Mercedes Benz 7G Electrics (conductor) Plate Replacing

Mercedes Benz 7G Electrics (conductor) Plate Replacing - Part 2 of 7G ECU Electrics Plate

Рет қаралды 55,981

Күн бұрын

In this video we will be replacing the electrics (conductor) plate on the 7G transmission. See how to remove it for rebuild or replacement. See parts 3 - 4 for the remainder of the procedure
Mercedes-Benz 722.9 transmissions, also known as the 7G tronic, have been in production from model year 2003 to present. This 7 forward speed transmission with 2 reverse gears has been known to have some common problems that require servicing of the internal, valve body and ECU electrics plate. Please be aware that the ECU plate is a theft deterrent part on vehicles fitted with this 7G transmission, and a locksmith license (LSID) will be required when purchasing Theft Relevant Parts (TRP).
When a fault occurs in the ECU electronics plate also known as a conductor plate, fault codes for the Turbine Speed Sensor may be present along with symptoms like; improper shifting, Limp Home Mode all accompanied by a malfunction indicator lamp (MIL). For a complete description and list of possible fault codes please refer to our help document or contact support.
Error Code 0717 - The signal from component Y3 / 8n1 (turbine speed sensor (VGS)) is unavailable.
Error code 0718 - The component Y3 / 8n1 (turbine speed sensor (VGS)) is defective.
Error code 2767 - The signal from component Y3 / 8n2 (Internal speed sensor (VGS)) is unavailable.
Error code 2768 - The component Y3 / 8n2 (Internal speed sensor (VGS)) is defective.
iSCAN makes complex functions simple. Check our other videos and articles for more helpful tips and procedures for Mercedes-Benz vehicles.
iSCAN sf: www.iscantech.com/iscan-sf/
iSCAN: www.iscantech.com/
Need help with a diagnostic issue. contact iSCAN Support On Demand SOD: www.iscantech.com/sod/

Пікірлер: 44

@nigthalive Жыл бұрын

The best series of videos for remove the #valve #body #722.9. Easy and clear steps and instructions. Amazing

@AutolandScientechUSACedarPark 11 ай бұрын

Thank you!

@kenxiong6830 Жыл бұрын

Thanks for providing the torque specs. Most videos left this important information out

@AutolandScientechUSACedarPark Жыл бұрын

Glad it was helpful!

@HuuNguyen-jj6rp 2 жыл бұрын

very clear instruction

@AutolandScientechUSACedarPark 11 ай бұрын

Thank you!!!

@alexanderstefanxandraswedi5835 2 жыл бұрын

Good job sharing

@AutolandScientechUSACedarPark 11 ай бұрын

Thank you!!

@tomtymons5758 3 күн бұрын

Did you use new fasteners on the ECU or the pan?

@junaidawan2879 Жыл бұрын

good information

@AutolandScientechUSACedarPark 11 ай бұрын

Thank you!

@junaidawan2879 Жыл бұрын

i like you video

@AutolandScientechUSACedarPark 11 ай бұрын

Thank you!

@BROREACHOfficial Жыл бұрын

Great mechatronics

@AutolandScientechUSACedarPark 11 ай бұрын

Yes!

@jzabehlrodriguez3991 5 ай бұрын

how much is Newton meters in Inch pounds? great video by the way

@AlvaroHernandez-uv2eb 5 ай бұрын

How do you convert Newton meters to inch pounds?

@richmcadams1418 Жыл бұрын

Can I take the plate out of the broken trans & put it in the new,used trans & it will work ?

@AutolandScientechUSACedarPark Жыл бұрын

No, needs programming.

@user-ic5hg4tb9u 3 ай бұрын

Do you know which one those solenoids is the "D"Circuit. I have a p2759. hard shift occasionally.

@AutolandScientechUSACedarPark Ай бұрын

You can use a wiring diagram for your vehicle to identify the solenoid in question.

@roothegreatest5476 10 ай бұрын

Hi Thanks for your video Would mind if you let me know how solenoids are numbered? I want to change the solenoid number 3 Thanks

@AutolandScientechUSACedarPark 10 ай бұрын

What is the year and model are you working on? I can see if I have that info.

@roothegreatest5476 10 ай бұрын

@@AutolandScientechUSACedarPark thanks for your replying 2014 A class 1.8

@d-rockpain4250 Жыл бұрын

what keeps oil from coming in the conductor plate side of the plug? I seem to have oil in my plug, but new rings do nothing. Seems it would need a seal on the back of the plug on the conductor plate side. Has anyone seen similar? Plz help 😢

@AutolandScientechUSACedarPark 11 ай бұрын

That is an internal leak in the part. You can't seal it with an O-ring, needs a new plate.

@realworld822 6 ай бұрын

If this fails, would I have a check engine light or any light in the dash?

@AutolandScientechUSACedarPark 4 ай бұрын

Yes.

@EsshaDiallo-mx8lp Жыл бұрын

How do you program this valve bory

@AutolandScientechUSACedarPark Жыл бұрын

See part 3 of this video.

@thomascurry3930 Жыл бұрын

Please! gaskets don't fail just use the old one but tighten DIY tight with real hex head screws discard theirs. Tricks of the trade

@AutolandScientechUSACedarPark Жыл бұрын

That is incorrect. Rubber and plastic degrades. Please replace gaskets.

@Davideo10 9 ай бұрын

I am an apprentice mechanic in all auto Mercedes Benz I need more more learning and the solution to the problems I may come across the conductor plate

@AutolandScientechUSACedarPark 8 ай бұрын

Keep an eye on our youtube channel for more Mercedes-Benz content!

@ulflei Жыл бұрын

How to do you marry it to the transmission (coding)

@ericedberg2104 Жыл бұрын

Please see the video for step 3 - coding/programming with iSCAN - kzfaq.info/get/bejne/rr2SjZNh1ae8iGg.html

@thomascurry3930 Жыл бұрын

Submerge in 5 gal of gas shake it over and over and watch what comes out of it. That's your problem dirty transmission. I have a custom S550 I did it and the key started working again and transmission is fixed. So now you see that your neutral switch connection was dirty.

@AutolandScientechUSACedarPark 11 ай бұрын

See the video for step 3 - coding/programming with iSCAN - kzfaq.info/get/bejne/rr2SjZNh1ae8iGg.html

@AutolandScientechUSACedarPark 11 ай бұрын

Thank you, Eric.

@AutolandScientechUSACedarPark 11 ай бұрын

Thanks for the info.

@willcalderon1990 11 ай бұрын

U don’t show how to connect the plug

@AutolandScientechUSACedarPark 11 ай бұрын

We do in the following parts of the video, where programming takes place. This is due to the old pate being plugged in to pull the data from, before plugging in the replacement one.