@2fmrc2 жыл бұрын
Yes I used the nuts that came with it. It looks like they come with lock nuts now. Mine came with just regular ones. I would’ve preferred lock nuts. The nuts don’t fit the screws? Are they just wheel nuts that are included?
@luigavino25302 жыл бұрын
I thought my nano beast 2.0 was already loud enough. Cant imagine the micro komodo is even louder
@rrzrrich2 жыл бұрын
What do you think of the new injora hi clearance link set that is stainless steel will a plastic screw on ball joint and the brass or aluminum balls pushes thru one side, really liking all the fcx24 vids too !!
@2fmrc2 жыл бұрын
I really like them. They seem really smooth at the pivot point. I haven’t installed mine yet but have a set I put together and checked out a bit.
@rrzrrich2 жыл бұрын
@@2fmrc what do you do with the foams that come in the rc4wd scramblers, trim, v notch, throw them out ? Seems still I don’t have the full send wheel weights yet either, still waiting on them to arrive for the stamped steels
@cardboardcrawlersrc88052 жыл бұрын
That piece on the top flap is a bottle opener I think 🤔
@2fmrc2 жыл бұрын
Never really paid much attention to that! I just use my teeth anyway 😆
@mazzdesigns69292 жыл бұрын
Definitely a bottle opener save those teeth matt lol
@tomroethke2 жыл бұрын
Is it even a scx anymore at this point
@2fmrc2 жыл бұрын
Well idk? All Scx24 parts, just upgrade parts lol
@SINNER_012 жыл бұрын
In my most reverent tone: "It's still an SCX in spirit."
@nlhpr112 жыл бұрын
Man kick ass Matt!! I've been trying to get one of them chassis but haven't been able. Don't remember when I last msg the gentleman on the site. The my job won't allow me to. (We keep America going at all hours) Hopefully one day I'll be able to. Keep up the vids Mr. awesome reviews too. Rock on 🤘🏻🤘🏻
@2fmrc2 жыл бұрын
I know that feeling. I work every single holiday usually just because our job never stops either. Covid couldn’t even slow us down 😆
@mazzdesigns69292 жыл бұрын
Jose hit me up on Instagram 🤘
@JustinCurtis24 Жыл бұрын
Great build! Do you think a C10 body with no bed would work on this lcg?
@2fmrc Жыл бұрын
Thanks! I would think so. It may not line up with the sliders like the cliffhanger but it would probably fit pretty well on the chassis.
@4by1002 жыл бұрын
Those are the older Treal oil filled shocks right? I got the Mofo oil shocks and really like the dampening but want more travel... and less leaking lmao. Do you know why they stopped making them? or if they'll ever come back? I really want a set
@2fmrc2 жыл бұрын
The last time I asked I was told they were looking for softer springs to put with them. Which don’t make much sense but that’s what they said. I am running some vlp springs from the old double barrels on mine. These are the only oil filled shocks I’ve ran that are actually smooth and don’t leak like crazy lol
@bobbyherdman243 Жыл бұрын
My first gen kamodo is crazy loud moving forward, but quiet and smoother and reverse. I can’t figure it out
@2fmrc Жыл бұрын
Yeah they are just some really loud motors
@legobuilder26552 жыл бұрын
Airsoft bb mud pit is great idea
@TheShopMiniRC2 жыл бұрын
What’s the name / link to the battery?
@2fmrc2 жыл бұрын
Sorry. Missed it lol. Here it is. They aren’t the smallest I’ve ran but they have great punch and have a better footprint than stocks amzn.to/3ujQnBr
@TheShopMiniRC2 жыл бұрын
@@2fmrc yeah, I might use it for a mini z build. Lol
@2fmrc2 жыл бұрын
@@TheShopMiniRC heck yeah! Should be good for it. I also really like the orlandoo batteries. They are tiny!
@wildman83302 жыл бұрын
What small lipo battery pack are you using ?
@2fmrc2 жыл бұрын
Sorry. Thought I linked it. It’s this one amzn.to/3RhcaUe
@jbbautista64068 ай бұрын
What size are the injora internnal shocks. 32mm or 40mm?
@essy_loser2 жыл бұрын
do you know of any similar chassis to the cheat code that won't break the bank?
@2fmrc2 жыл бұрын
I really like the Hard Park Goblin also. You can get the regular or xl for extended setups. It’s a great chassis that comes with the sliders etc. You can also get the Injora lcg chassis for super cheap and it’s a great chassis. It don’t have the sliders but works really well. amzn.to/3pSzpas
@allansison-da_scx24642 жыл бұрын
I definitely need to get my hands on a Cheat Code. All I hear is nothing but good things about the awesome chassis. Got a question for you Matt. What causes the cogging on the motors? I have the same problem with my micro komodo. But, when I switch to the nano beast, there is no cogging. What's going on?
@2fmrc2 жыл бұрын
I didn’t have any issue with that one until it just died on me. Now it just won’t run correctly. I really don’t know. Figure something internal went bad or a short in the wires. Haven’t been able to find anything for sure causing it though.
@mazzdesigns69292 жыл бұрын
🤘
@jasonbyrd51502 жыл бұрын
How much you want for that bad boy?
@SINNER_012 жыл бұрын
LOL Probably a little more than your gonna have.
@jasonbyrd51502 жыл бұрын
@@SINNER_01 lol. Highly unlikely. But probably more than I'd want to spend.
@wazewaze81852 жыл бұрын
@@SINNER_01lol who dont have 700$?
@jasonbyrd51502 жыл бұрын
@@wazewaze8185 I that was pretty funny myself...
@Mckhus2 жыл бұрын
Okay I get it takes some work to do but 2 flat pieces of metal and 5 printed bits for 100$ 🥶 think I’m good I’ll check the cvds tho
@pooljunki12 жыл бұрын
broke a drive shaft today
@2fmrc2 жыл бұрын
That’s no good! I break them a decent amount myself lol
@kanenbelinske93802 жыл бұрын
Is there a single acc 24 part even I there anymore?
@nooneofimportance70252 жыл бұрын
That decal in the lid of the box looks like a bottle opener
@2fmrc2 жыл бұрын
Yep it is!
@danny3tricks377 Жыл бұрын
Looked like a bottle opener stuck to the lid of the box as well
@2fmrc Жыл бұрын
Yep! Sure is!
@danny3tricks377 Жыл бұрын
@@2fmrc nice touch
@Kettenhund752 жыл бұрын
Bummer - the Dlux Fab shafts are no longer available.
@andrewrichey73742 жыл бұрын
Where are you get them magnetic mount I need a few sets of them any info I appreciate
@2fmrc2 жыл бұрын
These came with the chassis
@gom4ngo7452 жыл бұрын
Matt where did you get the link riser?
@2fmrc2 жыл бұрын
I printed it. There is a free file on thingiverse if you have a 3D printer
@gom4ngo7452 жыл бұрын
@@2fmrc yea no luck there. Finding quality ones has been a struggle
@2fmrc2 жыл бұрын
@@gom4ngo745 yeah my printed ones sometimes strip out after awhile. I wish someone would make a good quality plastic one or aluminum one.
@tylerstedke65442 жыл бұрын
Jec racing makes plastic and brass ones!
@wingnutbert96852 жыл бұрын
@@2fmrc Small block of aluminum, saw, files, drill.......good to go! Be not held back buy digital hand cuffs.
@Js_junkyard Жыл бұрын
Have you compared this chassis to the uglyAF chassis?
@jr719822 жыл бұрын
😍😍😍
@extremercbashers99752 жыл бұрын
Looks like a bottle opener in the top of that box
@2fmrc2 жыл бұрын
Yep!
@TheVonJagger2 жыл бұрын
Is the nano a straight fit onto the Komodo mount?
@2fmrc2 жыл бұрын
Onto the micro komodo mount. Yes
@TheVonJagger2 жыл бұрын
Thanks Matt for taking the time to reply.
@2fmrc2 жыл бұрын
@@TheVonJagger anytime!
@benallbaugh2 жыл бұрын
What are the beads on your track?
@2fmrc2 жыл бұрын
That’s my mud pit! Lol I used a bunch of these for it amzn.to/3IcKEmk
@benallbaugh2 жыл бұрын
Thanks Matt great idea.
@trevorthomas40932 жыл бұрын
You like quiet motors I only run louder electric motors lol
@2fmrc2 жыл бұрын
Why louder?
@trevorthomas40932 жыл бұрын
The biggest problem with electric motors, you can't tell one from another.Now I can.
@Brandon_Wallis2 жыл бұрын
Hey man have you tried the evo 24 chassis?
@2fmrc2 жыл бұрын
No I haven’t. Looks very similar though!
@Brandon_Wallis2 жыл бұрын
@@2fmrc I’ve heard some good stuff about it it’s got a pretty angled skid and can come with a delrin one which is next level
@johngookinsable2 жыл бұрын
It's almost as we have too many options lol
@2fmrc2 жыл бұрын
Yes. There are soooo many chassis now that they are almost repeating each other. This one is pretty unique and cool but there are others very similar.
@2fmrc2 жыл бұрын
Yes. There are soooo many chassis now that they are almost repeating each other. This one is pretty unique and cool but there are others very similar.
@SINNER_012 жыл бұрын
BWAHAHAHAHA!!!!!!! So, how's that FMS compensation going for you and where do I sign up? I want my lifetime payment of one truck. LMAOOOO Man... some people.
@2fmrc2 жыл бұрын
Haha! Exactly! I’m like I basically built this channel off the scx24 and you think I’m gonna start pushing a brand because they give me 1 truck?!!! I wouldn’t have even mentioned the freebie if I was trying to do that lol. I just actually love that truck so far.
@SINNER_012 жыл бұрын
@@2fmrc I'm inove with that truck, too. And haven't been able to order it yet. When I saw the Louisiana license plate stickers, I was sold. I live in South Carolina but, was born and raised in Louisiana... 42 years. I'm definitely what you'd call one of them bona-fide Cajuns. Top it off, that truck reminds me of something you might see someone rolling up to the little boucherie in some backwater community of, say, Gueydan or Whiskey Bay. LOL
@brunodaniel39052 жыл бұрын
if you use the 4mm wide cvd what you put on the rear axle ?
@2fmrc2 жыл бұрын
A set of hot racing +4mm shafts. Forgot to mention those lol