Mercedes A150 w169 Intake Manifold Removal Gasket Replacement

Рет қаралды 84,514

4 жыл бұрын

Here is a Playlist with other videos about this car :
• Mercedes w169 A150 Man...
Removing the intae manifold from this Mercedes it is much easier than it looks like . If you follow this video step by step , you will remove it without major difficulties .
The most important thing to look for is to not round uo the torx bolts since it will be extremply difficult to remove them even with special tools since there is limited space to work on .
Disclaimer :
This youtube channel :"doit_vehicles " can not guarantee that this information suits to your car . "doit_vehicles " assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk

Пікірлер: 55

@doit_vehicles 4 жыл бұрын

Short Video on How to remove Stuck Bolts : kzfaq.info/get/bejne/fppzo5tkrbLMo4k.html

@fjwiyfjzkwlohhdhwkl 3 жыл бұрын

Thanks for the great instructions, I was able to do a plug and coil pack job on a w169 a160 based on this and your other video. However, for this engine it was easy enough to change the plugs, coil packs and cables even without removing complete manifold. I just removed until throttle body and the following manifold bracket, and after that it was still doable. I think removing manifold and fuel rail would have been too much trouble compared to the benefits. But thanks again for the great videos!

@whatsupshittafabraans1926 3 ай бұрын

I started this job without half the info, only got past throttle body and told my mate, this is too big a job to do in a couple of hours, leave it until weekend, he crashed it next morning, thankyou god.

@chsemaphor 2 жыл бұрын

That's crazy how much of work.

@brunocerasi2428 Жыл бұрын

Thank you for posting this video. Huge help for me to get to the starter. Good video.

@hanspearson174 4 жыл бұрын

Excellent video, but what a complicated job - thanks you.

@doit_vehicles 4 жыл бұрын

You're welcome

@3dScience8 4 жыл бұрын

Great video. I am planning to swap the timing chain and it is very helpful (the previous months, i removed and cleaned the throttle body and changed the ignition coils but i havent removed the intake and your video makes it much easier. Many thanks)

@ReRey 3 жыл бұрын

This is a complete school❤️ Congrats for amazing video

@agussutriono5463 3 жыл бұрын

Thank you...from Indonesia🇮🇩

@ahmadbaik4642 2 жыл бұрын

Hallo pak Agus. Itu daftar kuncinya apa aja ya pak.

@ZR6BST 2 жыл бұрын

Brilliant work!!

@paulpeeters2356 17 күн бұрын

Great video!!! 👍📸📸

@davidedaprile4501 4 жыл бұрын

Grandioso! Mille grazie 🙏😍

@belinhazego6060 4 жыл бұрын

fabulous man. thank you

@rickadrian2675 4 жыл бұрын

Excellent video. I will watch it again when i need to do my spark plugs. My 2005 A200 has 145k on the clock and i will have it for a while longer.

@doit_vehicles 4 жыл бұрын

That's cool !

@Mandingobull 6 ай бұрын

do you have a part number for the tiny round gasket on the manifold?

@MercedesW169 2 жыл бұрын

Thank you for the video! I also shoot about this car

@dawnstorm 4 жыл бұрын

Thank you so so much. Great video which will help me for sure! :)

@doit_vehicles 4 жыл бұрын

Awesome !

@dawnstorm 4 жыл бұрын

@@doit_vehicles I hope the will be as much space in our turbo petrol engine a200 turbo :D Summer is coming and so the fun working on cars :D

@doit_vehicles 4 жыл бұрын

@@dawnstorm 😂💪

@H.B213 7 ай бұрын

How much tightening torque for the intake manifold is it 20Nm ??

@Bertamirans255 4 жыл бұрын

Thanks

@ssh6565 3 жыл бұрын

Good work, thank you. We can appreciate a video about alternator belt.

@MoesKeckeEcke 3 жыл бұрын

Thank you very nice! I need to replace my starter fk.. in -5°C this helped me alot to repair stupid starter, made klick but no start

@saho9029 Жыл бұрын

Did you get the starter out like that? I have to do it on my b200 136hp too. Did you have to remove more or was it enough to get to the starter like in the video here?

@davidedaprile4501 4 жыл бұрын

Merry Christmas, happy holydays

@doit_vehicles 4 жыл бұрын

Happy Holidays to you too

@robcrawford1328 2 жыл бұрын

Why did you change it? What were the symptoms? I hear a rattling noise at around 3k rpm and it changes when I push the manifold. I wonder, is this the intake manifold gaskets?

@davidedaprile4501 4 жыл бұрын

hello dear I ask you for information. what is the EVAP solenoid at minute 3.40 ? what's the use? thank you very much for all your tutors

@doit_vehicles 4 жыл бұрын

Hi ! The EVAP selenoid will allow the vaccum from the intake manifold to basically suck the fuel vapors accumulated in the EVAP canister . In that way the gasoline vapors will not be wasted and it will not be released in the atmosphere

@peterbalogh1936 2 жыл бұрын

@@doit_vehicles Dear Doit_vehicles! I got a tick-tick noise from that place, i read some information about that EVAP solenoid can do that if its wear out. What do you think? Did u heard something like that?

@angeloboccaletti6401 10 ай бұрын

SE IL VIDEO FOSSE IN LINGUA ITALIANA SAREBBE STATO UTILE

@EricArregi 5 ай бұрын

I have a problem. I think that the engine have a vacum lose. When I release the throttle, it cost a lot to down the rpm and in the midle stops and goes down. Anyone knows how to fix it?

@Pier1668 3 жыл бұрын

Can you do a video where you show where is the blow off valve of the Mercedes a class w169? And where are all the connectors of it please

@doit_vehicles 3 жыл бұрын

this car does not have a turbo

@Pier1668 3 жыл бұрын

@@doit_vehicles oh okay sadly, because mine it has and I’m struggling, thanks for your response

@Jesusgm29 Жыл бұрын

Para el 180CDI es igual?

@Sagadiniz 4 жыл бұрын

I was thinking of changing the spark plugs myself but it's too much work for me, maybe in the future

@doit_vehicles 4 жыл бұрын

Maybe ..

@ReRey 3 жыл бұрын

😂me too

@saho9029 Жыл бұрын

I changed the spark plugs without removing anything.

@jetonnuholli2901 3 жыл бұрын

Hello Sir! Needed to know if the manifold body gets hot while driving due to the recirculation of the gases caming from tho engine. thanks in advance!

@doit_vehicles 3 жыл бұрын

Yes it will get hot also from the engine

@jetonnuholli2901 3 жыл бұрын

doit_vehicles but Sir my car b class b170 hardly gets hot, I could say it stays cool, what does that mean?

@jetonnuholli2901 3 жыл бұрын

I mean the intake manifold hardly gets warm

@jetonnuholli2901 3 жыл бұрын

Also, while driving there is to much noise for the 👂 to hear.

@doit_vehicles 3 жыл бұрын

@@jetonnuholli2901 is it a diesel ? You mean the collant temperature stays cold ?