Trying to get her dirt ready. Hilantronic and Send-It servos, xt60 on/off switch, and all the electronic goodies from my 5ive-B. Enjoy!
Пікірлер: 61
@bigjeffrc89233 жыл бұрын
That radio is crazy bro the response is crazy
@CrucialRC3 жыл бұрын
Yeah I love the Sanwa transmitter and reciever. Def a good investment Big Jeff
@RCWalletVacuum Жыл бұрын
Beautiful build Lance!
@CrucialRC Жыл бұрын
Thanks!
@centralkid223 жыл бұрын
Oh yea almost ready for action nice setup bro can’t wait to see the beast run 🔥
@CrucialRC3 жыл бұрын
You and me both Devon.
@maherbeemer23 жыл бұрын
Nice Build!!! Just good info for you and all the others, when you go dual steering you must put your linkages on one of the upper holes on the servo savor, when you go single you use the lower holes, this is very important! Great job and good luck racing!
@CrucialRC3 жыл бұрын
Thanks Maher! Great info brother!
@detroitrcwurks9983 жыл бұрын
She's coming together nicely!
@CrucialRC3 жыл бұрын
Thanks brotha!
@FoundryRC3 жыл бұрын
Love that MCD for the switch I was planning on doing something very similar and I was going to use one of the axis RC tethers to hold it on
@CrucialRC3 жыл бұрын
That's a good idea Mr Foundry RC👍🏽 I may have to steal that idea brotha. Thanks again
@maherbeemer23 жыл бұрын
Foundry we need a video on that rig soon!
@MRBRUSHLESS3 жыл бұрын
Awesome video Bro always good content good stuff on the installation of the electronics great job thumbs up 👍 🤟👊
@CrucialRC3 жыл бұрын
Thanks bro!
@michaellucre82492 жыл бұрын
Nice job bruv!! love me some Hilly servos
@CrucialRC2 жыл бұрын
Wassup Mike. They are some nice servos!
@JOHND_RC3 жыл бұрын
Real nice set up brother!! Next level electronics 🔥🤩👊🏼👍🏼
@CrucialRC3 жыл бұрын
Thanks Big John👍🏽
@JOHND_RC3 жыл бұрын
@@CrucialRC for sure 👊🏼👊🏼👍🏼🔥
@bluegroovemodelsports96503 жыл бұрын
If you solder a bit bigger loop of wire on that xt 60 plug you can easily tie wrap tether it to the radio tray. Great video. I am running 3 futaba standard size digital brushless servos on my new mcd build .
@CrucialRC3 жыл бұрын
That's a good idea bro. Thanks for that Blue Groove Modelsports!
@rcOhio3 жыл бұрын
Wow! Those servos are crazy responsive! Nice neat install man, I would expect nothing less from the Crucial shop! Oh man.. Lance the electrician using Husky side cutters?!?! No Klein? For shame!!! Should just use a piece of jetline as a tether.. make it a true electrician’s whip😂
@CrucialRC3 жыл бұрын
Hey holdup Todd. My Kleins are all in the garage and at work collecting dust. Lol. In the rc cave I am using some lower end tools since they are for the rc. "True electrician whip" 😂
@rcOhio3 жыл бұрын
@@CrucialRC I know brother, just had an opportunity to bust!
@CrucialRC3 жыл бұрын
😂
@CoachD3863 жыл бұрын
Setup looks good bruh 💪🏾💯
@CrucialRC3 жыл бұрын
One step closer CoachD!
@FifthScaleOrBustRc3 жыл бұрын
Hey sunshine! First yo!!! Watchen now lid👊👍
@CrucialRC3 жыл бұрын
I should've known. Lol
@josesrcs7193 жыл бұрын
Crucial awesome vid.... bro those servos are tight man I can't wait to see that rr5 in action bro love that beast 🙌💪... hope to see u running on the next one.. stay safe my dude
@CrucialRC3 жыл бұрын
Damn winter killing me bro. Need some warm weather and dry ground. Hard to find either this time of year but it starting to get better. I'm going thru brap withdrawal too. Lol
I got deuces!! 💪🏾 let’s go crucial get that bad boy goin!!!
@CrucialRC3 жыл бұрын
It's coming bro!
@chayleyton6375Ай бұрын
Hi there .. from the uk … loves the videos and especially ur builds and wht that r u using instead of the on and off button
@CrucialRCАй бұрын
Thanks. You can make them with an xt60 connector or buy something like this. thethomasrc.com/products/kdrc-xt60-nitro-switch-mount-side-only. These aren't the exact ones but similar.
@chayleyton6375Ай бұрын
@@CrucialRC thank u for the link
@tigwelding123 Жыл бұрын
💪🙏✊️💯
@CrucialRC Жыл бұрын
💯
@slaw119753 жыл бұрын
Looking killer! I just ordered an rr5 ftr to go with the 50 gt I ordered as well ! Just curious if the newer 2019 radio tray will have the same figment issues with the servos?
@CrucialRC3 жыл бұрын
Yeah should be the same. They make them so you can fit either size servos. All depends on your servo choice Cole
@maherbeemer23 жыл бұрын
The new servo tray, fits the larger servos directly without dremeling :)
@CrucialRC3 жыл бұрын
Thanks for that👍🏽
@slaw119753 жыл бұрын
Hey lance I need some help with the power switch you installed, is there a place you can order it prewired or did you wire it up yourself? My build is underway finally ! 🤘
@CrucialRC3 жыл бұрын
I ordered it pre-wired from ebay. www.ebay.com/itm/iM-RC-1-8TH-OFFROAD-UNIVERSAL-XT-60-SWITCH-SET-iM051-/233165177713?_trksid=p2349624.m46890.l49286
@SiddonWatson9 ай бұрын
Also, did you use the extension for your battery? To the dark soul harness
@CrucialRC9 ай бұрын
Yes I believe I did.
@rockstarrob88193 жыл бұрын
Where did you get that power switch. Thanks
@CrucialRC3 жыл бұрын
Here ya go Rockstar www.ebay.com.au/itm/233165177713. Took a little while for it to show up but couldn't find it anywhere else.
@patrickfrensdorff7485 Жыл бұрын
what is the size of the default steering servo size? trying to find this info but can not find it anywhere....
@CrucialRC Жыл бұрын
The throttle/brake servo is standard size. The steering is jumbo 1/5 scale size.
@SiddonWatson9 ай бұрын
I know this video was a while ago. But do I have to cut out the middle piece?
@CrucialRC9 ай бұрын
Yessir. I used a Dremel
@SiddonWatson9 ай бұрын
@CrucialRC Well, basically I did the same thing but I did not take out the middle piece. So now the holes for the servo Screws, are not lining up.