Пікірлер
@carlosgayoso9868 11 сағат бұрын
I have to change the whole seatbelt or just the black tensioner?
@C20letPanamera970 2 күн бұрын
❤👏👏👏👏👏👏hvala ti
@tomtymons5758 7 күн бұрын
Did you use new fasteners on the ECU or the pan?
@veilsideride Ай бұрын
bodyshop cracked my lens and assembly on passenger side. so its not as easy as replacing the parts? who outside of the dealership can replace the part and reprogram it? im not getting suckered for 2,200$.
@AutolandScientechUSACedarPark 28 күн бұрын
Any independent repair facility with an iSCAN device can replace it.
@veilsideride 27 күн бұрын
@@AutolandScientechUSACedarPark benz try’s to hit their drivers for 2,300$ for headlight replacement. You can buy a replacement light and program it for half of what they charged us their drivers.
@christianmgtow4744 Ай бұрын
Does anyone know if the fpc will function without the crash data signal hooked up?
@AutolandScientechUSACedarPark 12 күн бұрын
No, it will not.
@DaveWebb Ай бұрын
You say in the video you can make the adjustment with the wheel installed. But surely to access the adjuster you need to have the wheel off? Or are you thinking that we just need to remove one wheel stud from the wheel and adjust through the wheel bolt hole?
@AutolandScientechUSACedarPark Ай бұрын
Yes, you can remove the wheel stud and work through the hole in the wheel. Just need a longer tool.
@DaveWebb Ай бұрын
@@AutolandScientechUSACedarPark much appreciated!
@iamwhoiam5640 Ай бұрын
I'm from Indonesia
@AutolandScientechUSACedarPark 12 күн бұрын
Got it, thanks
@iamwhoiam5640 Ай бұрын
Thank you autoland. I have iSCAN 3e. how do i extend my software subscription
@AutolandScientechUSACedarPark 12 күн бұрын
Reach out, we can help. www.iscantech.com/contact-us/
@cgarturo Ай бұрын
Conquien puedo hablar para ver lo de la actualización
@cgarturo Ай бұрын
Nunca me dijeron que el equipo ya no se puede actualizar
@cgarturo Ай бұрын
Son unos rateros nunca me dijeron que mi iscan2wt ya no se puede actualizar
@jasonxiao4965 Ай бұрын
Hi, thanks for the info. My c63 driver side led running light (the strip) is not working but the headlight has no damage and looks perfectly fine, so I just need to replace the control module? Or I need to replace the whole headlight
@beaujohnson2021 Ай бұрын
Where do I buy vedis 4?
@AutolandScientechUSACedarPark 12 күн бұрын
www.iscantech.com/contact-us/ Reach out and we will get you one!
@JKadison 2 ай бұрын
Great job! When you need help, S.O.D. is the answer!
@AutolandScientechUSACedarPark 2 ай бұрын
Thank you for the comment. We have seen what a great service it can provide and love hearing the success stories.
@vahanbazikyan5787 2 ай бұрын
how match sod in gm cars
@user-jg3ld2mr5d 2 ай бұрын
I have Topix subscription, the vehicle successfully connected, but i haven't Diagnostic option at the main screen... Could you please tell me that im doing wrong? Thank you!
@AutolandScientechUSACedarPark 2 ай бұрын
Are you connected using your ISCAn device?
@den5619 2 ай бұрын
no, using jlr oem vci
@AutolandScientechUSACedarPark 2 ай бұрын
You'll need to purchase a Module Programming Subscription. It comes with diagnostic and programming software for both DDA and SDD platforms.
@den5619 Ай бұрын
@@AutolandScientechUSACedarPark thank you so much!
@MannyG-ki4xu 2 ай бұрын
Great breakdown of diagnosing this fault code. It really has helped me tackling my issue. Which one of the fault codes did the car have? I’m having the 290900 code with air mass to high. The data shows that air mass is higher than air mass nominal. Im curious since the last thing I haven’t checked is that backpressure pipe.
@AutolandScientechUSACedarPark 2 ай бұрын
Let us know what you find!
@MannyG-ki4xu 2 ай бұрын
@@AutolandScientechUSACedarPark took it apart today and exhaust pipe is clear with no soot or carbon build up. What can I check when air mass is lower then air mass nominal? Any suggestions would be really helpful!
@Likesubscribable 2 ай бұрын
Where do i buy this to upgrade my brabus amg gl450?
@AutolandScientechUSACedarPark 2 ай бұрын
Reach out to us: www.iscantech.com/contact-us/
@qusaykambal6903 2 ай бұрын
Very nice video iqm trying to test this water pump with Arduino if i success with it i will upload the link of the video
@AutolandScientechUSACedarPark 2 ай бұрын
Ok. Thanks
@Georgemusadzi 2 ай бұрын
What the name of the machine you are using
@AutolandScientechUSACedarPark 2 ай бұрын
www.iscantech.com/iscan-sf/
@JKadison 3 ай бұрын
Excellent video, thanks Eric!
@AutolandScientechUSACedarPark 3 ай бұрын
Thank you!
@abdulrashid9264 3 ай бұрын
Great job ❤
@AutolandScientechUSACedarPark 3 ай бұрын
Appreciate the feedback!
@lokyblack3379 3 ай бұрын
Thanks for your support autoland
@AutolandScientechUSACedarPark 3 ай бұрын
We're glad to help!
@Oshaad1 3 ай бұрын
Hey I’m trying to buy one of these, cant find the purchase section on your website.
@AutolandScientechUSACedarPark 3 ай бұрын
Reach out to us and we will get you one: 1-877-833-4728
@robertmobileman8304 3 ай бұрын
Awesome video , great explanation of testing , thanks
@AutolandScientechUSACedarPark 3 ай бұрын
Thank you for watching and the feedback! More to come!
@RyanColby1984 3 ай бұрын
Couldn't get this to work on my Volvo S60 2023 Recharge. Maybe they changed it. Its mentioned nowhere in the owners manual or warranty/service manual!
@AutolandScientechUSACedarPark 3 ай бұрын
Volvo does list this as the procedure for that model vehicle. I would check that it is being performed correctly, if it won't reset. You will likely need to perform it using a scan tool.
@kwintberg 3 ай бұрын
Any info on the recalibrating of the sensor available?
@AutolandScientechUSACedarPark 2 ай бұрын
We hear most techs do not need to calibrate it here in the US. We don't currently have that video. If necessary, it is done via ISTA using iSCAN IMS2 connection.
@claytonolive5416 3 ай бұрын
I just got a I scan 4 with all ims2 included but my JLR interface option shows SDD not Topix am I missing something or is this a different software I have not had a chance to test it with Topix yet
@AutolandScientechUSACedarPark 3 ай бұрын
We sent you an email regarding your comment. Check your emails, and get back to us.
@leocheckup6645 3 ай бұрын
Aqui no Brasil não temos esta opção J2534 !
@AutolandScientechUSACedarPark 2 ай бұрын
Reach out us: www.iscantech.com/contact-us/
@AndyTheGoon7 3 ай бұрын
i cant order just one of these?
@AutolandScientechUSACedarPark 3 ай бұрын
Yes, visit iscantech.com
@user-ic5hg4tb9u 3 ай бұрын
Do you know which one those solenoids is the "D"Circuit. I have a p2759. hard shift occasionally.
@AutolandScientechUSACedarPark 2 ай бұрын
You can use a wiring diagram for your vehicle to identify the solenoid in question.
@isalmankhan1 4 ай бұрын
What an important video, Thanks for sharing & keep up the great work iSCAN Team👍🏻👍🏻👍🏻
@AutolandScientechUSACedarPark 2 ай бұрын
Thanks for watching!
@LoveKindSunshine 4 ай бұрын
Do you have to do this or can you just replace the LPFP without coding? I've got CEL P008A P0087 and P2540, Mercedes-Benz Technical Service Bulletin Topic number LI47.20-P-061013LI47.20-P-061013 seems precisely the issue, along with the 15% fuel light come on, but not only is the in tank images of possible leak points different in my GLK 350, every hose i can inspect seems fine. Replacing the LPFP removes P008A, but P0087 and P2540 persists, not setting off the CEL, but in the background, is this coding? Replacing the LPFP also makes fuel injector 2 leak a little from the added pressure, need a new seal there. Would that set off a P0087?
@AutolandScientechUSACedarPark 2 ай бұрын
Yes, it has to be performed.
@user-ic5hg4tb9u 4 ай бұрын
I have a p2759 code. I read it could be transmission fluid, a bad electrical connection, or.......please comment thanks
@AutolandScientechUSACedarPark 2 ай бұрын
P2759 means that Torque Converter Clutch Pressure Control Solenoid Control Circuit Electrical has been detected.
@andrewhurst1472 4 ай бұрын
Thank you for this. The part number of the kit you installed would be a helpful addition to the video or your comments.
@AutolandScientechUSACedarPark 4 ай бұрын
The parts are VIN specific. You will want to use your specific vehicle info when ordering parts.
@bomanp 4 ай бұрын
Can this make the car to not start if it's not done? Changed valve cover and eccentric shaft sensor but now the car just cranks and tries to start/ignites but won't actually start..
@AutolandScientechUSACedarPark 2 ай бұрын
Possibly, if the Eccentric shaft was damaged or in the wrong position when reinstalling.
@amarepatton9209 4 ай бұрын
Can you use a used bmw steering angle sensor? If so what different thing will I need to do?
@AutolandScientechUSACedarPark 2 ай бұрын
Not recommended.
@franklinz9758 4 ай бұрын
Is it the same or similar procedure on a 2010 x5 diesel
@AutolandScientechUSACedarPark 2 ай бұрын
Similar, not the same.
@muhammedcevdedgali8238 4 ай бұрын
thanks master…may you tell me please wheres the location of Hood open/close sensor for benz 2009 W204.
@simplelangperorock 4 ай бұрын
Hello, Where do I get that scanner?
@AutolandScientechUSACedarPark 4 ай бұрын
Reach out to us! www.iscantech.com/contact-us/
@OmarUnikel 4 ай бұрын
Sirve este escaner para volvo o es menos especializado que el escaner VIDA?
@mascho22 4 ай бұрын
I need to do this on my N26 F30 and sorry for dumb question but: what does "switch on terminal 15" mean?? and also: What is terminal R ?
@AutolandScientechUSACedarPark 4 ай бұрын
Ignition in ON position. So the check engine light is illuminated with the engine off.
@mascho22 4 ай бұрын
@@AutolandScientechUSACedarPark Neither process, Learn limit or Start-Up will run on my Autel scanner!? The servo motor makes the clicking noise when car wakes up and I have a permanent code 135808 but NO check engine light AND engine runs fine. With Learn, scanner says starting conditions are not met, either VTC relay has not applied or engine speed not exactly 0. Remedial is start/stop engine, wait 10 seconds and proceed. I do that and same shit...conditions not met. With Start-up, I hit F1 to begin and next screen says End service function. Is it likely I cannot run either process because of a faulty VTC servo motor?
@jzabehlrodriguez3991 5 ай бұрын
how much is Newton meters in Inch pounds? great video by the way
@AlvaroHernandez-uv2eb 5 ай бұрын
How do you convert Newton meters to inch pounds?
@andywoods6169 5 ай бұрын
Is this necessary on a 2014 Porsche Cayenne ?
@AutolandScientechUSACedarPark 2 ай бұрын
Yes
@andywoods6169 2 ай бұрын
@@AutolandScientechUSACedarPark thank you for the response, would you be able to confirm I programmed mine correctly? I used a scan tool to set the new parameters- Then the next time I checked the battery module with the scan tool it did not show that new info that was input
@jaromor8808 5 ай бұрын
1:55 Anyone knows a video where it is explained what to connect the wires to?
@jaromor8808 5 ай бұрын
apparently 1) positive to the positive terminal on the battery 2) negative to the car itself (a ground stud) somewhere further away from the battery itself
@AutolandScientechUSACedarPark 12 күн бұрын
It is connected to the vehicle jump start / power terminals under hood.
@Itsdicemoney 5 ай бұрын
Does the ground strap from ecu to chassis stop it from shorting? Is that step necessary?
@AutolandScientechUSACedarPark 4 ай бұрын
Yes, it is necessary.
@texasrdm 5 ай бұрын
Dealer installed a new battery under warranty, then battery light started coming on. I was not able to take off work, no nearby dealers. I just unplugged the sensor on the negative cable. Battery light on dash is now off. Driving five years, no problems. Now, need another battery, will go to Costco to get AGM and I will leave this sensor unplugged again.
@AutolandScientechUSACedarPark 2 ай бұрын
Your charging system will not be able to operate correctly (as designed by Volvo) doing what you described.
@NopDemo 5 ай бұрын
Does it support to SCN coding VGS4NAG2 TCU Mercedes FBS4?
@AutolandScientechUSACedarPark 2 ай бұрын
Reach out for specific VIN questions: www.iscantech.com/contact-us/
@HotTvify 5 ай бұрын
Do you need any tools to remove the panel below steering column
@AutolandScientechUSACedarPark 2 ай бұрын
Yes
@mayowaodus6310 5 ай бұрын
Where is the right place to purchase the iscan
@AutolandScientechUSACedarPark 4 ай бұрын
Direct: www.iscantech.com/contact-us/
@lorenzofranchi4291 5 ай бұрын
Hello, I have a MY23 Land Rover discovery sport p300e. It’s equipped with the analog/digital cluster display/speedometer but I’d like to update/retrofit to the full digital one. This is possible using your device? If so can I use a used one or I need a brand new oem part. Thanks a lot
@stevesimkins3918 4 ай бұрын
best use a dedicated jlr tool