Mercedes E class mirror gasket seal, Complete how to remove and re- install a new one in 10 minutes

Рет қаралды 96,511

7 жыл бұрын

To purchase on amazon Click here ( www.amazon.com/dp/B06WVDHJBC )
To purchase on E Bay Click here
www.ebay.com/itm/272661527949?...
These come with a one year warranty....
Made and imported from Germany.
Replacement Side view mirror rubber seal trim, gasket that comes without mirror assembly fits Mercedes E class w211 years 2003, 2004, 2005, 2006 , models, E320, E350, E500, E55
A note (Dont buy the junk from china or Taiwan)

Пікірлер: 56

@TheEdwardStigma Жыл бұрын

This guy goes ahead a lot, but I like it. Nice work

@jamiealvarez3845 2 жыл бұрын

Simple and easy fix. Make sure the area where the gasket is in contact with the body gets cleaned well before the new gasket is installed. Much appreciated guideline

@orcordero 5 жыл бұрын

Excellent job of presenting the set by step directions. I had seen another video where the individual removed the screws without removing the shell and he had the spring working against him. It didn’t look right but you made it look easy and it really saved me some aggravation. Thanks!

@alemarba 5 жыл бұрын

Thanks for the info! Just find out a couple of weeks that this job was needed on my E500 and this video provides all the details for a successful replacement!

@davejohnson3860 3 ай бұрын

Worked like a charm.. Future reference. Use the long screw driver to open up your existing hose on new gasket..screws will love you! Nice vide both sides done in 35 mins

@erictold 7 жыл бұрын

Wow. This is the thing I'm going to do tomorrow. I ordered the parts weeks ago. You save me. Really thanks.

@matthewricarte2009 Жыл бұрын

Not one to normally work on cars but this video made it easy to execute confidently. 👍

@derrickgburr6686 6 жыл бұрын

Thank You!!!! My replacement job when amazingly well thanks to your attention to detail

@lw4mma 3 жыл бұрын

Great video. I just did this on mine. One tip I can give for people: Instead of cutting the hole on new gaskets to get the wire harnesses through, you can use needle nose pliers and open them inside the hole to expand it and slide the wire harnesses through. It's easy if you can set the pliers open on something to keep outward pressure or have an assistant.

@JB-zb9zo 2 жыл бұрын

Maybe even add some heat with hairdyer? (Not too much ofcourse)

@PARDS2 Жыл бұрын

GREAT TIP !!!

@robertehlers4330 11 ай бұрын

:Not really i did that a if you not careful you will rip it like i did woth needle nose

@SuperRealwood 5 жыл бұрын

Excellent video! What a difference a camera on a tripod makes. Nice calm pace helps also. Well done!

@fraeharrubah6503 2 жыл бұрын

Very informative and clear. Thank you and i wish all instruction videos are like it.

@woosheroes494 7 жыл бұрын

Thank You very much for your video. Helped a great deal.

@malakulppi 6 жыл бұрын

FYI -on the driver side turn the mirror inwards all the way prior to attempting to remove the mirror cover(mirror bblocks the removal otherwise)

@carlosquintana1657 Жыл бұрын

excellent video! thanks for posting. This is an annoying issue I've had for years and I am finally going to fix it.

@seshachary5580 10 ай бұрын

VERY EDUCATIVE. tHANK YOU REGARDS

@SparkRoomProductions 4 жыл бұрын

Awesome video. 2 things I will note. On my 2006 E55, I had 5 point TS20 security torx screws. Had to order the bits from Amazon. Also instead of electrical tape, I used a hot glue gun to seal around the wires.

@chickencurry1435 2 жыл бұрын

Same here. Can’t BELIEVE how hard it was to find the TS20 at a local hardware or. Auto parts store!

@ahmadj1267 Жыл бұрын

Thx for mentioning I was looking also for this answer. I couldn’t remove the screws in all ways. I’ll order that ts20 for sure.

@hoanguckhiem5555 5 жыл бұрын

Excellent video. Saved me big $. Thanks

@chickencurry1435 2 жыл бұрын

Thank you for this video. Other than my Homeresque hunt for a TS20 bit, the work went off without a hitch thanks to your instruction. My 06 E55 AMG thanks you!!

@typhoon2970 Жыл бұрын

Thanks for posting

@AnitaHandjob 3 жыл бұрын

Bought both of mine for less than $18 bucks! Thanks for the tutorial. Well done sir! Also, new subscriber here. As an owner of now a W211, a W140 and a C140, I look forward to future videos! Keep up the good work!

@Aresv_ 3 ай бұрын

Where did you purchase the gaskets. From his links? If so, dammm, inflation 😂

@AnitaHandjob 3 ай бұрын

@@Aresv_ …aliexpress ALL DAY SON! I just looked em up for you just now…$10 BUCKS! Go buy that shht homey!!

@ronnyiannucelli908 2 жыл бұрын

Thank you so much for this one

@lostinsdf 4 жыл бұрын

Excellent video. thank you.

@glendawyatt9300 3 жыл бұрын

Just what I need to do thanks !

@jibmaster 5 жыл бұрын

Good stuff! Thank you!

@colinaglae2605 6 жыл бұрын

Good video. Very informative!! Would be nice to know how to fix folding problems!!

@erikhallford1218 5 жыл бұрын

VERY GOOD PRESENTATION. CAN YOU DO THE PANORAMIC SUNROOF CABLE REPLACEMENT?

@carolinagomez2797 Жыл бұрын

What size Allen key do you need to remove the mirror. Excellent video

@robertehlers4330 11 ай бұрын

You make it look easy not that easy man

@veronicareyes3062 5 жыл бұрын

Good exelent

@konasteph Жыл бұрын

On the w211 up tp 2006 (I have a 2006 E320 CDI) there are several different types of anti theft screws in use. On mine, even though I have the torx with the center hole I was quickly disappointed because Mercedes was apparently using 5 star torx screws. But they are available on ebay and Amazon...its just buying ANOTHER doohicky that you will rarely use again afterwards,

@mechcntr7185 3 жыл бұрын

Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you ! Subscribed!

@oldtimermike1414 4 жыл бұрын

I'm trying to take the shell off a loose 2004 E320 mirror. There seems to be part of the internal casting that blocks access to the spring clip. There's no way a flat screwdriver can get it to move down and become unclipped because the force of the spring that's pushing the clip back in position is so strong you can't get it to stay unclipped.

@robertehlers4330 11 ай бұрын

How you put the spring back in you took it off

@barbaraproctor1586 5 жыл бұрын

Great video! I have a 2006 with anti-tamper screws. Do you know what size Torx bit I need?

@SparkRoomProductions 4 жыл бұрын

You need 5 point TS20 security torx bit. Never knew that 5 point torx existed until I this job.

@terrijones4160 3 жыл бұрын

I have a 98 E320 and need to replace both gaskets as well as adjust the spring on the passenger side. Do you have any recommendations?

@luissaldana-ruiz9083 5 жыл бұрын

Thank you for the link. I got my replacement gaskets and I will be installing them tomorrow. Do you have a link to buy the driver's side mirror? It is faded now and I can't find the right one. 2004 E320 heathed and diming.

@SeamHead33 4 жыл бұрын

check junkyards I got the whole unit for $50, mirror and housing