Mercedes CLS Locking wheel Nut
Рет қаралды 175
4 ай бұрынA very non productive day. I set out to renew the brake pads in my Mercedes CLS 320...it didn't go well !!
@stevendcruze7395 12 күн бұрын
I've just had this exact problem on my CLS320, tyre fitter for the previous owner has buzzed all the nuts on to a ridiculous degree, it took all 16 stone of me on the end of a 3ft bar to crack the hex bolts loose so obviously the locking nut snapped just like yours. I've got hold of a new key but not sure how I'm going to get this locking nut out! I've got some reverse thread female stud extractors coming so hopefull they work...
@61special 12 күн бұрын
@stevendcruze7395 I don't understand why mine were so tight, I put them on myself and I never overtighten them. If they needed to be so tight the car manufacturers would supply a longer wheelbrace. The best way to get them off is to split the outer ring with a good quality sharp steel chisel then use the stud extractor. Hope that helps.
Royalty Auto Service
Рет қаралды 1,2 МЛН
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 547 М.
Arrowhead Garage
Рет қаралды 122 М.
Zulfiqar Ali 1
Рет қаралды 30 МЛН
EXiAN BATMAN / Dont Touch My Bike
Рет қаралды 4,2 МЛН
EpicShortsRussia
Рет қаралды 1,3 МЛН