That really works! Thanks for this video. It was my lucky day because i seen that and finally fixed my car :D

You guys are the BEST! Thanks for posting this video! VERY helpful!

I disconected the cable runs like a boss..thank you mate

Do I need to remove throttle body or just spray cleaner when engine is running

Good work. Sir

Test the air flow potentiometer with multimeter for voltage when engine idiling pin 1,2- 0.7V +- 0.1V The problem is that it probably worn the resistive material in the potentiometer and need to replace it because it gives the signal to the computer (ECU) and sends a signal to the stabilizer minimum valve (IACV).

Good..job.sir

Hey guys I was experiencing same problem I applied everything you suggested and it works perfectly fine but the idling sounds was higher But otherwise it's great

same problem and turned out to be fuel pressure regulator

I have a problem with my mercedes w124 3.0 petrol, it works unevenly, what should I look for

cleaning the throttle also helps

Alhamdulillah..ini yg Kita namakan....Malaysians buddy...Syabas n Tahniah...ALLAH SAYANG

How to change automatic gearbox for.this car please help

Umm..late to catch on, but could you explain what was wrong how was it it determined and fixed?!? Please please please

The same problem. My car. Please solusion.

hellow, after buying this old benz did the ower clean the FUEL tank, tank filter , replace FUEL filter and on the FUEL line nipple filter etc on the engine side

OVP Relay or just the fuse on the OVP relay ?

Can’t spraying all that crap into the air filter housing cause problems to the engine?? Thought we didn’t want anything in there but oil.

عندي نفس المشكله محرك 300

M102 owner here, had same problem, solve it by replacing potentiometer and disconecting ICV, runs on 1000rpm and it didn't stall for like 2 yrs now

Great video. Did it jerk when putting into D? I have that same jerk, do you think it's caused by your idle air control valve problems or is it unrelated?

Hey man, i wanna replace the fuel injectors on my 190e and im kinda new to working on my car. How did you remove the air filter housing? I removed the 3 bolts holding it in place. Kinda scared to remove the move the breather tube (most to the left of the 3 removable parts when looking at the air filter housing) should i just pull it out with a lot of force?

I also have problem about the idle my mercedes w124 300e the rpm working too high with stay on 900rpm

Hi bro, bole guide utk w124 230e, lepas panas enjin... oil temp turun 3 ke 2 dan 1. Idle jadi kasar...

I have a e34 bmw and just picked up A w124 260e for $650. It runs weird but it's pretty quick

Brother: 1 owned W124-260E 1988 since 1993, the car is not on daily uses for the past 5 years. Problem: 1. It is easy to start but engine will knock & stop at the first hard press 2. If the engine continue ok- but after about 30 running idle, the engine stop & can not restart . After about an hour the engine can restart. Please advice

what do you use on the throttle body?

hi i am a teknician i am problem face my car 10 minute car start for heat 120%

yg pake kacamata logatnya indonesia

What spray u use bro

Que motor tiene

bro my 124 start the time rpm too high always stay at rpm 1500-2000

Timing ch

pigs working on a db? no chance