Mechanic Reacts to Botched Car Repairs

Рет қаралды 2,408,968

Жыл бұрын

Thanks to Factor for sponsoring today’s video! Use code RMS50 to get 50% off your first Factor box at bit.ly/3I5tYyv !
We asked real mechanics to break down some of the worst "repairs" we found on the internet..
Huge thanks to our experts!
Angelina -- / ms.a_theshopteacher
Sandro -- / mirandas_shop_
Real Mechanic Stuff is a channel from your pals at Donut! We feature all kinds of automotive experts, every week.
1 subscribe = 50+ hrsprs

Пікірлер: 2 700

@parker2121 4 ай бұрын

Angelina: a professional who is chill Sandro: chill to a professional level

@Gizmos_and_stuff 3 ай бұрын

yessssssss

@subarc_ Жыл бұрын

Sandro is always a real one, admitting to all kind of mistakes. Always cracks me up when they ask him what's the most botched thing he's seen, and it's something he did 😂. Super humble

@1337penguinman Жыл бұрын

Honestly, screwing something up yourself is oftentimes the best way to learn. Especially when you have to go back and fix it.

@phoebeeileenbrooks110 Жыл бұрын

Love an honest mechanic. They’re not as rare as people think either. Sandro is a G for real tho

@coastaku1954 11 ай бұрын

His piercings scare me...

@aaronthomas6155 9 ай бұрын

Every mechanic has botched something. If they claim otherwise, move on.

@auniversalmind1658 7 ай бұрын

Learn by doing👍

@ChayChay0510 9 ай бұрын

Nothing raised my respect for Angelina more than her willingness to also play with toy cars on camera, and make the noises. Respect.

@Aquelll Жыл бұрын

Fun fact. The instrument nurse at the operating theater counts every single thing that is used during the operation before and after to make sure nothing gets left inside the patient. And if shit still happens even the bandages used at the theater have a metal string that lights up on an x-ray, so it is easy to check.

@grantflippin7808 8 ай бұрын

It's not supposed to happen, but it does

@lukedean1769 8 ай бұрын

I know nothing about medical procedures, but I was thinking that a system like you described would be useful. I'm glad it exists. But I'm sure its not foolproof either.

@alaric_ 5 ай бұрын

@@grantflippin7808 It's not supposed to happen and it does BUT it is quite rare considering the vast number they are performed each day. With those numbers (globally some 300++ million MAJOR surgeries each year so smaller are not even included in that number), we can easily say they are a non-issue. If someone fears that, i don't know how they can deal with the more common causes of death like just being at home!

@Bowdrie007 Жыл бұрын

Sandro and Angelina need to be permanent panelists on Donut. They are hilarious and have what I call the “fun” knowledge of their craft

@amarbirkumar Жыл бұрын

Brah yessss

@MostHighEmperorPalpatine Жыл бұрын

They are best guests! They have real jobs though lol they actually work everyday probably

@Bowdrie007 Жыл бұрын

@@MostHighEmperorPalpatine I more meant that have them be the two mainstay panelists and have other guests that rotate out. Like some panel game shows do with “team captains”. But yeah I’m sure they’re hella busy

@Angry_Squirrel555 Жыл бұрын

Totally agree.

@Juice83 Жыл бұрын

I petition this for all Donut Media Fans! Let's goooo!!!

@hypercynic Жыл бұрын

These two are my favourites by far. I could just watch them talk about cars all day.

@mickeybuzzkill Жыл бұрын

Was about to say! Love these mechanics 🛠

@TylerTMG Жыл бұрын

Same

@OOLWprufKW Жыл бұрын

Yeah, for sure, these two are the best❤

@MartyrMachine Жыл бұрын

Angelina is kinda dumb. Sandro is the best.

@criticaltemperature3343 Жыл бұрын

Talking cars. I call that "bench racing". Lol.

@JHANKSMEDIA 10 ай бұрын

Yooo that last clip was mine 🤣 btw, the air filter was already split - that’s how bad of condition it was in, and the customer denied the replacement. Bedazzled CLA250 came in for a brake inspection because the fronts were completely gone, almost ate all the way through the pads. Also had 4 bald tires, brake fluid was essentially rusty metal, among other things, all of which were denied other than the brakes because she had none… hence my frustration with this one lol

@adamgh0 6 ай бұрын

Too bad she doesn't live in Pennsylvania. She would have to replace the bald tires and worn pads to pass state inspection. Big fines for getting caught with expired inspection stickers.

@HunterShows 3 ай бұрын

She ain't buying shit...

@capsulate8642 3 ай бұрын

The filter isn't dirty, so the last mechanic and/or you split it on purpose to make another $40? No wonder she doesn't want to pay lol. Could be worse. The last "expert" franchise mechanic I went to crossthreaded a few of my lug nuts as a present, after hearing that I didn't want a $1600 set of tires in order to finish the oil change I asked them for.

@JHANKSMEDIA 3 ай бұрын

@@capsulate8642 lol it definitely was dirty, but that’s besides the point. But properly checking an air filter means taking it out and checking the actual FILTERING side where air is flowing in. Even if the engine side of the filter looks clean, doesn’t mean the other side isn’t dirty or clogged. But in this case, I didn’t tear the filter. It was so degraded already that it was already torn, and it came out in two pieces while attempting to remove the filter to check it. Most techs, including me, get paid flat rate. That would be, at most, probably 0.2 hrs. Not even $5 I’d get paid. So no, it wouldn’t even be worth ripping the filter in half myself to try to sell her a filter. Regardless, if the filter is torn like that, there’s a good chance of large particulates getting right through that opening and the filter is deemed useless.

@boyracer3477 3 ай бұрын

@@capsulate8642 @capsulate8642 Key phrase there was "franchise mechanic". There is no one in that whole business with skin in the game. Probably just an underpaid mechanic is a foreman. Mechanics probably get a commission on new work they ""invent". Go to "Cars and Coffee" and ask around. These are people who love their cars and know good mechanics.

@mrbushi1062 9 ай бұрын

Angelina, " Oh that finger wound is not that bad!" Also Angelina, "Sees skin hanging gags." XD Her and Sandro are the best. Sandro is just smiling and nodding affirming yes he has made mistakes.

@boyracer3477 3 ай бұрын

@mrbushi1062 @mrbushi1062 Angelina just loves life and is a well-trained expert in what she does. She gives the best technical explanations. The guys are great too. Yes, keep this panel together. Now that I've found this channel, I never miss a video.

@kinggumdeng84 Жыл бұрын

sandro and angelina are awesome. this is such a great series..

@Pascquale_ Жыл бұрын

Whenever I see one of them in a thumbnail, I know it's gonna be a banger!

@SunBearDabs Жыл бұрын

And the older mechanic too but I forgot his name

@icepick859 Жыл бұрын

Yeah I just absolutely love those two

@samholdsworth420 Жыл бұрын

Angelina's pretty Hot for a trans woman

@joshreyes8504 Жыл бұрын

Sandro had me laughing at “well I’m metal, I got you “ lol hilarious.

@boatsandhoes2589 Жыл бұрын

Sandro was a little impressed with that rotor 😂

@busystuff23yearsago15 Жыл бұрын

Very I’d say😂the oil pan job too in a way reminds me of a Foxbody where you gotta drop the cross member and a few other goodies to get to it like hey fuck it we don’t need FRAME OR ENGINE MOUNTS

@seanrivera3009 10 ай бұрын

I heard Sandro and Angelina are getting their own show on the Real Mechanic Stuff channel. Cant wait!!!

@EZ3offroad 11 ай бұрын

Angelina and Sandro are great KZfaq personalities! I am happy to see them with the Donut Crew!

@EvilTribble1 Жыл бұрын

That rag is for extra filtration, so be sure to replace it with a clean rag before reassembly.

@ericmills9839 Жыл бұрын

You sir, are living up to your name. Well played. ;-)

@tjlovesrachel Жыл бұрын

We call that a “pre filter”

@dotar9586 Жыл бұрын

Conventional or synthetic rag?

@gatisb1207 Жыл бұрын

@@dotar9586 yes

@josephmother2659 Жыл бұрын

@@dotar9586 polyester blend

@Orangewood76 Жыл бұрын

I find Sandro's unvarnished, brutal honesty so refreshing. "They're lucky that shit didn't fly off."

@Orangewood76 Жыл бұрын

@@Yewtewba Your pedantry is noted. Are you a professional Well Actually, or is this just a hobby for you?

@austinbruce2422 11 ай бұрын

What's the strangest thing youve seen left behind? tools... -_- I left tools... :/ So, tools... :D

@Uncle-Cookoo 11 ай бұрын

@@YewtewbaOP was correct, 15:34.

@mathewsitko4765 11 ай бұрын

13:55 buddy was so flabbergasted that his pupils started malfunctioning

@96bmb 3 ай бұрын

Some scary shit. Probably those dialating eyedrops you get when checking your vision... Or braintrauma lol

@Stop_Pre-Ordering_Video_Games 3 ай бұрын

I saw that as well, I hope he got it checked out because that is scary

@panzerfaust5046 2 ай бұрын

probably a fake eye, they just made the pupil way too large lol

@DixinCyder 28 күн бұрын

We know which side homie does his booger sugar from xD

@sw96 8 күн бұрын

Probably has Anisocoria, it's an eye condition that results in different sized pupils. It can be a benign condition with no real cause, or resulting from an underlying medical problem, or caused by injury or trauma. I only really know about it because my mum has the simple or benign version of it, her only issue is from it is light sensitivity in that eye. Fun fact David Bowie was often thought of as having different colored eyes, but actually had aniscoria too, in his case caused from trauma from a fight he was in when he was in his teens or early 20's.

@IBAKaspian Жыл бұрын

Sandro and Angelina are my two favorite guests of this channel!

@boyracer3477 3 ай бұрын

We also see both sides of how to learn to be a mechanic. Sandro learned by doing it since he was born. While Angelina may have wrenched on cars her whole life, she obviously went to a professional school somewhere along the way. Here technical knowledge is amazing. Both are expert.

@TheGevShow Жыл бұрын

show idea: you guys get a viewer to bring in their build and the mechanics go through their builds. i feel like it could be a really entertaining watch.

@kikilafrite09 Жыл бұрын

thats a brilliant idea

@WillParker322 Жыл бұрын

Pimp your ride. Bring in your beater leave lookin like a cheater.

@Eduardo_Espinoza Жыл бұрын

Will it be like a roast or toast judging style?

@marcr1333 Жыл бұрын

The amount of “I love what you did” with them not knowing what’s holding it together 😂

@gamersmudngrubshow6119 Жыл бұрын

yessssssssssssssssssssss

@ZaWrldo Жыл бұрын

I love how everyone has rallied around Angelina and Sandro as the people's champions and the guys at donut don't disappoint because I love them too Don't forget Paul he's cool too

@cantkillmetal666 8 ай бұрын

Paul reminds me a lot of my own father! I'm sure that's the same for many others as well with mechanic dads.

@electricalfive2248 Жыл бұрын

15:16 actually the 4wd bearing needs the shaft to tighten the nut and bearings. you can see the 4wd hub splines in the video. The 2wd hubs are pre loaded already, You can also see that the 4wd hub used a pair of tapered roller bearings, which are in fact supposed to use the splined shaft for preload.

@WeHateOurJobs 11 ай бұрын

I like to see Angelina on these videos because she's great at explaining things we might not know. She's probably a fantastic teacher!

@beanieguitarguy4070 Жыл бұрын

Angelina and Sandro are definitely my favorites, but I’m a little sad a third guy didn’t make it today! The Lexus/Toyota guy was really cool.

@aztecducky Жыл бұрын

Lexus/Toyota guy? You mean Scotty Kilmer?

@TheAlijator 11 ай бұрын

@@aztecducky Paul, the bald guy?

@MorganH1 Жыл бұрын

sandro is so funny. such a cool guy

@jamesweir139 Жыл бұрын

Funny looking

@TylerTMG Жыл бұрын

@@jamesweir139 no he isn't

@Scottyg8050 Жыл бұрын

He is funny looking, but in a good way

@Kymelean Жыл бұрын

Fuck yeah seems like a mechanic that won’t do you dirty ya know

@manuelito1233 Жыл бұрын

FOR THE BOYS

@itallomagalhaes6621 11 ай бұрын

I wish Angelina was my teacher

@Jonathon10 11 ай бұрын

I’m so glad I grew up with a dad who’s a master mechanic. Always kept my piece of shits on the road, and taught me how not to get screwed by shotty mechanics

@elwinamaya1889 Жыл бұрын

The immediate Tommy Boy reference is just another reason why you guys are awesome.

@gabrielpaddock6305 Жыл бұрын

Tommy Boy reference at 2:40

@tsalazar1981 Жыл бұрын

If I could like this reply more than once I would. Awesome!!!!

@Eduardo_Espinoza Жыл бұрын

@Gabriel Paddock Tnx

@MortalMechanica Жыл бұрын

shook to my very core that they quoted Tommy Boy

@stewpacalypse7104 Жыл бұрын

I’ll tell you what, you can get a good look at a t-bone by sticking your head up a bull’s ass, but I’d rather take the butcher’s word for it.

@swiftsword4221 Жыл бұрын

This channel is so much fun, and a good little bit of enjoyable education for a backyard mechanic. Keep up the good work

@icepick859 Жыл бұрын

Lol backyard mechanic.

@TylerTMG Жыл бұрын

@@icepick859 like some of our parents

@sled_neckx9972 Жыл бұрын

I recently had to deal with a snowmobile (2 stroke) where a guy rebuilt the engine completely but didn't replace a $1.50 rubber oil supply line. Lets say it rotted off and caused a catastrophic failure. If you are that far in an engine, please replace rubber lines. It is cheap compared to having to rebuild it again!

@klystron22 11 ай бұрын

This is such a great channel. Angelina's awesome, I've seen her on other videos. She should be on more regularly. And Sandro is the kind of guy you know you can trust with your ride.

@DRGBTL23 Жыл бұрын

There’s nobody left in the US nowadays worthy of the title of mechanic. I’ve been in parts of the world where mechanics would be able to fabricate, recondition and repair pretty much everything on a vehicle without really needing any fancy spare parts from AutoZone.

@Archer957 Жыл бұрын

Angelina, Sandro, and Paul have to be my favorite guests you've brought on so far (Including the other style videos on the main channel)

@ericwilson9457 Жыл бұрын

Sandro is so chill. Cool dude

@user-kg4br4hs6g Жыл бұрын

So happy for everyone's success all around, including the mechanics who should be rewarded handsomely for adding a lot of new perspective to the channel

@Delekhan Ай бұрын

Your back and forth is hilarious in this video! Love the work everyone puts in to produce these vids. Thanks!

@TheMarioOne Жыл бұрын

It's impressive you guys manage to find real experts who are also great on camera

@gadgetdeez7069 8 ай бұрын

"experts" should be used VERY loosely. They show in many ways that they really dont know much anything and are VERY green.

@stevesuy1551 Жыл бұрын

Angelina is lovely. Her face when she smiles just make you feel happy.

@Angry_Squirrel555 Жыл бұрын

Couldn’t have said it better.

@DutchDuth Жыл бұрын

And she is cute

@plastikk12 Жыл бұрын

Her laugh is fantastic.

@steveafanador6441 Жыл бұрын

She has an awesome smile

@Dozav7 Жыл бұрын

Especially when she cracks up after dude lost his skin 😂

@jasonwells9050 Жыл бұрын

Your contact is amazing it's a lot of fun watching Santos and Angelina's reactions to these so-called repairs

@marcw6875 10 ай бұрын

I know very little about car repair, but I've recently discovered these videos and have been enjoying them. Nice work!

@Jigonometry Жыл бұрын

Please never stop this series and make Angelina and Sandro permanent fixtures!!!!! They’re awesome

@jai_vrai Жыл бұрын

when i see sandro i hit the like button. like the guys got a good vibe

@kharmachaos667 10 ай бұрын

This reminds me of a golfcart we have at work. Kenny has eaten: an extension cable, a wallet and all the cards inside, 2 xlr cables in seperate instances, and a phone that miraculously made it through due to its thick rubber 30 dollar case.

@popsfursmurf 2 ай бұрын

Love you guys, totally impressed. Showing my son tonight Mechanics I in high school. El estilo estupendo.

@dannynicholson6195 Жыл бұрын

Aside from all the laughs, you guys have literally taught me so much and I can’t thank you enough

@tylervanwie6005 Жыл бұрын

Please keep uploading to this channel! These videos fill the gap between donut uploads and it's great.

@armytech8098 3 ай бұрын

The mechanics you guys bring on are amazing. I would love to learn from all of them. Also, I have lost more skin off my hands working on tanks in the Army... I felt that clip.

@Bulletz4Breakfast13 2 ай бұрын

Angelina and Sandro are Literally the reason I watch these mechanics reacts vids. I've worked on cars especially on my Jeeps but I am a Tattooist not someone who normally watches car repair videos but these two are 🔥

@matthewhiggs4805 Жыл бұрын

I know nothing about cars at all but I enjoy this channel because they actually explain things instead of just reacting they explain whats happening and how to fix it. Great channel

@jamiem.9443 10 ай бұрын

That's ok these guys don't either

@8obby0 Жыл бұрын

Anything with Sandro and Angelina, I know I'm learning something. They're fantastic.

@OfficialUSKRprogram 2 ай бұрын

As far as finding a good mechanic goes, I've noticed the more "reputable places", the big brand garages are the worst, dealership garages are the absolute worst, I've had one dealership try to scam me into buying a 1,500$ exhaust for absolutely no reason. Then there are the small garages, there's one that looked up a cheap differential for me, bought it, swapped it for me, and charged me almost no extra, to the point where I wonder if they even made a profit.

@DeepPlane 9 ай бұрын

When I got to the "verify you have the right parts" section, I remembered a story from one of my instructors while I was in college. They were working on a rear wheel drive customer vehicle and it was in need of a new knuckle. They had looked up the part and everything seemed right so they ordered it. Knuckle arrived and everything fit on, but no matter what they did, alignment was always off. Turns out the car was also available in AWD as well, and the two knuckles were very similar. They never told us what car it was so we could keep an eye out for that specific one, but it still gave us enough to go on since everyone likes getting work done right the first time rather than a second or third time. Closest I got to that was a Toyota Tacoma prerunner that needed a sway bar end link and may or may not have needed lower ball joints, I cannot remember too well (while in the same college). If I remember right, the service information said to verify what knuckle we had if it was either over or under a certain month of production as they had simplified production to always use the 4WD knuckles on the front even on RWD only models and this one had exactly that. note: Found the RO from the college program before I sent this, I had saved. It was lower ball joints and a sway bar end linkage (bolt had come loose and hammered the threads flat so you couldn't tighten it back on) sway bar was the last thing we were able to figure out. "clicking from dashboard on passenger side of vehicle" we couldn't replicate it while driving, but managed to replicate it in the shop when one of the other students leaned on the car and we heard the click while standing in front of it and started bouncing the car to find the source. Although my family is a GM family, that Tacoma felt pretty nice to drive.

@dakotablazzer Жыл бұрын

I'm an aircraft mechanic and I am HOOKED on this new channel. I may work on turbine engines but this shit is still so relatable and funny. Plus I actually end up learning things. PLEASE keep this channel going!

@misseselise3864 Жыл бұрын

i feel like there’s some overlap between aircraft mechanics and automotive mechanics

@iHelpSolveIt Жыл бұрын

@@misseselise3864 yeah, the turbines on cars are just a leeetle smaller😂😂😂😂

@bryancline8893 Жыл бұрын

@@misseselise3864 I figure there's more overlap with a boat mechanic.

@Samuri5hit84 11 ай бұрын

@@bryancline8893 There is a good amount of overlap between marine and aviation. Both need to be sealed everywhere, both run on higher rpms with less focus on torque. The main difference in aviation though is that their engines are specifically made for aviation. While boat engines started off as more truck engines modified to marine use. Without the same challenges as aircraft, marine has stayed closer to trucks while aviation had to overcome things like getting cold at higher altitude, less oxygen up there, the chance of rolling and flipping over entirely.

@darthkarl99 Ай бұрын

@@Samuri5hit84 Wel until you get to the super large marine diesels. Those things are just weird, (in a good way).

@Thefabfarm250 Жыл бұрын

The problem with that wheel bearing isn’t clearance it would fit the hub no matter what. The problem is that there’s no axle or stub to hold the thing together it was basically holding on with the seals and a whole lot of luck haha.

@ethanskinner2205 Жыл бұрын

Thought I was the only one

@ravenexi Жыл бұрын

Exactly, she was going on about heat and clearance and I was thinking, theres was nothing to holding it together.

@user-og7xc6zw8p Жыл бұрын

@@ethanskinner2205 same

@TheRedStig 3 ай бұрын

I love Sandro's quick answers after the chat, he's on top of the job 100% no matter what, hes done it already 100 times 😂, and Angelina has that deep book knowledge, probably a wicked diagnostic tech over all, not missing a thing, big props to that

@RangyJoe Жыл бұрын

My gf works with car inspection and today she had a car roll in with one of the control arms SAWED OFF! Her coworker got a car in where the owner said "I hit a curb yesterday and it sounded a bit weird or whatever". 90% of her right front tire was missing (rolled in on the rim), and the tire had just smashed the inside of the wheel well and a bit of the bumper too. She didn't understand why her car didn't pass inspection and didn't think it was a big deal....

@believeinmatter Жыл бұрын

This channel is so good, I’d love to see some of the mechanics from this channel appear on Donut for a video 🤙

@bigduginc Жыл бұрын

They all started with a series of vids on Donut. You can find them there.

@believeinmatter Жыл бұрын

@@bigduginc I know, but I’d like to see them come back for one of those guess the price videos, or for a engine breakdown video.

@Mr6saabs Жыл бұрын

Educational and enjoyable!! Angelina’s and Sandro’s contributions and reactions take it to the next level. Keep it up!

@dhf11993 Жыл бұрын

Replaced the plenum gasket on my 97 ram 1500. A year later I swapped the motor, and when I took the intake off, found a rag I had placed over the spider bracket to prevent debris falling to the cam.

@MoistDredd Жыл бұрын

Sandro looks like a fun guy to work on cars with fr.

@candyman3351 Жыл бұрын

Easy like for the Tommy Boy reference. Loved the way they were able to play off each other like that on the spot. Angelina is the GOAT and super easy on the eyes.

@patrickdiehl6813 Жыл бұрын

I've been turning wrenches on cars (not as employment) for about 45 years and this channel by far is so awesome. It's truly amazing some of the stupid Chit some people do🤣. Keep this awesome content coming, all of us gear heads love it👊

@dreamwolf7302 Жыл бұрын

I do 90% of my own repairs, and 100% of my own 'daily' maintenance. right now, im fixing all the 'make it look pretty' repairs the dealership did to the 2014 4runner i bought last year. To include a Bondo repair on the oil pan, a bondo repair to the leaky master cylinder, bondo on the main brakeline. Four rotors that were clearly just polished to look new, and 4 new calipers that had been WELDED to the mounts. Had to re-thread just about every bolt hole i needed to put a bolt in. My neighbor is a retired mechanic, and one of the best compliments he can give is 'id put you to work in my shop' when it comes to owner repairs on cars. Hes said it to me a few times. Next challenge is going to be finding someone to rebuild my transmission and rear-diff.

@patrickdiehl6813 Жыл бұрын

@@dreamwolf7302 The struggle is real 👊 working on my 99 Dodge 1500 4x4 right now, New SS brake lines then moving on to rebuild of the steering gearbox. But it's not really work if you enjoy doing it 😁

@dreamwolf7302 Жыл бұрын

@@patrickdiehl6813 Oof, i know the Ram Struggle my guy, my last truck was a 2014 Ram 1500 Crew. My Electronic Control Module managed to short out in a way that didnt blow the fuse, but rather welded it into place. All my pumps, my regulators, etc, either seized up, or burned out. I had the option of spending almost 20k to fix a truck worth less than 10k, or trading it in. Got my 4Runner, and while im not pleased with the dealership for covering the defects, none of them are so severe i cant fix them with a bit of elbow grease, and youtube.

@ringo5th636 6 ай бұрын

This channel is such a vibe I love it

@jeremygonzalez2230 10 ай бұрын

Good hosts. Mechanics are the best I've seen so far.

@ciubakka415 Жыл бұрын

I love that you guys use animations whenever things are explained. Thank you! :)

@briffy385 Жыл бұрын

little correction for the 4wd bearing on a 2wd car: bearings with a transmission going through them usually need the bolt from that transmission to hold the outside half to the inside one. so in this case, even with correct size, the side that you wrench or press mount will hold, but the outside part wont be hold by anything and just be teared away by the wheel

@johnmcdonough955 Жыл бұрын

Thank you sir. I am not even a journeyman wrencher but I thought I heard Eric O. mention that some wheel bearings are held together by the axel.

@jasonfields2793 Жыл бұрын

You see it when people remove a broken cv to get home and the bearing collapses on the way

@thorenshammer 3 ай бұрын

Your PSA about being careful reminds me of the time I was swapping out the front lenses on my Toyota Solara. Sometime during the process, I noticed some weird back pain, it ended up being two hyenated disc in my lower back from bending over the car and crawling in under it. I don’t know of any machine operator, Mechanic, or other skilled workers in physical labor intensive jobs that don’t have back problems, it comes with the territory.

@frankhurst9665 10 ай бұрын

They mentioned tools left in an engine. I used to work weapons systems on F4s and F15s back in the 1970s and 1980s. We had to inventory our tools after every job on an airplane. Yeah, I know military discipline is a bit different from civilian, but to this day, I ALWAYS make sure I don't leave them lying around.

@boyracer3477 3 ай бұрын

Thanks for your service !

@Oyrou Жыл бұрын

9:46 basically did that to my arm in a jobsite with a low hanging threaded rod

@wolfic1094 10 ай бұрын

A year or two ago I took my 1998 Dodge Dakota to a shop a block or two from my house to get my power steering leak repaired, I ended up coming back to them 3 different times for a fix that should've taken one time. they did not deliver and I finally got around to getting my power steering repaired a month ago at a different more reputable shop and it was a automatic fix! I HAVE NOT HAD A PROBLEM WITH THE POWER STEERING YET! and I work pizza delivery daily driving my truck for work so I know the fix was good! the first shop couldnt give me a straight answer on what was wrong with it so I automatically should've taken it elsewhere! the second one automatically found and solved the problem and let me know what it was! What was the problem? it was the Rack and pinion.. Glad I found these new guys!

@doubleubee7523 9 ай бұрын

0:42 1:43 (and all the others) Thank you. I know enough about automobiles to let a certified mechanic perform all the work on my automobile. I do enjoy learning how the world works, and want to be more knowledgeable. I appreciate the explanations.

@wizdude Жыл бұрын

i absolutely *love* Angelina and Sandro and they add so much to this series! Keep bringing them back for more please!!

@teamweeshnaww1513 Жыл бұрын

Their is a socket set to remove stripped lug nuts and they work well for most wheel lug locks to remove them when you lost the lug key.

@Demonslayer20111 Жыл бұрын

Yep they are basically socket versions of an e-z out. Reverse thread on the inside.

@CountPantsulon Жыл бұрын

They work on the collared lock nuts too, as long as you can get the collar off first.

@Eduardo_Espinoza Жыл бұрын

Ya, i forget if they were the best on @project farm Priceless content he does! 😃

@DocM. 10 ай бұрын

2:40 I love the Tommy Bpy reference 😂 wasn't ready for it, and rarely hear it 🤣 We love and miss you Chris Farley ❤

@HawaiianDinosaur3123 Жыл бұрын

James and Angelina got me with the Tommy Boy reference 😂 😂 😂

@exceleratorjoshua Жыл бұрын

Sandro is such an OG it would be cool to just hang with the dude. He's one of the boys.

@BayAreaMike99 Жыл бұрын

2:40 Tommy boy love it😂😂😂😂

@andrewward3286 Жыл бұрын

I bought a used 2012 Malibu with just over 100,000 miles.seemed fine.test drive went well.until I needed to change the oil and realized one of the transmission mounts was made out of a scrap 2x4.. didn't feel safe after that but replaced it with a factory original and I still drive it. Love donut you guys are awesome 👍

@makethingsbetter 7 ай бұрын

I really like this channel. Thanks and keep it up, so many giggles and laughs 😊

@rossb5593 Жыл бұрын

This series is something I look most forward to on KZfaq.

@robleavold84 Жыл бұрын

This is a great show by Donut but Angelina and Sandro really make it. Doing it for the boys.

@williamhitzke 8 ай бұрын

Yeah, absolutely loving this channel. Been a donut fan for years and this side channel is fire 🔥

@nuyabuisness7526 8 ай бұрын

9:35 I felt that clip in my very soul. I've got a scar on my thumb from from when I cut it changing my oil filter. It was right on the knuckle too, so it hurt and stayed scabbed over for like 3 months.

@dcv1962 Жыл бұрын

This channel is off the chart entertaining! Love Angelina and Sandro's reactions and commentaries. This was the channel that finally pushed me to get a membership in the Donut Underground. Great work, y'all! 💯🔥😁

@ethanacton408 Жыл бұрын

Such a great series. it's great to see the professionals point of view on a lot of these situations and of course the donut crew

@gennesta9296 Жыл бұрын

Love that mechanic/teacher !! Please more of her!!!!

@RyanStonedonCanadianGaming 7 ай бұрын

2:35 Love the Tommy Boy reference and how it took me the second time of watching this episode to realise, the desktop demo scene. 😂

@philnight9563 Жыл бұрын

I love how you guys made this channel keep it up, but we need a lot more videos. I know it’s not easy to make them but I do appreciate them when they do come out so thank you. 🙏

@walterbryan1798 Жыл бұрын

I always enjoy these episodes! And the guests are quite smart.

@backwoodsrestorations5750 4 ай бұрын

My ultimate hack find was bought a 55 ford truck cheap in the way back from old farmer, had a miss, but ran good. In the checking out problem, one cylinder no compression. Pulled head, whole piston assembly gone, and a fence post peice pressed into hole. I put back together drove for a couple years, and resold...

@winning71able Жыл бұрын

Yall killed me at 9:45 ish. replaced my brake rotors yesterdays and as i was breaking the caliper bolts i knuckled busted tf outta my driveway 😂

@bloopbloop9687 Жыл бұрын

I love the dynamic these guys all have with each other, good content

@PalchikVykin 9 ай бұрын

7:55 Cross Pressure Tightening is actually something I have learned from the PC world ! (Threadripper to be more specific) and 2 years ago now on my little brother's BMW M30 when he was having deep dish wheel problems I actually suggested "hey they suggest this in the PC world so you should actually try Tightening them in a Cross Pattern Style" But I will also say the past year or so of working on my car, If I were being super honest its fairly easy to forget when you want to get that wheel off and back on again and get back to working on other things !

@djscuzzy17 Жыл бұрын

The friggen Tommy Boy reference lmaoooo ohh mahh gawdd Go get them Callahan brake pads😂

@demcomp Жыл бұрын

These two are awesome! I love watching their reactions to mechanical mayhem! It's awesome. Glad you started this channel, and series!

@AlphaRomeoOneFive Жыл бұрын

This is my favorite segment on the tubes. Angelina and Sandro are awesome, keep em' coming!

@the_irish_captain7567 Жыл бұрын

Ice Cream Cone: $2.00 New Car Down Payment: $8,000 9:33 Ms. A's face when James said "It is possible to botch yourself": Priceless Mastercard: Make Life More Priceless

@phalupium Жыл бұрын

I just last weekend pay a tire shop to install large off road tires on my truck. I bought before hand a reputable set of hubcentric wheel spacers that would require them to cut 1/4 inch off the oem wheel studs, but instead cutting they punched in the studs. Of course they also did not tighten the studs, so the wheels were just dangling in the wind.

@vperrino88 Жыл бұрын

That last clip was spot on. I've found this message on several pieces of hvac equipment. Cheers to the mechanics looking out for the next guy!

@ryanshaw7716 Жыл бұрын

See thru brake lines are great! You can tell right away if they’re bled properly 😂

@frankhurst9665 10 ай бұрын

Then try glass tubing at least. 🤣

@Boycott_Wendys 5 ай бұрын

It's a "fake" video, in that they did it on purpose and then put it on line as if it was a real mistake 😂

@breezetix 9 ай бұрын

9:40 similar thing happened to my dad a couple years back, he was tightening (or untightening?) upwards and top of his fingers (between knuckles) hit the metal like that so hard that it actually was so painful he was trying to walk it off for like 20 minutes.