w210 Vaccum Lines : kzfaq.info/get/bejne/Z55onNOGz8nSnGw.html

Really good video, I've learned more in 5 minutes than many youtubers can teach in 1 hour!

As always very simple and helpful. Thank you!

Good advice, and some simple DIY jobs to save money, well done.

I like your way to start with a specific topic but you explain everything that is related to this topic . VERY useful videos , even for my CDI 270 engine . THANK YOU VERY MUCH and greetings from Italy

Very informative. Thanks.

Tnx bro i finding my maf sensors 🎉

Thank you

Good job 👍, thanks

thanks for good video.

Great video. Very usefull for current owners of that car. How was the engine runing after that cleaning? Power was back steady?

Thanks. HELLO from BAKU...

very nice

Hi, thank you so much for your video. Could tell me which is the OBD II scaner that you have used in this video? I have a MB Clsse E 270 cdi w210 216 Thank you . .

w211 2.2 cdi 2008 . car has no power, won’t go up to 3000 revs. looks like turbo dsnt work . i tred many motkshop but they cant find problem . i know many people whose strugles by this problem . have you any idea ? 🥺

I appreciate. VERY GOOD.I WANT TO SEE HOW YOU REMOVE AUTOMATIC TRANSMISION.THANK YOU.PLEASE.

super. thanks

Hey, I had exactly same way sensors. Thank you. Shouldn't after IAT and the other sensor require agr cleaning if oiled?

Thx ❤❤❤

Thanks men

o ring box super

Thank you very much

Hi, what size oring did you end fitting on that sensor? Thank you so much for this video so complete!

Helo, i want to know which is the voltage of mass air sensor when the car is in idle, and when the car is acelerated to 2500rpm, please?. I think that my mass air sensor not works good. Thak you

Hello How to check MAF and IAT sensors? How to be sure that sensors work properly? I make mistake and I cleaned up MAF and IAT sensors in my car by the universal clean fluid. In addition I don't posses OBD2 diagnostic unit.

Hi man and you do realy good job 👍 I have question.. why the steering wheel is hard when I drive but not when the car is stop and the engine running Benz 2004 class e e 220 cdi and tnx

Air intake temperature sensor on my car has the wires cut, runs and pulls great but what could be the simptoms without a workint AIT senzor working properly?

Hey, thanks for the video, would you mind to share the link or reference of this case with O rings for buying it? I need several (like for the oil separator, MAF sensor among others) Thanks a lot, my MB is getting better each day thanks to your videos :D

Hi! Very nice videos, man, thank you very much! I'm driving the same W210 220 CDI and I have an issue with the car not accelerating as it should (still accelerating, but I think it can do a bit better) and the engine starts to wroom a lot and it gets pretty loud after 130 km/h or 2600-700 rpm. I'm suspecting air or turbo issue, does it make sense? Thanks!

Podrían ponerlo en Español por favor... muchísimas gracias

Hello , i have bougth a obd cable similar to that one, but without sucess on a w210 year 2000 220cdi,. Did it work with you??

Hi, which size is the o-ring for the last sensor?

Hi, thanks for your video. Your diagnostic tools and his adaptater work with all system of car (abs, airbag..) or just with the motor sensor ? Thanks for reply, best regards, GL, w210 270 cdi

Does the 611 have swirl flaps like the 646 🤔

Thank,s

Bonjour pourquoi la durite qui va à la vanne EGR est coupée ??

Hi, I have 0m613 and a problem with limp mode. I have discovered that if I unplug the maf sensor I get boost back albeit about 70% but if I plug it back in it goes into limp mode. I have replaced the maf sensor and the air temperature sensor , installed a egr shunt but still, it only works when the maf is unplugged...🤔 🤦‍♂️🤷‍♂️ Any input would be greatly appreciated 🙏

Hy I've got a C220cdi w202 and it's starts after a lot of starting and after 1-2 minute idleing it dies like no more fuel inside. It has white smoke and a lot of bubbles in the fuel system before the filter from the tank already.

Hi I have a problem with my 290td , that the turbo works , but when we do kilometres he disable the turbo , I think it is maf

Can i use brake cleaner spray for this?

Hello, first of all thanks for your video. I have a problem on my 320 cdi 2001. When I drive my car to long way, after a certain time the turbo is not working. I mean, the solenoid valve which is on the turbo is stopping the working (vacuum). When I stop and run the engine again it gets fine but after a while it gets same problem again. It is not doing it in city drive, and if it is cold outside I am not facing with this problem when I'm driving to long way. Do you think that it can do this problem because of the maf and iat sensor? Thanks.

Where is intake temperature sensor 2 in w211 220cdi? Thanks

I have a problem on a W203 220 CDI with black smoke even on normal acceleration 0-50 km/h, car has full power I believe, doesn't feel slow but I don't know what the cause of the black smoke is, could it be the injectors or the sensors? The injectors had the o-rings replaced a while ago and the car is throwing 0 errors on diagnostics. Additional info is that the car sometimes idles weirdly when its on operating temperature, it loses rpm for one moment and a puff of black smoke comes out but then goes to normal and does that a couple of times when standing still, not always though. Any help would be appreciated.

in my w211 regim stoped in 30 tr/min is this the problem !!!

Tachometer dluctuate at idle very little, can you give me an idea whats wrong please 🙏!?

Helo my mercedes w210 e 220cdi 1998 year have problem The turbo does not open in 2.5k rpm as it sould. And wen it reach 120kmh at 3 rpm stops bosend go more!! Wat cant it be?

I've got problems with heating inside of myne w203 c220 cdi, wat can it be? The ventilation is OK but no hot air camping out.

Hi man are you from sweden?

Hello. my car e 220 cdi om 611 motor.143 ps. When driving with my car, the gas suddenly cuts off and does not exceed 2000 cycles. kick down doesn't work either. I'm stopping the car. it gets better after running it again. It does it again after 5/10 km. We connect it to the computer, the fault does not appear. where is the problem

Did u have codes or not?

My car is 220cdi w203 and have a oroblem, can not take more than 2000 rpm when drive, is it can be the mass flow air sensor? Thank you

which one is the atmospheric valve sensor ?

my car doesnt more than 2000rpm in the third gear even if i press the pedal all the way.What shkuld i do?

Sir my car e 270 doesnt rev upto 3000 rpm when i accelerate to full gas pedel what can be the problem . The mechanic told me to change the gear oil and transmisson filter i changed but then also i couldnt see and response. Again he told me that turbo is week and the TCM is not sending any response. Can u plz helpe out what can be the problem. The car is running quite good but when i have the gas pedel to the ground it doesnt go to that speed at a glance

J'ai une voiture avec une mauvaise réponse de l'accélérateur à 80 vitesses lorsque le moteur s'arrête et que le redémarrage est de nouveau au pouvoir

My engine vibrates a lot

Sometimes my e220 cant rev over 3000 rpm