Mercedes S Class W221 & CL550 4MATIC | How to Replace the Front Air Strut Suspension

Рет қаралды 37,321

Күн бұрын

Installation process for our Mercedes Benz (4Matic) S Class W221 & CL550 Front Suspension Front Strut Assembly 137M-27-F | 137M-28-F.
We offer parts for the Mercedes Benz that are both manufactured to the Original Equipment and Re-Manufactured. Our parts are a perfect replacement for the faulty air strut assemblies in your Mercedes.
Our catalog covers primary suspension components for your W221 & CL550 air suspension system, air compressor, and kits to convert to a standard steel coil spring suspension. With years of automotive experience and a dedicated technical support team, we can help you repair or convert with ease, whether it is by phone, email or even on our website.
Fronts 137M-28-F - Brand New
suncoreindustries.com/product...
Fronts 137M-27-F - Remanufactured
suncoreindustries.com/product...
Our Website:
suncoreindustries.com/
#suncore #w221

Пікірлер: 21

@mikedee2412 Жыл бұрын

I love the step-by-step instructional video that you put up it means a lot to a lot of people don't know the technical terms or even how to go about it I myself have been a mechanic full of a 45 years and I applaud you on showing people step-by-step what needs to be done in a way that basically a five-year-old could understand LOL but that's a compliment keep up the good work bravo

@c.h.r.i.s2253 2 жыл бұрын

You don’t need to remove the clip to the connector just push it in and pull the connector out or in

@donharris1615 9 ай бұрын

Hello, great video! I followed your step by step video however I am stuck at putting the new airstrut back in, it won't go in easy as it came out. Did you use some type of tool or pry bar to move something up top like the control arm connections? It's hard for me to line the top of the strut with the three mounting screws into the holes of the car. It seems like the control are bracket is preventing me from getting a new strut all the way up in there? I hope they sent me the right strut, it definitely looks the same as the old strut side by side. I ordered new airstrut off eBay. So if you have time please respond I need to know did you pry something to fit the new airstrut back into place?

@COOLGEEZ1981 Жыл бұрын

Bro they you made this look way too easy.. great video..

@alexanderstefanxandraswedi5835 2 жыл бұрын

Good job

@kaibinrubber Жыл бұрын

nice

@garyzhu9311 2 жыл бұрын

Spray a lot of WD40 on to the bolt. Let it soak over night, came off easy the next day.

@ORA-0774 Ай бұрын

it is very very tight

@Jerry.V 3 ай бұрын

at 5:43 with my car the thing just keeps spinning, do you know anything to stop that from happening?

@rjack987 5 жыл бұрын

did anyone have a tough time removing the bottom strut from its housing? the bolt came out easy but the bottom bolt is lodge in the bottom control arm and just won't budge..... any advise?

@SuncoreIndustries 5 жыл бұрын

Hello and thanks for viewing our video, for the bottom bolt you probably need an impact wrench to get it loose.

@jamestysinger8452 4 жыл бұрын

Are you talking about the bottom strut to the control arm? I am having difficulty removing the entire strut. Everything is disconnected but the bottom of the strut wont come out of the lower control arm. Seems like an easy task but shoot.

@rottdogsparky 4 жыл бұрын

@@jamestysinger8452 I'm having the same problem I'm wondering if you ever got yours out?

@jamestysinger8452 4 жыл бұрын

rottdogsparky yes I did. I had to put heat on it and it came right out. Took about 15 min total. Smh. Should have just done that first. Lol.

@rottdogsparky 4 жыл бұрын

@@jamestysinger8452 I used a big hammer and crow bar 6 good hits and it popped out