Meet the Carbide3D VFD Spindle Kit

Рет қаралды 37,490

Күн бұрын

This is our long-awaited VFD Spindle Kit for Shapeoko. This is the way to go if you'd like something more powerful and quieter than a standard trim router.
Users have been buying spindles and VFDs from the beginning of the Shapeoko 3, but we only wanted to offer a spindle kit once we could do it right. Doing a spindle kit right includes finding good vendors, doing lots of testing, making it safe, and making it as plug-and-play as possible. We've nailed all of those with this kit.
For more details, see: shop.carbide3d.com/products/v...

Пікірлер: 87

@sebastienbily2331 2 жыл бұрын

I've changed my router to an aliexpress VFD and 1.5kw spindle way back and could not think on going back. Super nice to have that option from the get go now.

@protect.your.digits.creations 8 ай бұрын

Carbide 3 D has the most informative videos for the CNC products. The Shapoeko 5 Pro is the top-of-the-line CNC on the market. I have moved away from Stepcraft CNC because what they show you is not the machine cost you see; you must add features which adds to the price. The Shapoeko is all included except for choice of the spindle of which you have 2 choices depending on your present budget.

@lyric.kayden Жыл бұрын

Just ordered the VFD Spindle Kit and HDZ for my Shapeoko Pro XXL. Suuuuuper excited 😊

@carbide3d Жыл бұрын

It’s a game changer. We love our XXL 4 Pro machine with the VFD. You’re going to love it.

@LaserGarage Жыл бұрын

Just picked this up, can't wait for it to arrive

@carbide3d Жыл бұрын

Going to be the best move you’ve made all year.

@GraphixJunkie 2 жыл бұрын

Awesome upgrade!

@philippeg3 2 жыл бұрын

So cool!

@erikhole4766 2 жыл бұрын

Hopefully a 230v becomes available. Would definetly buy one!

@lylet100 2 жыл бұрын

I see there is a big response for your comment but while there at that “ necessary “ upgrade of adding 230v let’s make the spindle able to accept a 1/2” shank . Now that definitely would be worth waiting for.

@erikhole4766 2 жыл бұрын

I've had a Shapeoko since 2020. Been a valuable asset in our business so far.

@ClintonCarawayPwncnc 2 жыл бұрын

I have a couple of questions. Are the cable shielded and grounded? Is the actual spindle grounded? Is the #4 pin grounded the body? This can be checked with the touching the Bitzero to the spindle body. Is there a way to install a breaking resistor, adjust the torture boost or configure the T1 relay on the VFD?

@MicroFourThirdsCorner Жыл бұрын

Thanks for the video. I know what the spec sheet says (110v 12A) but what is the typical power usage at the wall for the VFD when running at (say) 8,000 to 14,000 rpm?

@slowsloth2519 2 жыл бұрын

What kind of bearings do these have? Is there a runout spec?

@lylet100 2 жыл бұрын

Is there any plans for a 220v- I/2” spindle unit ? Many thanks for your information.

@randyday3278 2 жыл бұрын

When will the liquid cooled kit be available?

@scottcolby9405 2 жыл бұрын

I understand I can’t change rpm on the fly once the program has started. I sometimes need to change rpm due to differences in a length of wood. Am I wrong??

@evolutionlures 11 ай бұрын

How do you measure the distance if this is your first router?

@zakariakhamees 2 жыл бұрын

Is the spindle a permanent magnet motor or an induction motor?

@kelvinlugo1462 2 жыл бұрын

Cuando quitaran la correa a esta versión (Shapeoko Pro)??

@52thephotoshop 2 жыл бұрын

Really ER-11 on a $750 spindle? And you don't seem to provide any spec sheet covering run out or torque curves.

@waynefraser867 2 жыл бұрын

You guys should offer this as a upgrade for recent buyers. I just bought pro 2 months ago..

@waynefraser867 2 жыл бұрын

@@shawnliu2590 it works

@whedge78 2 жыл бұрын

I agree!

@SkySim Жыл бұрын

I recently received my Carbide 3D Spindle Kit, unfortunately I will only receive my Shapeoko 5 Pro in the middle of May 2023. Is there a way to test the VFD and Spindle without the CNC machine to make sure it works?

@carbide3d Жыл бұрын

We guarantee it will work. You’re going to love it with the 5 Pro

@SkySim Жыл бұрын

@@carbide3d I'm sure I will love it, how do I test it with out the CNC? You're skirting the question.

@TheDustyFish 2 жыл бұрын

Cables coming out of two different sides? Really? Please don’t tell me it also suffers from the cable being just barely long enough, like the so3 cables?

@MosquitoMade 2 жыл бұрын

I'm guessing the answer is no, but any idea if this will function on GFCI protected circuits? It seems a VFD that does is not always easy to find... My shop electrical was completed about 5 years ago, and by code has to have GFCI protected 120v circuits. Last VFD I tried instantly tripped the GFCI upon trying to start it

@benjaminbrewer2154 2 жыл бұрын

Would a 1-1 transformer make it less likely to trip?

@MosquitoMade 2 жыл бұрын

@@benjaminbrewer2154 possibly, from my research and understanding, it seemed like most VFD's made quite a bit of noise on start up, which many/most GFCI's would interpret as a ground fault and trip. In my other case, I ended up just switching to 240v instead, which isn't GFCI protected (and powering a 1.5HP motor for my lathe, so likely a better choice anyway)

@carbide3d 2 жыл бұрын

We just plugged a spindle into a bathroom outlet and it ran through a break in cycle just fine. (Held at various RPMs for several minutes) Will confirm tomorrow with a tester if the GFCI was working properly but initial impressions are yes it should work. We do have filtering on the 110V line built into the unit, same as our BitRunner Deluxe. If electrical interference is what is most often the point of failure, that should cover a lot of it.

@MosquitoMade 2 жыл бұрын

@@carbide3d Thank you! I look forward to finding out the tester results, but that sounds promising!

@bluepeakwoodworks 5 ай бұрын

I've been using my Carbide3d spindle kit for a year on a GFCI circuit with no issue. My outlet brand is Leviton.

@jackedupmedic 2 жыл бұрын

Would an install for a 3XXL with Z plus just have the cable laid out like the router? Asking since it doesn’t have the additional drag chain. Also asking cause I ordered one already….🤣.

@WinstonMakes 2 жыл бұрын

That's most likely the case. You could run it through the drag chain, but I would personally probably zip-tie it to the outside. Partly because it's easier, partly to reduce any unlikely (but not impossible) effects of EMI on the other stuff like homing switch.

@jackedupmedic 2 жыл бұрын

Sounds good, thanks Winston…look forward to trying it out…..cheers!

@Zarlax 2 жыл бұрын

As much as I want one, I really just need to get to the SO4 before I throw more money at my SO3. While I wait, where do I need to send the fruit basket to get an OG Winston bake off video comparing the Carbide3d spindle to the Carbide3d palm router?

@AllanScheSar 2 жыл бұрын

Please now an 230 Volt version from it.

@benjaminbrewer2154 2 жыл бұрын

How does it compare to the $200-$300 water-cooled spindle off eBay?

@carbide3d 2 жыл бұрын

Air cooled will be slightly louder, but not by much. Hard to speculate beyond that as quality can be hit or miss. We've tested spindles from a bunch of vendors and what we are selling is one we have had the best experience with and trust.

@SkySim Жыл бұрын

Does anyone know how to manually run the Carbide 3D VFD and spindle, I can't seem to get an answer from Carbide3D.

@alassafcam 10 ай бұрын

This is normal VFD and yes you can adjust manually

@SkySim 10 ай бұрын

Carbide 3D password locks the VFD.@@alassafcam

@crazywolfman 9 ай бұрын

can the spindle go in reverse?

@lwg66 2 жыл бұрын

Just because nobody asked yet will it go in reverse?

@alexon2010 2 жыл бұрын

Vocês poderia criar o programa de vocês open source, seria bem interessante

@dcoff2443 2 жыл бұрын

Before I’m even two minutes in #sold😳

@GTguitarworks Жыл бұрын

Can this be installed on the Shapeoko 3 xxl?

@carbide3d Жыл бұрын

If you have Shapeoko 3 with a V2.3 board and below (Shapeoko 3 machines purchased before Black Friday 2019), you will need to add the Carbide Motion PCB with an enclosure, which includes a new circuit board with the BitRunner connector installed.

@carbide3d Жыл бұрын

The product page is here: shop.carbide3d.com/collections/accessories/products/vfd-spindle-kit

@cadewhite8692 2 жыл бұрын

can you command on and off and rpm with gcode or have to manually start, stop, select rpm with the vfd

@caseyeberle7998 2 жыл бұрын

Didn't watch the whole video huh?

@carbide3d 2 жыл бұрын

The VFD is controlled automatically and digitally through Gcode.

@cadewhite8692 2 жыл бұрын

@@caseyeberle7998 i must have missed it

@user-ps5sw2bn5h 5 ай бұрын

Spindle flashing PoFF wont start even in manual mode MDI restarted redownloaded every thing

@carbide3d 5 ай бұрын

Reach out to Support@carbide3d.com Our staff will get you back up and running.

@JANDLWOODWORKING 2 жыл бұрын

will this work with the stock Shapeoko3 XXl

@carbide3d 2 жыл бұрын

If you have a newer control board with a 6-pin connector (2.4d or later) and a Z-plus or HDZ Z-axis, then yes. The spindle is a little too heavy for the older belt driven Z-axis. -W

@JANDLWOODWORKING 2 жыл бұрын

@@carbide3d sigh I'm out then

@Tx2Aggie 2 жыл бұрын

@@carbide3d Are there installation instructions for SO3? I have a 2.4e board and don't have that connector on the side of my box. Guessing it's inside?

@joshuarenfro125 2 жыл бұрын

@@JANDLWOODWORKING You could purchase the Z-plus to hold the weight.

@kiltedcraftworks4609 2 жыл бұрын

Seriously!? I just got my pro with the trim router like 3 weeks ago. I guess I'll have something to ask for at christmas later this year.

@giantpune 2 жыл бұрын

I was just thinking the same. I've got the pro with their router and bitrunner recently.

@kiltedcraftworks4609 2 жыл бұрын

@@giantpune at 750, it isn't an obvious buy, but there is always a fomo. This thing feels like a beast in wood. I'll have to see how well it does in aluminum before deciding if the big spindle is really a worth while investment for me.

@giantpune 2 жыл бұрын

@@kiltedcraftworks4609 For the price, I think I'd buy the saunders machine aluminum fixture bed before this spindle. I think when moving to aluminum, I'd get more bang for the buck with better work holding than the jump from the router to a 110v spindle.

@kiltedcraftworks4609 2 жыл бұрын

@@giantpune wow, I knew they made fixture parts, but didn't realize they were reasonably priced and came with shapeoko options. I'll have to dig in deeper to what they have available. Thanks for the tip!

@frankwhite675 Жыл бұрын

The HDM comes with this preinstalled, no?

@carbide3d Жыл бұрын

Yes, the HDM comes with a VFD spindle.

@frankwhite675 Жыл бұрын

@@carbide3d 🍻

@phaseonemedical5314 2 жыл бұрын

A little disappointing that they have none in stock after 10 days post launch!

@ammerudgrenda Жыл бұрын

Still nothing available

@miraclecncshop4133 Жыл бұрын

Is it work in canada

@carbide3d Жыл бұрын

Yes

@JonValtandtheEvilRobots Жыл бұрын

Man I don’t know. I don’t trust “soft” switches. If it wouldn’t mess things up, I think I’d have a physical kill switch before I EVER touch a spindle that’s just waiting to burst into action. 😳😬😬

@jsincoherency 2 жыл бұрын

Everyone shows how you insert the collet into the nut, noone shows how you get it back out!

@Robinlarsson83 2 жыл бұрын

Just push it from the front with your thumb, the collet doesn't require much force at all to pop back out. I don't this exact spindle, but on my ER20 its very easy to get them back out :)

@jsincoherency 2 жыл бұрын

@@Robinlarsson83 Absolutely does not work on my ER11 collets. I welded a bit of peg to an old pair of pliers to help me apply more force to push them out and it's still a ballache.

@carbide3d 2 жыл бұрын

You need to push from the front, but also rock the collet back and forth from the back like a thumb stick on a game controller to pop it out of the groove that it's seated in.

@Batendor 2 жыл бұрын

It’s a shame that it only runs on 110v outlets 😞

@shirothehero0609 2 жыл бұрын

That's what step up/step down converters are for. 😉

@Batendor 2 жыл бұрын

@@shirothehero0609 True. But what about Hz and the amount of wattage needed to ensure the spindle works as intended? The idea of my comment is that Carbide made it clear on several occasions that they’re not interested in international markets. Smart ass 😉😉😉

@SlowedSonics Жыл бұрын

@@Batendor he was just trying to help you dork.