Mercedes Crankshaft Pulley Harmonic Balancer and Seal Replacement DIY W211 E320 E500 M112 M113

  Рет қаралды 14,035

Father and Son Fix

Father and Son Fix

10 ай бұрын

Mercedes Crankshaft Pulley Harmonic Balancer DIY for Mercedes-Benz vehicles including W211 E320 and E500. Also applies to other Mercedes with M112, M113 and M113k engines including ML320, ML500, S500, SL500, C280 and more.
This is good preventative maintenance and you can see the rubber was already starting to deteriorate on our pulley.
There is plenty of information on the Internet about this repair, we put together this video to show you the tips and tricks that are going to make it a breeze to complete.
It's tough to fit a camera, light and wrench in this location, so we've captured videos of each step to guide you.
Of course, proceed at your own risk, and always work safely in a clearly lit environment. Thanks for watching, please like, subscribe and share if this video helped you!
Subscribe to our channel: / @fatherandsonfix
✇ 🏎️🔧 More Mercedes DIY Repair and Maintenance Videos:
✇ Mercedes Crankshaft Position Sensor Replacement DIY - Step by Step Guide with Tips and Tricks | • Mercedes Crankshaft Po...
✇ Hack Your Car's CAN BUS System - SUPER EASY - Mercedes Hacking DIY - Send & Receive Data on Can Bus | • Hack Your Car's CAN BU...
✇ Mercedes Power Steering Flush and Reservoir Replacement W211 E320 E500 E55 M112 M113 Engines | • Mercedes Power Steerin...
✇ How to Replace Mercedes Door Sill Scuff Plate Trim - Father and Son Fix | • How to Replace Mercede...
✇ How to Repair MB-Tex Cracks Using a Leather Repair Kit - Mercedes Upholstery Repair DIY | • How to Repair MB-Tex C...
✇ How to Reactivate Mercedes SBC Sensotronic Brake Control with Star DAS Software for W211 and Others | • How to Reactivate Merc...
✇ Mercedes W211 4Matic Sway Bar Replacement Tip to Save Hours of Time E320 E350 E500 | • Mercedes W211 4Matic S...
✇ How to Remove Mercedes E320 E500 W211 Door Panel DETAILED STEPS - Father and Son Fix | • How to Remove Mercedes...
✇ How to Deactivate Mercedes SBC Sensotronic Brake Control with Star DAS Software for W211 and Others | • How to Deactivate Merc...
✇ Secret Way to Change Your Car's Oil - Super Easy - Automotive DIY - Mercedes E320 W211 and More Cars | • Secret Way to Change Y...
✇ How to Replace Mercedes Door Sill Scuff Plate Trim Part 2 - Replacing Clips | • How to Replace Mercede...
✇ Mercedes Engine Air Filters Step-by-Step Replacement E320 E350 W211 DIY + Cleaning AEM Dry Filter | • Mercedes Engine Air Fi...
✇ How to Replace Mercedes Hood Struts Supports - Step-by-Step Automotive DIY - Super Easy | • How to Replace Mercede...
✇ #1 Mercedes Tool - Must Have Tool for Working on Mercedes-Benz in Your ToolKit | • #1 Mercedes Tool - Mus...
✇ How to Replace Mercedes 2005 E320 E500 W211 Cabin Air Filter Step-by-Step EASY | • How to Replace Mercede...
✇ 3-D Printing a Car Part to Fix Our Mercedes!! 3-D Printed Plastic Bushing Saves $$ Fixes Seat Wobble | • 3-D Printing a Car Par...

Пікірлер: 22
@brokerbrian1327
@brokerbrian1327 9 ай бұрын
Great video! Quick and to the point with some good tips and tricks. I have the same tool/pulley dilemma as well, so I will be doing some grinding, it appears, today when I take on this job.
@fatherandsonfix
@fatherandsonfix 9 ай бұрын
Thank you! Good luck with your repair, let us know how it goes.
@j14phe
@j14phe 2 ай бұрын
Excellent exactly as you showed perfect Thank you John
@fatherandsonfix
@fatherandsonfix 2 ай бұрын
You're welcome, John. Glad it helped!
@BenzAddiction
@BenzAddiction 2 ай бұрын
Great video, thanks mate.
@fatherandsonfix
@fatherandsonfix 2 ай бұрын
Thank you, that's a honor from you! We love your videos.
@mtl2010ps
@mtl2010ps 5 ай бұрын
I believe I have a m272 engine on a c300, would the procedure be the same?
@fatherandsonfix
@fatherandsonfix 5 ай бұрын
Yes, the procedure is the same. The tool and part may look slightly different. Always double-check part numbers and instructions for your model.
@ukiarni5011
@ukiarni5011 9 ай бұрын
Hej. What size wrench does the pulley bolt have? 
@fatherandsonfix
@fatherandsonfix 9 ай бұрын
27mm
@lanbanh7477
@lanbanh7477 9 ай бұрын
hi, would this work on a 2011 ml350?
@fatherandsonfix
@fatherandsonfix 9 ай бұрын
Yes, the steps will be similar. You will want to check the tool and crankshaft pulley are correct for your model. You should have the M272 engine. Leave a comment with tips for your model to help others that have the same vehicle.
@GC-lz9tu
@GC-lz9tu 10 ай бұрын
What is the mileage on the car at this point?
@fatherandsonfix
@fatherandsonfix 10 ай бұрын
We had about 199k on the car when we replaced the pulley. It looked like the original pulley! We've put about 500 miles on it since then with no issues.
@michaelbrueckner3893
@michaelbrueckner3893 5 ай бұрын
can any body tell me what a M112 is? is that the W211 ???
@fatherandsonfix
@fatherandsonfix 5 ай бұрын
M112 is the v6 gas/petrol engine, M113 is the V8 engine.
@michaelbrueckner3893
@michaelbrueckner3893 5 ай бұрын
I HAVE A HARMONIC BALANCE WITH FIVE HOLES IN IT {2009 mercedes e320 bluetec 3.0 diesel. the pins in holder will not line up with the balancer i have. FIVE HOLES IN BALANCER.
@fatherandsonfix
@fatherandsonfix 5 ай бұрын
Thanks for your tip which will help others with the E320 bluetec. If the three pins don't line up, you could try measuring to see if two of the pins will line up, then grind down one. However, it may best to look for another removal tool.
@michaelbrueckner3893
@michaelbrueckner3893 5 ай бұрын
the pins on tool should be 72 deg
@michaelbrueckner3893
@michaelbrueckner3893 5 ай бұрын
right on with that 72 deg . now how do i find the tool i need. i need too get my money back and get right tool...
@fatherandsonfix
@fatherandsonfix 5 ай бұрын
@@michaelbrueckner3893 Yes 360/5 = 72. The tool we have is 360/3 = 120. We thought if you could shave the sides to get the 120 out to 144, but probably not. We've seen people weld their own tools before. There are also universal holders that adjust.
@phillipparker3762
@phillipparker3762 9 ай бұрын
👍 "PromoSM"
Mercedes Crankshaft pulley replacement, 4 methods of locking the pulley.
12:16
Smart Sigma Kid #funny #sigma #comedy
00:40
CRAZY GREAPA
Рет қаралды 29 МЛН
What it feels like cleaning up after a toddler.
00:40
Daniel LaBelle
Рет қаралды 87 МЛН
What Harmonic Balancers Do and Why You Need One!
25:09
MotoIQ
Рет қаралды 69 М.
Pulley Vs Harmonic Balancer
4:50
Black Dog Motorsport
Рет қаралды 10 М.
When A Gang Leader Confronted Muhammad Ali
11:43
Boxing After Dark
Рет қаралды 5 МЛН
Camshaft & Crankshaft Position Sensors, Mercedes M112 & M113 Engines
18:50
Easy Crankshaft Pulley Lock Torque/Removal
3:57
HowYouCanDoItToo
Рет қаралды 223 М.
SL55 AMG Gets New Crank Pulley Installed (m113k)
26:30
ND_72
Рет қаралды 1,3 М.
РЕЗКА РЕЗИНЫ ДЛЯ ШИН
0:40
MakkClips
Рет қаралды 9 МЛН
Manual installation process of highway guardrail
0:15
mianxiwei
Рет қаралды 28 МЛН
Бмв сгорела , это нормально?
1:01
NAVI ТРЕНЕР
Рет қаралды 1,5 МЛН