Mercedes W212 E63 m157 B Service, Inspection, Brake fluid

Рет қаралды 6,757

SPR Autos Mercedes Benz Service & Repairs

4 ай бұрын

Thanks for watching please like and subscribe, follow us on instagram - sprautos.
here is a link for another video we did on a SLK covering how we adjust wheel bearings • Cheap c63 part 4! When... as I messed up the recording for this video.
Also another link for major more in depth service we did on my E63 M156 • Mercedes w212 e63 AMG,...
once again thank you for everyone support, like subscribe, thumbs up, comment.
I have a really good project coming up so keep a look out!
Have a great week!

Пікірлер: 59

@sprautos 4 ай бұрын

I messed up on filming the bearing adjustment, I’ve left a link in description to another video demonstrating on another job we did. I haven’t posted a video for a week or so because we have been really busy and we have a new project coming next week! I forgot had this video, it’s not the best but will keep you entertained until next week. Like and subscribe and thumbs up 👍 Hope everyone is having a good week. All the best. Also there few links in description relating to this job.

@ianpaulins7856 4 ай бұрын

I'll show you how to adjust the bearings before we put the wheels on! 🤣😂😅 Great vid by the way

@sprautos 4 ай бұрын

My bad I thought I recorded it and I didn’t. I have left a link in description doing it on another job.

@andrewcollier8137 4 ай бұрын

Filming was still good😀

@sprautos 4 ай бұрын

🙏

@Truthfullyspoken66 4 ай бұрын

Can we please get a video looking at common issues and what to look out for with the w212 (or s212) E350 face lift model? I’m sure we would all really value your knowledge on this car. Thanks

@sprautos 4 ай бұрын

We have done a video covering some Common issues on a 212 already but I’m sure we will do a buyers guide at some point.

@stephenrichardson2143 4 ай бұрын

Great video , did I miss the wheel bearing adjustment, can't wait to see the next project.

@sprautos 4 ай бұрын

Yea I messed up the recording. Link in description to another video of doing up a bearing.

@julesviolin 4 ай бұрын

I thought I was the only one who lubricated height adjustment linkages 😅 Top man

@tomthepigeon6272 4 ай бұрын

Well done mate.

@ftffighter 4 ай бұрын

Nice ride!

@xmaxbabilo 4 ай бұрын

Another superb vid. Appreciate the effort .

@djwarren5081 4 ай бұрын

Lovely car. Excellent video Sam.

@RhythmGuitarMan 4 ай бұрын

I love watching these vids. Such great attention to detail and care in looking after the cars.

@sprautos 4 ай бұрын

Glad you like them!

@Edinnbesic7 3 ай бұрын

Great 👍🏻

@markrabone6584 2 ай бұрын

Great video - I have 07 SLK 350 - great car - appreciate these videos to learn more about repairs - I still get my mechanic to do the work

@Parknest 4 ай бұрын

I had to adjust one of the front wheel bearings on my W204 C200 as it had been flagged as an advisory on a previous MoT due to slight play. Nipping it up slightly (not too much!) was good enough to get through the next MoT. I had to replace both front lower thrust arms on my C200 as they'd been flagged as an advisory on last year's MoT because of the bushes. I ended up having to fit genuine thrust arms. Pricey at £372 for the pair from a local dealer but it was money well spent because it improved the front end. That 6.2 V8 is an absolute beast. How do AMG parts prices compare to non-AMG? I've heard about the dreaded "AMG tax".

@sprautos 4 ай бұрын

Well done on the bearing job, nice easy fix. AMG tax, service items are very similar. It’s when you getting into the discs and pads, shocks, things like that they get pricey. I’ve done a video explaining some prices on my own e63 link in description.

@kevinsmith6653 3 ай бұрын

You’ve mastered it. Get shot of the lads. 😂

@phil25051 4 ай бұрын

Great video. Good to meet you today, thanks for all the hard work. When the GL comes to you for gearbox service, can you do the transfer chain? I gave her some on the way home and it slipped on hard acceleration.🙄🙄

@davidorama6690 4 ай бұрын

Camera work was fine!

@pythone.g.account5355 4 ай бұрын

👍👍👍 no probs with the vid. Maybe try a chest harness for your gopro which will free up both hands

@sprautos 4 ай бұрын

Not a bad idea 🙏👍👌

@NomadJRG 4 ай бұрын

Not much room on the M157 for doing the rear spark plugs, and I thought the C63 M156 was tight! Great content as always!

@sprautos 4 ай бұрын

Thanks 👍

@Millennial_Manc 4 ай бұрын

Great video! If you need to feed the algorithm gods but you don’t have spare hands, could you fix the phone / on a tripod etc and do a Timelapse vid and narrate over it in editing? Quick and dirty!

@sprautos 4 ай бұрын

Yea I could give that a go see what you think.

@mercboy111 3 ай бұрын

Can you do a video on de-carbonising GDI engines? 😊😊

@scotspie501douglas7 4 ай бұрын

not many people wear overhalls seen the big green tool box god knows how much that was nice cars but so expensive great channel if you owned one why would you go to main dealer

@dino69xsx 4 ай бұрын

Great video as always, video was good no problem at all Do you air con check at this service or need a request by customer !

@sprautos 4 ай бұрын

Thank you! 🙏 It’s a customer request 👍

@kerbsidemobilemechanic 4 ай бұрын

Good video still mate, not easy is it filming on ya own 😏 btw could you have got a longer screw driver for those air boxes 😂😂

@sprautos 4 ай бұрын

I don’t know how you do it ! I was thinking the same about the screw driver when I watched it back 🙈

@amber300c 4 ай бұрын

Hi mate, just wanted to know whether the sparkplug needed indexing? Enjoyed watching 🙂👍

@sprautos 4 ай бұрын

Just double check spark plug gap and toque and your good to go

@Toolboxcleaningco 4 ай бұрын

Great video again 👌 new project 🤔?

@sprautos 4 ай бұрын

Yes 😁 ! This is a good one! Hopefully post part 1 next week. Well I’m excited for it anyway I don’t know about anyone else 😂

@Toolboxcleaningco 4 ай бұрын

@sprautos Well we will join you with anticipation for part 1 👌

@sourabhsangale3952 4 ай бұрын

Waiting for a vide on s class 221 chassis om642 engine

@sprautos 4 ай бұрын

We have covered some 642 jobs On a 211 which will help.

@dino69xsx 4 ай бұрын

Also how would you know of the garage as changed the brake fluid ? Any tips to look out for ! Thank you

@sprautos 4 ай бұрын

Badly worn brake fluid turns burn, fresh is very clear. I suppose one of those pen tester we use are cheap enough to buy off Amazon.

@dino69xsx 4 ай бұрын

Thank you for your reply

@besicm1 4 ай бұрын

How do you know if the spark plug got indexed the Correct way? It's known that mb plugs do not always index the correct way even tho they are torqued to spec. Do you think this is a mthy and a sales pitch on their end to have customers not diy stuff or go to indy mechanics

@sprautos 4 ай бұрын

I always toque to spec and never had an issue. Neither have I heard of anyone else having problems when torqued.

@ConesuelaLadyTailor 4 ай бұрын

Do you fit a complete syspension arm or just the balljoint gaiter?

@sprautos 4 ай бұрын

We would fit a full arm.

@andrewmooreandrewrmoore7615 4 ай бұрын

Well done with the solo video. Hope you didn't drop anything down where it shouldn't be working single handed!!

@castrolgtx5064 4 ай бұрын

Why didn’t you show the wheel bearing adjustment? I’ve one coming in next week E Class Coupe with a lot of play in both front wheel bearings… pity you didn’t Sam but to be fair to you it’s my fault I should of messaged you this morning when I was checking it over for the repair’s next week..

@sprautos 4 ай бұрын

I messed up not filming it. left a link in description of another video where I adjusted the bearings 😉 Also mentioned it in the pinned comment at the top. I tried 😂

@castrolgtx5064 4 ай бұрын

@@sprautos Thanks Sam

@4418CARLOU 4 ай бұрын

Number eight plug had an awful lot of oil on it!

@sprautos 4 ай бұрын

Well spotted 😉

@Eastbarn1 4 ай бұрын

Hardest to reach, maybe someone missed it out at the last change?

@Adrianmazda6 4 ай бұрын

Only 130nm for the wheels....My E400 is 150nm!

@sprautos 4 ай бұрын

Is yours a 4 matic ? 130nm is correct for my chassis Mercedes - E-Class W212 E63 AMG (2009 - 2016) Lug bolt pattern (Stud pattern): 5×112 (PCD) Center bore (mm): 66.6 Offset: 52 Thread size (Lug Nut Size): Bolt - 14 x 1,50 Rims: alloy wheels, steel wheels Lug nut torque values for steel rim: 130 Nm / 96 ft/lbs Lug nut torque values for alloy rim: 130 Nm / 96 ft/lbs Correct tyre size: 255/40 R18 285/35 R18 255/35 R19 285/30 R19 245/30 R20 295/25 R20

@Adrianmazda6 4 ай бұрын

Yes it is. @@sprautos